Great video. Short and to the point! 👍

Обрезать бутылку и горлышком насадить на палку. Зачем столько возни.😅

#Ray MAKES /Ray MAKES @Ray MAKES where are ya? You haven’t made a new video in 6 years, how is life what’s going on man you’re a fuckin genius with your crafts.

Not enough detail

Good job on the live center.

Why didnt you fold it , if it is a folding trailer like in the photo? and What is your forever trailer if this isnt good enough ?

How did you fold it???

hello

Did you put this extruder on some printer? Any news?

Wow, great job, i want to do this on a smaller scale to make a rc boat, unmaned, for fishing, trolling, as i sit on shore and control it.

how many miles an hour is that rated for? great Job

@RayMAKES asshol*! you never reply my comment!

Pretty decent video overall if you ignore all the crying over stupid/little issues, most caused by yourself. Also, don't put pins in tongue and you can fold it down when you flipped trailer over, and wouldn't have issue with beam above you.

Ottimo. Vorrei comprarlo. Quanto costa?

Excellent

Ray, you are "the nuts", as we say back in "The Big Smoke" (London)! You just have to be THE most relaxed filler artist in the world! We love your style, man. Just right !! 👍🌟

wow...price doubled in less than 10yrs...that's bidenomics!!

Could you make a Green lantern fidget spinner

Nice wheels. How can I get some made?

Was very interesting but background noise with Lie Nielsen made it hard to follow. Just a suggestion for next time!👍🏾

How much would that cost? I have access to black oak lots of it

Nice work 🤙

Could you do this same procces but double the size?

i feel like cleaning that is a royal pain

Excellent video. Clear content and pleasantly delivered. My compliments to anyone at home that ‘might’ have stood in the way of this logical, if not totally necessary printers! 😉

Hole saw works too. Just need to change the drill bit out for a centre punch or sharpened bolt. This vid did give me the inspiration to come up with using a hole saw though :)

Ola, preciso do link do STL. Pode passar.?

"What's in the box??"

The video is 6 yrs old, and this is the first time i saw it or your channel. Glad tocsee your modifications. I'm curious if you still use it as it was or if you modified it again. I see how you can restore the tilt feature, and I was concerned about the front leg attachment. Hope there have been no issues.

How hard is it to title a store bought trailer and how long to receive title?

Are these sold anywhere? I’m in the UK.

Iam willing to made same 3d printer is it printer i need your support and guidance how can i approach you sir Thank you sir

🌲🌳🍀Yeah, I bought one the adjustable mouth block planes and a calendar, from their catalog, around 2013 or 2015. 👍🇺🇸 U.S.A. Quality materials & craftmanship👍. 🤔Someday, when I can't use it anymore, I'll be able to $ell it to a "collector" (still have receipt), and probably get back every cent. Nice video😎🍀🌳🌲.

Your customer is obviously not the sharpest knife in the drawer. If you’re doing that kind of production quantities, the first couple jobs would easily pay for a Baileigh rdb150 or 175, then have the versatility of easily setting up for future jobs.

Very good! Seeing those metal working machines was like checking back with old friends. Thank you...

Rebel on bobber not goo deal luks ridicule really is better on original crucer

For anyone considering buying a trailer. I just went through a nightmare and not sure it's finished. It took a total of 3 stores. I went online to look for the closet store that had heavier duty one in stock. The store closet to me had none, so I went to the second closet. They told me they do not have any. They had one sitting up front on display. It turns out the one on display they are counting as inventory. I told them I'd take it and they told me no. They know these trailers are often hard to find so they trick people into coming into that store location for the trailer, only to be told they actually do not have any, even though it's sitting right in front of everyone as a display. Very crooked or at least dishonest. Anyhow, they at least call another store but it's pretty far. They confirmed they had the trailer I wanted in stock. What was interesting is the guy was clear to me that they had both matching boxes. At the time this seemed odd to say but I didn't pay much attention to it. I get to the store and pick up a couple of items and tell them I'm there to pick up the trailer. They bring it out in two boxes. The guy gets nervous because he has to fill out the title stuff. Had a 'how to' binder, I assume the store created so the paperwork gets completed correctly. It was a disaster. He was coming things out and stamping in the wrong place. I was like hey man are you sure you know what you are doing. He asked a couple of people for help. They assured me all is good with the paperwork. I ended up going to the store next to me to have a manager review because it looked off to me still. She made a correction but no stamp in front of the title. I went to get the title and registration a few days later. They basically laughed at me. Told me to get an affidavit and correct the stamp location. I went to the store closest to me again for this. She was very helpful but had to call the store manager in the place I bought it from originally. I went back to get it registered and after a lot of people reviewed the paperwork they decided to do it but advised it could come back later as not valid. So it was a nightmare going through all this. Lots of my time wasted. I hadn't even put it together yet. Now get this. I open the large box with all the parts because I wanted to paint it with a paint that would not fade like the factory paint does. What's odd is i unpack a front cross member. In my head I'm like oh wow, I thought this only came with the light weight version of the trailer. I'm like sweet, they upgraded. I take all the red parts out and paint them. Looks great. Lots of time spent on it. I planned on putting it together this weekend. Even though I've watched at least ten videos on how to put it together I decided to read the manual. I almost crapped myself. The manual is for the smaller trailer!!!! They gave me the wrong trailer!!!!! I paid for the heavy duty version and they gave me the lighter version. Wth!!! It turns out this goes back to the comment about two matching boxes. They gave me the small box of the heavy trailer which has the wheels and springs. The large box is all the framing and axle of the lighter trailer. What a joke! I've put so much time ahead work into this already without even assembling it, even have a wood deck purchased and cut. I can't return it at this point with all the registration fees paid, the frame painted and the store being an hour away. I will put it together and see how it turns out. Not happy about it at all. This also means the next person will get mixed boxes, or maybe it happened before me and I got the mixed boxes. This is just a warning for anyone thinking of getting a trailer. First, call the store to see if they are trying to be crooked by showing a display as available inventory online. Two, when they bring out two boxes make sure they match! If you make it to three, demand a manager completes the paperwork and that the manager goes slow. Any corrections or scribbles will require you to go back and get an affidavit later. If someone from Harbor Freight contacts me and makes this right I will let everyone know. I will be sharing this in many places to get the word out.

I love when hand tools are made with CNC robots.

Do you have cad program for the rudder?

Lie Nielsen planes are probably the best you can buy in the Western style, but Japanese planes are the pinnacle. They require more skill to use, but the results are outstanding if you can master them.

The big guy walking back and forth to the table in the background that just has to interrupt this great interview several times. Does he not know there is an interview going on with a camera? And right in front of the CEO too?. Does he need his 15 minutes of fame? Dude stay out of the shot please! It's distracting!

so I'm brand new to the 3d printing world trying to research how to make my own 3d filament extruder (toss shredded parts into a machine and it turns it into filament). I was really excited to see you build it step by step but was disappointed that you didnt show us the part where you toss in the pellets at the end to show that it makes filament. So I'm not even sure if thats what your machine does. for all i know maybe it shreads filament to make pellets (the opposite of what I'm trying to do).

Thank you guys this as been a absolute privilege to watch, The most enjoyable time I’ve spent in an age ,

I know this is old but I would like if anyone has the plans to let me know the 4 ft dont cut it for what I want THANKS

i have one on my Bridgeport can you show some tool bits for them please

Les mouvements de la caméra me donne le mal de mer...... Il faut, soit acheter un stabilisateur, soit changer de caméra.... Et d'objectif......

So I'm assuming at this point that this was a major fail and wasn't worth the shipping from Spain let alone the time of assembly since there's been no follow up in 5 years

You could still ise this as a machine shop, id love to have a setup like that no electricty needed,

What if i don't want to heat my other part for risk of messing up the tempering?

Exelente una pregunta yo tenco una un eje para torno similar al tuyo se puede dar unos colpeteos para que entren la pieza en el triche del eje o se puede dañar las chumaceras o que se deve hacer un saludos de ecuador