2007 Nissan Sentra engine mount replacement

Рет қаралды 82,641

6 жыл бұрын

Shaking engine? the engine mount is one of the reason. Welcome to Kuwahara Auto Service. This video is about 2007 Nissan Sentra engine mount replacement. Here is how to replace it.
~-~~-~~~-~~-~
Please watch: "2005 Chevrolet Malibu Power Window Problems and Solution"
• 2005 Chevrolet Malibu ...
~-~~-~~~-~~-~

Пікірлер: 75

@Litto1 6 жыл бұрын

Please use jack stands next time. Those blocks of wood had me nervous. Great video. Keep up the good work. Safety first.

@kszone2140 6 жыл бұрын

Thank you so much for the great advice. You are absolutely right. I recently purchased Jack Stands. I am using it for my safety.

@kszone2140 5 жыл бұрын

Thank you so much. You are absolutely right, safety first. I recently purchased jack and stand.

@freedomfyter 3 жыл бұрын

Food or jack stands what would you pick?

@rickprime83 8 ай бұрын

Thanks I have a 2009 Sentra and now I know how to change it at home, great video!

@darienchiba5060 5 жыл бұрын

Think this video helped me figured out what might be wrong with my Sentra. Thanks!

@pierrewilliams6771 4 жыл бұрын

Going to check out mine now. I have a 2011, been bugging me for a while now.

@Dzacu4 3 жыл бұрын

have you got film how to replace other two mounts?

@khizarmuhammad3576 3 жыл бұрын

Great video, thank you for the help!

@JoseHerrera-ub8kc Жыл бұрын

Thank you buddy this is a very good video

@fernandotrujillo3809 Жыл бұрын

I have a feel 2008 automatic from 20 to 40 speed it vibrates I stop accelerating and it speeds up as I try to align and it works normal will it be the gearbox or engine support?

@UNLVRich 4 жыл бұрын

Tip: use a tap to clean the threads in the sub-frame :)

@ezequielmurillo7277 5 жыл бұрын

So helpful, thank you.

@kszone2140 5 жыл бұрын

I am happy the video was helpful!!

@damariussweeting900 3 жыл бұрын

Nice I need to do that same task and torque mount on a 07 nisssn blue bird sylphy and then check the other mounts

@lambodp 3 жыл бұрын

Your "secret technique" with 2 wrenches is no match for my triple wrench technique we used in combination with a short section of allen wrench to loosen a stubborn BMW transmission fill bolt. Haha, all kidding aside, thanks for the informative video!

@jaycee7569 Жыл бұрын

That's awesome. Ty so much.

@mannydiaz2329 3 жыл бұрын

Thank you,

@Hagay_Insurance_Finance 2 жыл бұрын

Were can i buy new engine mounts for nissan micra 2007?

@esmatwahdi2797 Жыл бұрын

Does this mount fit Nissan Note 1.2 2014 E12

@kingvenomc1447 8 ай бұрын

Thank you

@kemarslater5968 Жыл бұрын

Good 👍 job 👍

@garypeters6049 2 жыл бұрын

Good video ,much easier than that looks ,use some power tools next time,jack stands,muscle helps too

@jankeylalla6071 Жыл бұрын

Good job

@BrokenLuxury777 Жыл бұрын

Breaker bar works even better w/ 18mm

@d-s-ll2378 5 жыл бұрын

REAL DIYAUTO SPIRIT! but be careful safty. Please c hock the rear wheel, hand brake of course. better use jack stand or some wood block stand.

@Esuper1 2 жыл бұрын

If you;re gonna use wood as a jack stand use a single piece of wood instead fo many and if only have many then nail them together so they dont slip. Also, hit that rusted screw with a nice wire brush before putting it back.

@martinromo8124 5 жыл бұрын

Use a pair of jack stand and a impact rench

@steeviekouadio9311 5 жыл бұрын

I have the same problem on my 2008 Nissan Versa

@catachiloafter3160 5 жыл бұрын

Hey would this cause a clunk when I brake and accelerate I changed everything else except for the mounts

@nzjemountfort 4 жыл бұрын

yes, we had the exact same mount fail on the exact same car. An intermittent "clack" noise

@JoeRycoVideos 3 жыл бұрын

did you identify the problem? im trying to determine the same thing, hitting the gas as smoothly as possible sometimes results ina clunk and jerk of car forward

@carlostorres6334 3 жыл бұрын

@@JoeRycoVideosthat's exactly the same my 2010 sentra does, a clunk that move forward, I'm about to change the mount myself following this tutorial, thank you so much, I hope that will fix the problem.

@plshelp2906 2 жыл бұрын

@@carlostorres6334 did you change your mount? I have the same issue

@carlostorres6334 2 жыл бұрын

@@plshelp2906Hey! Not yet, I've changed the front and back shocks absorbed suspensions and still have that clumped sound, I'm 100% sure it's the driver side motor mount which it's very difficult to change, I've changed once myself but in the summer time, it takes a lot of work, I purchased online in nissan parts about a year and half ago, I pay about $254 dollars for it, original parts, now I'm waiting for weather to get good to check it up again and replace it if that's the problem, ok salute!

@eduardvila9724 6 жыл бұрын

✌👌

@amorzz100 Жыл бұрын

👍🏽

@hondacx650crestoringxxxttt 6 жыл бұрын

you needed to jack up the engine a little bit and the bolt would have been easy to unscrew maybe next time you can try it.

@kszone2140 6 жыл бұрын

Oh, that is might be the reason why the one of bolt takes time to take off. I will do that. Thanks for the advice. Blue Rider.

@berenicerodriguez9373 6 жыл бұрын

What's the torque for the mounts

@ThatOneGuy-f2p 5 жыл бұрын

@@berenicerodriguez9373 tight

@johnbartrambrooks8882 4 жыл бұрын

80 ft lbs is good

@Esuper1 2 жыл бұрын

@@berenicerodriguez9373 Tight!

@drrose226 2 жыл бұрын

Can you please tell me the name of the replacement screws ASAP please.

@kszone2140 2 жыл бұрын

I am. It sure the name of the bolt to holding the mount. But you can ask local auto shops!

@SuperEgyptian2011 6 жыл бұрын

Is this the front or rear mount?

@kszone2140 6 жыл бұрын

This is front mount

@BPoweredLove 4 жыл бұрын

Never use a jack to support the car. Use a stack of books or magazines instead. If you don't have enough books, just go into the kitchen and grab some cans of food and stack them under the frame of the car. That works as well.

@johnbartrambrooks8882 4 жыл бұрын

Buy a cheap set of rubberlike ramps and chock the rear wheels.

@csunahara7476 4 жыл бұрын

Sound like you just learn how to fixed a car

@mariachisoldemitierra1438 3 жыл бұрын

Que marca es mejor de soporte del motor lado derecho del sentra 2010 para comprarlo

@robertgreenfield9051 2 жыл бұрын

Lol

@ewarts4755 3 жыл бұрын

Nm?

@shemrock29 6 жыл бұрын

bro you need some tools like a set of sockets breaker bar ratchet and a impact spanners don't cut it anymore

@kszone2140 6 жыл бұрын

You are right brother. But at that time I had not enough money to purchase other tools. But I recently got a breaker bar rachet. So I could do better in the future projects. Thanks your comment.

@professorcastle7168 4 жыл бұрын

Thanks for your support anyways! I truly appreciate this video

@michelle-bx6ji Жыл бұрын

this gentleman needs some lessons on making the car safe

@leydiviridianasandovallope7131 6 жыл бұрын

What is the name of that piece? Is that why my car moves a lot in potholes? I'm sorry my English is very bad

@kszone2140 6 жыл бұрын

Hey don't worry my friend, my English is bad too. I am still studying. Anyway, the piece I replaced was called "Engine Mount". If there is no mount then, your car will shake when you put gas. Hopefuly that is answered your question. let me know if you have more questions.

@nightynine4061 5 жыл бұрын

If your car is going up and down on potholes check your suspension. Shocks and struts.

@g8u893 5 жыл бұрын

Torque strut/ rod (rear)

@wolftripplex3818 5 жыл бұрын

@@nightynine4061 a question for you and hope you can help, my sentra makes a noise when I go over speed bumps, any idea what it may be?

@doityourselfrepairs5202 5 жыл бұрын

@@wolftripplex3818 check the stabalising bar mounts or could be your struts

@CassandraDeal 6 жыл бұрын

This is a lot harder then it seems. Haha 2 hours later still in the process of removing one of the two bolts

@kszone2140 6 жыл бұрын

Hey Cassandra, thanks for watching my video. Were you able to remove the bolt? I know those bolts are so hard to remove. I had a hard time to deal with one bolt it was so very rusty. but hey, we saved some money!!

@avierthorpe627 4 жыл бұрын

Lol

@javiercruz5096 4 жыл бұрын