Motor Mount Replacement 2010 Nissan Sentra
Рет қаралды 8,627
2 жыл бұрынWhat's up guys, mike the hobbyist, when is a Motor mount replacement necessary? If your engine clunks when you put it into gear, that usually means bad motor mounts. today we are working on a Nissan Sentra and replacing both motor mounts. hope this helps and thanks for watching.
I have merch!!!!
www.thehobbyistco.com
#badmotormounts # DIY
@earthdigger1001 2 жыл бұрын
Good video. Looking forward to seeing whats to come.
@mikethehobbyist 2 жыл бұрын
Thanks for the comment
@AndrewGrey22 2 жыл бұрын
Thanks. I needed this.
@mikethehobbyist 2 жыл бұрын
Glad I could be of help
@lowspeed2000 10 ай бұрын
What did you torque it to?
@robsmoove5765 Жыл бұрын
This is somewhat the same set up as a 2012 base model as well?
@latincalifas5365 2 жыл бұрын
Hey bro would your car make a wired noise when on. My makes a rattling noise . I tough it was the tentioner
@mikethehobbyist 2 жыл бұрын
That would depend on Where the rattling is coming from and the severity. Also makes sure you aren't hearing injection ticks sometimes it can sound like valve train but it's actually just injectors. I don't think a Tensioner would make a a rattling noise, I can't say much though cause I haven't seen or heard what you are talking about.
@damiondskismith6697 2 жыл бұрын
on my transmission torque strut, that sleeve on top bolt is ceased, I see your old one came off easy, any idea on removing it?
@mikethehobbyist 2 жыл бұрын
good question, If its ceased on the bolt i would spray it with pb-blaster or wd-40, and try to either break it by cutting the old rubber away and grabbing it with channel locks/vice grips or sometimes rapping the head of the bolt can shock it enough to make it come free. that is what i would do first. thanks for commenting😀
@noswa3055 2 жыл бұрын
@@mikethehobbyist what's the labor for the motor mounts and transmission mounts?? Any quote
@mikethehobbyist 2 жыл бұрын
@@noswa3055 email me @ Thewvhobbyist@gmail.com and I can provide a quote
@stanga811 2 жыл бұрын
hey man can i get a photo of the 2 bolts ? 1:35
@MansaX 2 жыл бұрын
Where do I place the jack?
@mikethehobbyist 2 жыл бұрын
That would depend on the mount being replaced, generally I would place it under the oil pan or transmission pan, or a place that can support the engine and trans. It doesn't take much though
@MansaX 2 жыл бұрын
I checked the top (the same one in the video) and it's solid so I have to go to the bottom. Thanks for responding
Mirage Mechanical
Рет қаралды 103 М.
FACILEISHON
Рет қаралды 68 М.
Simple Creative
Рет қаралды 19 МЛН