How to Replace Front Backing Shields 2012-2017 Toyota Camry

Рет қаралды 921

1A Auto: Repair Tips & Secrets Only Mechanics Know

17 күн бұрын

Buy Now!
New Brake Dust Shield Set from 1AAuto.com 1aau.to/ic/1ABRX00198
This video shows you how to install new front backing shields on your 2012-2017 Toyota Camry.
Estimated installation time for a professional technician is approximately: 2 hours 36 minutes
This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/obLm/1AXAA00013
• Pry Bar 1aau.to/oab6/1AXAA00020
• 10mm Wrench 1aau.to/oag6/1AXAA00010
• 22mm Wrench
• 10mm Socket 1aau.to/obPr/1AXAA00017
• 14mm Socket 1aau.to/ocgj/1AXAA00015
• 17mm Socket 1aau.to/ocgj/1AXAA00015
• 18mm Socket
• 19mm Socket
• 22mm Socket 1aau.to/ouL/1AXAA00266
• 30mm 12-Point Socket 1aau.to/oaw/1AAST00002
• Air Compressor
• Blowtorch
• Brake Caliper Hanger 1aau.to/onU/1AXAA00439
• Press
• Pliers
• Side Cutters
• Snap Ring Pliers
• 1/2 Inch Impact Gun 1aau.to/ozB/1AXAA00252
• 3/8 Inch Impact Gun
• Air Chisel
• Ratchet 1aau.to/ocg7/1AXAA00016
• Torque Wrench 1aau.to/objG/1AXAA00044
• Cotter Pin
• Gloves 1aau.to/obkE/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Hammer
• Pick 1aau.to/o6I/1AXAA00037
• Punch
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/ghf/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 3

@1AAuto 15 күн бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto √ Do it Yourself √ Save Money

@hectorpenamedina4817 14 күн бұрын

Dear friend. I like the video but are some thing not like. You clean the rush part and use a new bearing but when you instale again the part was new and ball joint. Why you clean it you use new part. The other thing is why not change de rush old disc with a new one. Thanks for your video.👍👍👍🙏🙏

@1AAuto 14 күн бұрын

+@hectorpenamedina4817 Thanks for the tip! We'll pass this info along to our production team.