3 Cool 😎 Tools You Never Knew About, Until Now!

Рет қаралды 536,532

Жыл бұрын

These three tools are from a company called TrigJig. #shorts This company is based out of Great Britain. This video is not sponsored. Some product links are Amazon and other affiliate links which means if you buy something we'll receive a small commission. This helps support my channel so I can continue to make content like this.
Videos To Watch Next
5 Tools Under $30 - • 5 Tools Under $30 Ever...
TrigJig Tools - trigjig.us
PLANS: www.731woodworks.com/store
Greatest Free Gift I've Ever Received: story4.us/731Woodworks
Follow me on Amazon for more tool reviews: www.amazon.com/shop/influence...
Join this channel's Patreon to get access to exclusive member only behind the scenes videos, member only livestreams, discounts, and other cool member only perks! / 731woodworks
Join this channel to get access to perks:
/ @731woodworks
Get $10 off any order of stickers, labels and more using this link: www.stickermule.com/unlock?re...
Disclaimer: Please see the link for our disclaimer policy for all of our videos on the 731 Woodworks KZfaq channel www.731woodworks.com/youtubed...
#tools #woodworking

Пікірлер: 75

@731Woodworks Жыл бұрын

🎥 WATCH 5 Tools Under $30 - kzfaq.info/get/bejne/sLOmfpir3t7VoX0.html 🛒 TOOLS IN VIDEO TrigJig Tools - trigjig.us

@jonlanier_ Жыл бұрын

I've been wood working for over 45 years. No way in the world am I going to spend that kind of money on something when a fraction of the cost tool will do the same thing. You all have lost your minds.

@Cheshire-Coatings Жыл бұрын

My thoughts exactly!

@giggidygiggidy4884 Жыл бұрын

$74, $152, $92, consecutively for these tools in Australian dollars. Yeah I’ll have to give ‘em a miss.

@michaelm748 Жыл бұрын

Yeah felt exactly the same... I thought I'd have to mortgage my house to get the three of them. :/

@Yaroslav_Tselovanskyi Жыл бұрын

It's cheaper to use metric than these unnecessarily complicated tools.

@user-yl7lq1lh8l Жыл бұрын

Immediately went to buy the Micro Trim Square, but it's £59.99, current exchange rate makes that 70.95USD. Very expensive, not under $30 for me :(

@m00seknucklejohnson45 Жыл бұрын

I was just thinking the same thing and was wondering how much they were....but they do look like quality made tools. As they say “buy once, cry once.” Lol

@PabloEskimofo Жыл бұрын

Drill some holes in a trim square. Dunno if that would actually work, but it’s worth a shot

@pretenda Жыл бұрын

Hoooollleeeee that’s expensive

@WireWeHere Жыл бұрын

Looks like shipping isn't quite free, it's included in the price and covers low Earth orbit too. I have 3 of their toys and they are as good as they look. Now I'm thinking verbal thank you's wasn't enough.

@fuddrucker74 Жыл бұрын

They use the VAT (value added tax). If they're "including" shipping its built into the price. That's usually only domestic pricing related with international shipping excluded, but these cats are doing it.

@Dr.Vincent_D_Gilmer Жыл бұрын

Are they worth the price?

@mattberg6816 Жыл бұрын

A good combination square set will do all that and so much more

@HBSuccess Жыл бұрын

100%. But then you’re not a tool junkie 😂

@loganrench5680 11 ай бұрын

I love the angle finder i dont use it for woodworking i use i for metal fabrication

@Yaroslav_Tselovanskyi Жыл бұрын

The efforts that Americans would go through to not simply use metric is hilarious to watch 😂

@uther10 Жыл бұрын

Really nice tools! Thanks for sharing!

@Cheshire-Coatings Жыл бұрын

Under $30, what site are you looking at!?? Pocket Sq $79 Angle finder $69 Micro trim Sq $69 I'd ship to the states charging prices like that 🤷‍♂️

@731Woodworks Жыл бұрын

I never said these were under $30. The link is to another video showing tools under $30

@richardwakelin843 Жыл бұрын

still using my grand dad's tools. they still work perfectly

@littleshepherdfarm2128 Жыл бұрын

Cool little set.

@Matt_justlikethat Жыл бұрын

Use a r-bevel for any angle. Nice products 👍👍

@JohnnyHildebrand1969 Жыл бұрын

Cool. I really thinking about getting out of welding and back into carpentry work. Good advice. Appreciate your help.

@RogersTM87 Жыл бұрын

I'd love to have a little pocket square that be hand for work I do

@WildbillTheWizard Жыл бұрын

I'm just more impressed somebody else using a Pentel graphtec pencil lol. Best pencils ever.

@rochajose16 2 ай бұрын

Where can we order those tools

@lindboknifeandtool Жыл бұрын

That wood is beautiful

@Joel-Rubearsdad Жыл бұрын

A British company using imperial measurements? Nobody I’ve worked with in England uses imperial anymore, my dad even started with imperial at school and learned the metric system as it’s better

@BrainFizz Жыл бұрын

I use imperial almost exclusively,but then again most of my work involves restoring woodwork that dates back to when imperial measurements were standard.

@Joel-Rubearsdad Жыл бұрын

@@BrainFizz that’s understandable mate, I’d love to have a job similar to yours as restoring old things is something I find very fulfilling, especially old hand made things when you can see the mastery that old craftsman possessed

@clion520 Жыл бұрын

I mean it's pretty cool and I do like the extra steps on the triangle but it's pretty much the same cost as woodpecker

@gabevalerio1982 Жыл бұрын

Gonna make me get in trouble

@alanphillips1344 Жыл бұрын

Shocked by the pricing. Sorry but this and woodpecker are way way too high.

@thomasblaylock8528 Жыл бұрын

Impressive

@craigshrimpton5765 Жыл бұрын

Where can you get them in metric.

@solosniper86 Жыл бұрын

I want all three

@pattyofurniture100 Жыл бұрын

My biggest complaint about my incra t rule is that the holes are too small for even my mechanical pencil

@ChrisHornberger Жыл бұрын

Yeah, the idea of always using .5mm no matter what is a little silly. :(

@bryanharness1122 Жыл бұрын

Was hoping for a cheaper version of woodpecker. At this price might as well buy the red version and it's usa based

@jaboff-road1776 Жыл бұрын

Swanson speed, square

@brad238899 Жыл бұрын

Trig Jig sounds like another creative English insult.

@tylertowler7801 Жыл бұрын

That's pretty awesome

@thomasdmuchowski301 Жыл бұрын

Or buy all 3 tools made by most other companies for the price of one of these tools …. In my world tools get used … a lot and nothing lasts forever soo in retro spect no keep ur fancy soft anodized aluminum I’ll stick to the old school tough as nails tools that are made for working not as a display

@FahimibnDawud Жыл бұрын

Welp.. my wife's going to hate you, because I'm about to get this ordered and on the way!

@ceterfo Жыл бұрын

That pocket square is dumb if I'm going to hey good money for a good square you can machine a couple extra holes that step isn't clever that's annoying.

@thepitpatrol Жыл бұрын

Very nice

@jasonnester9514 Жыл бұрын

I was given a t bevel but I can’t for the life of me figure out how to use it

@justinkayce9811 Жыл бұрын

Not like the saddle, can’t mark on both face and edge.

@jimmyjohnstevens3898 Жыл бұрын

Still kinda pricy like woodpeckers

@jameskirk3 Жыл бұрын

Every bit as expensive as Stabila, Starrett, or Woodpecker? They look decent, just expensive, as per the standard for our vanity tools. At least they aren't on Bridge City pricing.

@6h471 Жыл бұрын

None of this stuff is anywhere near as accurate or capable as a framing square.

@SnowingNapalm Жыл бұрын

Nice

@brianparker9924 Жыл бұрын

That's how they get ya. First your using their tools and before you know it, you're working in metric

@SIRRONW Жыл бұрын

Way too expensive for a beginner..

@ChrisHornberger Жыл бұрын

Quality costs. Buy cheap, get crap results.

@jonlanier_ Жыл бұрын

Only if you don't have a clue what you are doing. Go get an apprenticeship with an old guy who's been around. Never in the world would he own this expensive crap.

@ChrisHornberger Жыл бұрын

@@jonlanier_ Yes and no. A bad tool that isn't correctible, or can't be "tuned up" with minimal to reasonable effort will magnify your results (mistakes) - usually in the worst ways possible - many times over. I'm never the guy to say " you have to spend the most you can on tools ". Ever. I have a fair number of Harbor Freight things that I use every day, for instance... but some things you need to make sure they're spot on, and as one example, if I have to do all the geometry to shave and re-angle a try square or a combination square, for instance, my time is worth way more than those hours - days? - when a known good one from a reputable maker like Sterritt or Veritas is well worth the money (aka, my time). $.02

@trindal359 Жыл бұрын

Now i feel like an old ignorant hayseed hick. I was doing ok earlier, thanks a bunch. It looks like a spaceship or something from NASA

@SuperAnimal1970 Жыл бұрын

Nice but overpriced

@matthewn2559 Жыл бұрын

If you haven't can you please do a video on the different types of adhesives including using of activators and such. And please give specific brand examples of what to buy. Thanks.

@WideAwakeHuman Жыл бұрын

I’ll save him the trouble - get a thin and thick gel super glue and a can of activator from FastCap - the stuff is freaking amazing and I use it more than I use tape at this point.