2017-2021 Chrysler Pacifica front bumper removal DIY

Рет қаралды 23,863

James P

3 жыл бұрын

Just a simple and quick DIY vid I put together on removing the front bumper on a 2017-2020 Chrysler Pacifica.

Пікірлер: 31

@user-yc3iu3bd2l 9 ай бұрын

Your video saved me from going to the dealer. The front parking sensor got knocked back inside the bumper cover. I was able to reinsert it back in place. Thanks!

@downthesight Жыл бұрын

Thank you sir. Just the video I needed

@flytopete 8 күн бұрын

Great video.thanks

@logancody8841 10 ай бұрын

Absolutely perfect, well done, Lad.

@christopherkerr2254 2 жыл бұрын

Thank you for the video!! Having to replace the radiator in my 2018 Pacifica. This video saved me several hours. Best Regards

@seatime674 Жыл бұрын

Did you get that radiator replaced okay? Surprising that went out on an 18.

@ltdtmy 11 ай бұрын

Mines is a 20 and needs a radiator 😢

@pfonkcustoms4112 Жыл бұрын

Thank you so much for this video I mean I'm a body man but this was a weird side detachment for me thank you again I didn't understand about pulling the tab down that's the most important part of this video the rest is basic thanks again

@GreyRockOne 3 жыл бұрын

Perfect! Just what the doctor ordered. I've been waiting for a post like this. I want to upgrade my Halogen DRL hardware (Touring L+) to see if I can use the LED strip over the halogen hi-beams as the DRL. I'm hoping just the LED module and control module (which I have from a Limited) is all I need, we'll see. Thanks! You should post on how your replacement HID Ballast went. Thanks

@Jennifer-sx2en 6 ай бұрын

So helpful! Thank you!

@techguy3424 2 жыл бұрын

Some of the clips are visible under the headlights, making it sag any suggestions for popping it back in

@notsure46911 4 ай бұрын

I had the same issue. When I removed my fascia, it popped the headlight off a peg too. I had to take the bumper off again and get the headlight reseated. Once the headlights are on properly, the fascia fits better. No more sagging under the headlight.

@kevinvasquez5408 2 ай бұрын

Thank youu

@economico2313 3 жыл бұрын

nice video. thank you

@dcloes 2 жыл бұрын

Thanks for this. My washerfluid reservoir is leaking and I think this will be very helpful. Does yours have the parking assist? Looks like your bumper has the circle, so thinking yes.

@JamesAMG 2 жыл бұрын

Yea it’s a Limited and has all the safety tech features. All those items disconnect from just one single harness.

@miguelcruz-lg3gq Жыл бұрын

Thank you very much God blessed you

@mguerramd 4 ай бұрын

Do you know if it’s necessary to do this to get to the transmission lines to do a flush?

@user-qj7kt4br4s 3 ай бұрын

Is the headlight ballast you replaced on the bottom of the headlights? And do you happen to know if right and left have different part numbers for the ballast?

@JamesAMG 3 ай бұрын

Unfortunately, I don’t know for sure, however, I believe the ballasts are identical between left and right side. Yes, the ballast is thing mounted at the bottom of the headlight. 👍🏼

@Mike_44 6 ай бұрын

I’m having the hardest time removing the main connector on the driver side.. 🤦🏻‍♂️

@attiliofiordirosa 2 жыл бұрын

Great video. I have to change my ballast on the same car. Do you recall the part number for the ballast? I see a few different ones online.

@JamesAMG 2 жыл бұрын

Unfortunately I don’t, but the initial mistake I made was I bought the LED DRL module instead as I thought that was the ballast. Just make sure you buy the right thing. Look on eBay, the ballast is the small module with the orange rubber seal on the one side as well as a yellow lightning bolt sticker. Search “Pacifica ballast” on eBay and you’ll see them.

@attiliofiordirosa 2 жыл бұрын

@@JamesAMG thanks, this is helpful. I actually have to change the DRL ballast. Did you have to take the whole headlight assembly off to change the ballast.