No video

2007 Freightliner Detroit 14L Rebuild (Part 2)

  Рет қаралды 34,188

curtisnstacey

curtisnstacey

4 жыл бұрын

Part 2 of the rebuild

Пікірлер: 37
@eby6114
@eby6114 3 жыл бұрын
Dude, if I had your memory. Holy crap! Thanks for the video
@curtisnstacey
@curtisnstacey 3 жыл бұрын
Lol. Yeah man for sure. I'll be posting more videos in just a bit. About the egr, vpod and vpod harness. Thanks for stopping by bro!
@eby6114
@eby6114 3 жыл бұрын
@@curtisnstacey Just downloaded a manual from ebay. Over 2300 pages but no reference to engine overhaul 😂. Do you remember who you bought it from or does your manual also have the 12.7 version. If so do you want to sell me a copy. Thanks. Love the videos Scratch that. It would appear that the search should be Detroit 60 series not Freightliner Columbia 😂
@curtisnstacey
@curtisnstacey 3 жыл бұрын
@@eby6114 LOL. yea Detroit 60 series. the manual does not state anything about the overhaul. you have to go in order. for example: go to the manual and it'll tell you how to change pistons. from there it'll say remove head and refer to chapter blah blah blah, then remove injectors refer to chapter blah blah. thats how i done it. i spend countless hours every night studying each section i had to do in order. DONT SKIP ANYTHING. and use the items it says use, example: folks use motor oil on the head bolts when installing, the book says use the detroit crap that goes on the bolts it was like $80 for that little can. little things like that. i left no stone unturned. if you need help i'll do the best i can. just ask questions and i'll get to it.
@ThetrueTeddyB
@ThetrueTeddyB Жыл бұрын
Plenty of tools, but where's the beer? 🤔 just kidding driver. Be safe out there
@curtisnstacey
@curtisnstacey Жыл бұрын
it was afterwards of course. lol.
@ISLANDTRUCKER
@ISLANDTRUCKER 4 жыл бұрын
Great detail video, if i have to do mine this will come in handy 👍
@curtisnstacey
@curtisnstacey 3 жыл бұрын
Thanks for watching!! I appreciate it
@tylerhorner4387
@tylerhorner4387 4 жыл бұрын
Be careful on that rear Jake brake nut, hard to reach and easy to drop. Depending on your miles, you might consider rebuilding your Jake's, Detroit recommends it at 500k. Kit cost about $140. There is a special tool, but it's not absolutely required, I bought it, and it was $65. Have you considered doing an EGR delete? I'm no mechanic either, but like turning wrenches when I can. I've got an 06 Century with a 14L, 1.37 million miles and not been overhauled, so these videos are gonna be valuable as I'd like to do my own inframe. Awesome job man, good luck to you!!!!
@curtisnstacey
@curtisnstacey 4 жыл бұрын
i'll have to look again, but i think my truck has 1.3 as well. lol. mine still ran excellent just the water in the oil. if you havent seen part 1 you should see all the coolant i drained out of the oil pan on video. ouch!
@curtisnstacey
@curtisnstacey 4 жыл бұрын
as far as the egr delete ive been thnking of that "ugly fix" since its just a plug n play type thing
@tylerhorner4387
@tylerhorner4387 4 жыл бұрын
@@curtisnstacey don't do that, it kinda messes the fuel, ie makes it run a little lean, it'll work but not the best fix. I pulled all EGR stuff off, replaced exhaust manifold, added Borg Warner turbo, and sent my ECM to Leon....truck is now an absolute beast, added close to .5 mpg too.
@curtisnstacey
@curtisnstacey 4 жыл бұрын
@@tylerhorner4387 who this "Leon". i think i want to delete. how do i get in touch with this person. thanks
@georgegeorgepht
@georgegeorgepht 4 жыл бұрын
I been using the ugly fix for years. I never knew it makes it run lean. I hooked the dealer engine scanner up and then I hooked the factory oil in also. And the only thing that changed was the the braometric sensor pressure. It Went from 4 to 18 with the ugly fox plugged in and the turbo was open to 100% availability. Normally the turbo is set at 80 percent availability. That’s why it coughs like it does. The 14 liter is choking. With the ugly fix it opens up the turbo and closes the egr flap. Works great if you ask me. But do you have exact info as to how it makes it run lean? Does it change the mapping ? Does it change some setting in the ecm other then what I saw when I hooked the dealer computer up??? Maybe I missed something ??
@georgegeorgepht
@georgegeorgepht 4 жыл бұрын
On the time omg for these Detroit’s I learned that one tooth advance is 50 hp. That came from a 30 year detriot tech who told me. He been working on them for 30 years. He knew what the deal was. When I took my western star off I went to pin the timing and noticed the top wouldn’t line up with the bottom for nothing. I noticed it was one tooth off. Then found out the previous owner must of advanced the timing to get more hp.
@curtisnstacey
@curtisnstacey 4 жыл бұрын
i was told if your one tooth out it wont run right.... i was told that several times before i started this. im not a mechanic. maybe your right. i would have been to afraid to try it
@georgegeorgepht
@georgegeorgepht 3 жыл бұрын
@@curtisnstacey id be afraid to try it also. After I tore my western Star apart, I found block damage and had to take it to dealer to make sure it gets done right. I had them set it to factory timing. No warranty otherwise.
@ibcalm24
@ibcalm24 3 жыл бұрын
I just use the idler gear to turn the engine over. Not fighting with that tight crankshaft. It's a lot easier
@curtisnstacey
@curtisnstacey 3 жыл бұрын
I never considered it a fight. You gotta be strong my man!
@ibcalm24
@ibcalm24 3 жыл бұрын
@@curtisnstacey You did good work. All the best
@wdheaden
@wdheaden 3 жыл бұрын
Where did you buy the Manuel from to do the inframe
@curtisnstacey
@curtisnstacey 3 жыл бұрын
i got the manual from ebay. sent via email pdf format
@gilbertodiaz5620
@gilbertodiaz5620 3 жыл бұрын
Hi I’m looking to buy a truck I saw this fright liner Colombia 2007 with 1million they asking for 12,000 that have not done overhaul u think if I buy it it will need the overhaul anytime soon I drove the truck runs good and strong with all new tires and clean from in and out just not sure. To buy it any ideas ??? Thanks
@curtisnstacey
@curtisnstacey 3 жыл бұрын
You gotta be extra careful when buying trucks with over 1 million miles. I did the same thing as your trying to do and it bit me in the ass. The truck ran great but coolant was very slowly getting into the oil and that's something you can't spot just by looking or driving it. The only sure way is to drop the oil pan and pressurize the coolant system and see if any coolant comes down from the bottom end. Just be careful it happened to me and i had to do this because i couldn't afford a shop rebuild and the seller lied to me. If you can get some sort of warranty, at least 90 days maybe you'll be ok. IF you can do that. Again, just be careful buddy, there are some sneaky human beings out there.
@mileswatkins2162
@mileswatkins2162 3 жыл бұрын
Where did you find the book to do the removal
@curtisnstacey
@curtisnstacey 3 жыл бұрын
i bought a pdf from ebay.
@caseycallahan8767
@caseycallahan8767 4 жыл бұрын
I've been a mechanic for over 40 years and still don't know why people say they turn wrenches. I've always pulled or pushed wrenches in order to turn nuts and/or bolts. What am I missing here?
@willmann30
@willmann30 3 жыл бұрын
You're missing personality 🙄
@curtisnstacey
@curtisnstacey 3 жыл бұрын
@@willmann30 COMMENT OF THE YEAR!!!
@willmann30
@willmann30 3 жыл бұрын
@@curtisnstacey 👍🏾👍🏾
@clarenceswift3
@clarenceswift3 4 жыл бұрын
What vook are you referring to when doing your rebuild i have the same amount of mile and would like to do my own in frame and would like to purchSe the book you speak of
@KulinBan777
@KulinBan777 4 жыл бұрын
You don't need a book, you're gonna learn way more just watching these kind of videos on KZfaq, thank God there a whole bunch of them cause when it comes to owning your own truck you better learn how to fix it, at least minor repairs
@venanciotavares1636
@venanciotavares1636 4 жыл бұрын
Awesome video.wich book is that one .I will buy one .please send me the reference
@ibcalm24
@ibcalm24 3 жыл бұрын
@@venanciotavares1636 Detroit series 60 service manual
@curtisnstacey
@curtisnstacey 2 жыл бұрын
go no North Throttle RC Waffles on facebook. win prizes for you guys with rc hobbies or just win cash!!
2007 Freightliner Detroit 14L Rebuild (Part 3)
4:01
curtisnstacey
Рет қаралды 8 М.
Freightliner Century 14L Series 60 Injector Change
7:48
Pedro Fuentes
Рет қаралды 90 М.
天使救了路飞!#天使#小丑#路飞#家庭
00:35
家庭搞笑日记
Рет қаралды 63 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 37 МЛН
Кадр сыртындағы қызықтар | Келінжан
00:16
60 Series Overhead Part 1
17:24
Joseph Gingerich
Рет қаралды 49 М.
Detroit series 60 in frame rebuild (part 2) valve cover removal.
10:22
Gordon Robertson DIY
Рет қаралды 72 М.
Series 60 bullgear
5:56
Tim Smith
Рет қаралды 52 М.
Swapping Detroit 60 Series Engine
17:36
That Prosperity Life
Рет қаралды 9 М.
Detroit series 60 in frame rebuild (part 4) camshaft removal
12:19
Gordon Robertson DIY
Рет қаралды 133 М.
2007 Freightliner Detroit 14L Rebuild (Part 5)
8:24
curtisnstacey
Рет қаралды 6 М.
Cold Starting a 8V71 Two Stroke Detroit Diesel Engine at 15° F
9:22