Рет қаралды 396,945
In this video I replace and upgrade my Chevrolet Suburban 5.3L intake manifold gaskets with new updated Fel-Pro (MS98016T) gaskets. The original gaskets are routinely a problem on these GM 5.3L motors and I think I was having a problem with them anyways so I decided to swap them. It wasn't a very difficult job, just time consuming.
I also swapped out the original knock sensors and harness just because I was already in there and had access... My original knock sensors were in like new condition but might as well swap them with OEM parts from ACDelco.
Below you'll find the products and tools I used in this video!
Fel-Pro MS98016T Gasket Set: amzn.to/2x36G7e
TEKTON 90° Bent Pliers: amzn.to/2NycJuz
Lisle 39400 Angled Disconnect Tool Set: amzn.to/2x63YOU
Permatex 81160 High-Temp Red RTV: amzn.to/2Nz3af3
Dorman 917-033 Knock Sensor Harness: amzn.to/2oXVs07
ACDelco 213-3521 Ignition Knock Sensor: amzn.to/2oY7lmD
**This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional. The methods I use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Working on cars is extremely dangerous. I am not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
FTC Disclaimer: I am an Amazon affiliate. As such, I earn a percentage of sales made through Amazon Affiliate links found in the description of my videos and on my website and other places.