How to replace the lower control arm on a 2014 Mercedes CLA 250.
Пікірлер: 10
@richardortiz57094 ай бұрын
What brand of lower control arm did you replace it with?
@aleximukhin490 Жыл бұрын
Hey so quick question. How did you tighten that one bolt in the back. It has a nut and I couldn't find a way to access it. Thx
@elonmusk8667 Жыл бұрын
Great video....how did you know the control arms needed to be replaced?
@TexThaiAuto11 ай бұрын
Ball joint was completely shot and if you move the arm around with a pry bar you’ll see the bushing is torn or weak.
@Pure.game.since.90 Жыл бұрын
Can you tell me exactly which tool size and sockets were used im working on mine this weeknd
@ricardoflores5711 Жыл бұрын
How many mileage does your cla have to be doing this type of service??
@JanKowalski-kp9kh9 ай бұрын
Hi . How many miles on clock so ball joint gone?
@TexThaiAuto8 ай бұрын
I’m confused with your question please elaborate
@nattawutprongsirikul342511 ай бұрын
I just got my control arms replaced. Whenever I try to do a full turn left/right, there always is a tugging/cranking sound when I’m at position 3.5/4 of the full turn. Noise probably from the bushing that mounts to the car’s frame (the one with 3 bolts). I’m guessing it’s probably due to the installation. Any tips on the installation or any experience with this kind of issue?
@nattawutprongsirikul342511 ай бұрын
thinking super optimistic is that the new bushing rubber is quite new and tough, so when I try to do a full turn, the control arms gets turned and the bushing also gets turned, since the rubber is still in new condition, it tries to turn the whole bushing too which is tightened with torque and causes the tugging sound. Let me know your opinion on my theory 😂