I hope their air bags are working, 'cause they're running pretty fast in those old lizzies. And I gotta say it: those are some real pretty legs on that fiddler!
@cobbleup6 күн бұрын
Thanks a huge bunch my friend. I just went through the very same ordeal. I was stumped but your video pulled me out of it.👍👍👍
@phillipvoight51427 күн бұрын
Where can I get a oil filter system for My 30 A.
@randallstrickland82047 күн бұрын
most all the model a venders has them,I get mine from Synders
@johntait49116 күн бұрын
Outstanding musicianship. 👍
@dennisschell554316 күн бұрын
😛
@andyjones938619 күн бұрын
I've listened to this several times.She has some very tasty bow work here that I've not heard before.This is just outstanding.
@terrellprice801322 күн бұрын
The person from the MS, are you from Nita Yuma?
@williambutler862424 күн бұрын
Great video, you are a expert mechanic on the MODEL A FORD, I have a 1931 TUDOR, I have been trying to get it running, I have installed rebuild Zenith Carburetor, new points, condenser, plugs, set timing, I have fire from coil, points are firing, fresh gas, the car just won't start, it's turns over fine, it just like trying to start with switch off, I've owned this car for 19 years, it's only been a few months since it was running, any advice would be appreciated, also what are thoughts on Electronic Ignition on a MODEL A, enjoy all your videos, THANKS.
@randallstrickland820423 күн бұрын
I’m not big on the electronic ignition, I still use points, if you pull coil wire out of dist. And spin it over do you have a blue spark?
@randallstrickland820423 күн бұрын
I would also check the connection at the amp meter if they’re loose it will cause problems with starting
@randallstrickland820423 күн бұрын
I would also disconnect gas line at carb and see if you have a full stream of gas flowing
@randallstrickland820423 күн бұрын
And to eliminate a problem with carb squirt a little gas in the opening of carb and then try to start
@williambutler862423 күн бұрын
@@randallstrickland8204 I will be working on it again this week, everything you mentioned I've done except for ammeter, good spark at coil and points, steady gas flow, I'll check the ammeter and let you know what I find, THANKS.
@kirstinfalencik850224 күн бұрын
Hello there- Thank you for posting this, there aren’t many videos showing this process. Do you happen to know the part number on that reamer so I can better my search?
@richardbarrick149225 күн бұрын
She's unique as it gets!❤ Naturally talented--
@user-ug6ti3op3x27 күн бұрын
I got a book from the library titled - Eric Claptons guitar . It was a non fiction featuring Wayne Henderson during a build and commissioned guitar gift for Eric Clapton . It was more like a daily routine of Wayne's days while constructing a Dreadnought guitar for Clapton and then Wayne delivering it to Clapton. Interesting book . That was back about 2002 I believe.
@randallstrickland820423 күн бұрын
Yes I have that book also my son was working with Gerald Anderson at that time learning to build and was there when book was being written
@billyboy727 күн бұрын
What a talent!
@christopherbradley5575Ай бұрын
Impressive! These were sold mostly in Mexico. In person, I've only seen one in the US in my life. I actually never knew the engines were from Perkins. Yours looks to be in really nice condition. 👍
@Peter-ic7vjАй бұрын
Who. Is. Driving, jed. And. Granny. Clampett?
@Peter-ic7vjАй бұрын
Contact. Info. ?
@flhlimitedАй бұрын
May I add.............SHE.........is beautiful!!
@markcwynar6394Ай бұрын
I always wondered how that works, thank you!
@hanserikkratholmrasmussen6623Ай бұрын
I absolutely love it. 🥰
@erikbarrett8523Ай бұрын
This is brilliant. I was looking at doing this on my TA14 but this looks much better. I have all the Kwik Way tools to do it. What is the part number of the shell end mill and do you use the same one for A and B? It looks like you had to modify it in the gap under the cap.
@rocinbluesАй бұрын
Loved that bird.
@Rixster53Ай бұрын
Bet that AC unit blows fuses trying to keep the temp down on the hot pickin’ and playing in the workshop! Fantastic!😊
@1999zrx1100Ай бұрын
I’m in love 🥰
@tubemcgАй бұрын
Beautiful and talented - not you Wayne. Cheers from the Mississippi Delta
@randallstrickland8204Ай бұрын
85-140 gear oil
@mkmauro2792Ай бұрын
What type of oil/weight did you use in the steering box?
@petersheely7246Ай бұрын
👌👌😊
@KimberlyWeeks-v8wАй бұрын
Awesome video! Thanks Randall.😊
@davidbreeding9287Ай бұрын
Another great model a video, think a for keeping on
@helixhippieАй бұрын
As a fellow Strickland, I enjoyed your video. If you hadn't identified the location, I could have believed it was here in North Alabama.
@truthreigns7Ай бұрын
Beautiful view. and great tour
@edselsadventuresАй бұрын
Thanks for taking us along for the ride!
@huntdowse9727Ай бұрын
Real nice pictures of the farmlands on your tour.
@False_DeathАй бұрын
I love these type of events. Great footage 👍
@richardwalling9695Ай бұрын
My Dad has a 31 Model A Roadster. He drove that from Joliet Illinois to New York City in 1939 with my mother t see th Worlds Fair. Can you imagine 30 mph on Rt 30 all that way.
@Surroundedbyevil368Ай бұрын
That super cool I'd like to have one
@StevePruitt-ij1xx2 ай бұрын
Where did all the classic cars come from?
@TheBlindbowman2 ай бұрын
i have the same troy in my barn , they were the best , much heavier than the other pony and newer types ..just a all around great tiller ...
@randallstrickland82042 ай бұрын
Yes they are!
@lambbrookfarm45282 ай бұрын
I have a Garden way pony, smaller tiller, maybe older, a bit finicky but it still tills. Oats and field peas are another good cover crop that can give ya a little nitrogen.
@HomesteadDNA2 ай бұрын
Man, we started the same thing 3 years ago. Compacted clay in an acre field. And you aint lying about how hard and how much time it takes. But we are doing it anyway. Your garden looks great! Clay is hard to work, but nothing better for retention of moisture and nutrients which are hard to come by sometimes. I dont think a soil test can say anything but you need nitrogen :)
@randallstrickland82042 ай бұрын
yes we just have to keep feeding our soil,I forgot I"ve also planted soy beens to!
@craftsmans22792 ай бұрын
Marina and wayne just great job and loved your thunderbird, from daniel boone national forest cabin on the hill big howdy
@randallstrickland82042 ай бұрын
Thank you. That thunderbird is Wayne’s
@markwassman22652 ай бұрын
i had that bolt break off and got stuck in the flywheel what a mess i took the starter off and worked the flywheel with a crowbar until it popped up and i grabbed it I also pulled out another bolt as well and a lock washer with a magnet on the end of a coathanger through the starter hole got lucky i didnt have to remove the trans great video too
@randallstrickland82042 ай бұрын
Yes they can be a bugger sometimes
@vlvtopcat2 ай бұрын
Sir that's a nice tiller.Oldie and a goodie.Thanks for sharing.
@randallstrickland82042 ай бұрын
Thank you glad you enjoyed
@senzaization2 ай бұрын
Looks great Randall! Do you silage tarp the garden between seasons to suppress weeds? Fellow farmer. Keep uploading👍🏽
@randallstrickland82042 ай бұрын
Thank you. No but I planted rye and red clover and there was no room for weeds over the winter
@RT-wq8bd2 ай бұрын
Great garden! My 45 year old ServiceStar tiller just quit this year. Tines locked up but there may be a fix!
@randallstrickland82042 ай бұрын
Hope it's not to bad to fix!
@MikeV6072 ай бұрын
I have a 38 year old 8hp Troybilt Horse with a Briggs & Stratton engine - great machine.
@randallstrickland82042 ай бұрын
I think when I bought mine there were options for a 6-7-8hp at that time I had a IHC cub cadet lawn mower with a Kohler engine and it gave good service so thats why I got 7 hp, Briggs also makes a great engine
@randallstrickland82042 ай бұрын
Big boy tomatoes and I forgot the others
@cgokey54912 ай бұрын
looks like the 8hp horse, one i have had a 7hp on it, great machines mine is one of first 3 years, no model or serial # on it
@cgokey54912 ай бұрын
the first models had the gas tank mounted the other way
@randallstrickland82042 ай бұрын
Ok mine is a 7hp
@cgokey54912 ай бұрын
@@randallstrickland8204 looking at old motor i had the 6hp techumseh, the 7 is usually a kohler, the first few years had a smaller square gas tank on left side
@randallstrickland82042 ай бұрын
I’m thinking I bought mine in early 80. Wonder when the first one was made
@cgokey54912 ай бұрын
@@randallstrickland8204 from what cs there said was like 67, grandpa bought his in like 69 and serial# started early 70's
@truthreigns72 ай бұрын
May i ask what kind of tomatoes do you grow?
@randallstrickland82042 ай бұрын
Big boy and not sure about others as they were given to us, got a late start planting them
@truthreigns72 ай бұрын
@@randallstrickland8204 ok good. We might try those next year. We have the better bush (this is the first year for us on those). We normally do jet stars but they have not been good for us.
@truthreigns72 ай бұрын
Looks great
@DansAm762 ай бұрын
Looks like it was a good time.
@randallstrickland82042 ай бұрын
Yes always fun with a T and friends 😊
@Skunkhunt_422 ай бұрын
Hey Randall, did you used to own an Anderson Manolin?
@randallstrickland82042 ай бұрын
My son plays a Anderson he and Gerald were good friends,Gerald taught him to make instruments
@Skunkhunt_422 ай бұрын
@randallstrickland8204 asked bc your name sounds familiar, thought you might be the guy I bought mine from 10yrs or so ago in WNC. The man I bought it from told me to give it hell, and I have 😆