Thank you for the new video, I can’t get a enough of them with every new upload I learn something new.

Bill, I would have added the liquid bitumen product. Crommelin 1l is about $16. Now bitumen is also compatible with drinking water surfaces. To make the job longer lasting soak it to a support cloth, polyester, fiberglass, cotton etc. This is specially useful for the first roof surface you fixed. It can be painted if the repair surface is visible. The paintbrush can be cleaned in water Keep em coming

Great Video, Bill! April 2024 prices... Rust-oleum clear is $20 and Crommelin Exterior Grade Waterproofing 4l is $80 at Bunnings. Paintable clear storm silicon is $23.

Great video! Much needed with all this rain!

Used the spray on a split in the flashing, great result and just need to paint it now. Thanks Bill.

On our leaking tin roof I used gaffer tape to cover the rusted problem areas, then painted over with that grey Crommelin waterproofing compound - absolutely fantastic, and has held solid for over a year now.

Hi Bill, Thank you so much for making this video, your a life saver. Love all your video easy to follow no bs approach. Can you please do a video on toilets constantly running water replacing the inlet valve and outlet seal replacement.

Thanks bill for sharing 👍👍

Ty Bill...very helpful and great explanation

keep up the good work mate.

Thanks for that, It was really helpful

Cheers for the guide mate

Thanks very helpful

That’s was great thank you 🙏🏼

Thanks Bill, I need those now with this rain. Hahaha

great vid!!

thanks Bill

Legend mate thank you.

Great full contents

Thanks a bunch the brush on looks better job the spray not sure thanks

Thank you for the tips. I think the Aerosol LeakSeal is the go as it can get in and onto inaccessible places. I have used a product which is similar to a thick bitumen tar. It is most useful as it is can be forced into cracked to get a proper seal. In fact, you can make it run better but heating it with a heat gun. Not pretty as it is black as tar (pun) and is lumpy. But it is out of sight anyway, up in the roof gutters.

I have a gutter placed in the housing of a canopy, with lexan plates, not at the end of it but just before it. The gutter leaks from the brackets that support it (a few drops), especially in the point where there is the slope of the canopy near the hole and the end of the gutter, there is a continuous stream of water.

thanks

Best of luck

Nice

Hey Bill any chance of doing a video how to replace a cracked roof tile? Love your handy tips

No idea products like this existed

Awesome tips! Can you do one around fixing the fall in a gutter? Water pools up in one section of my gutter

Question, do you know which one of the 3 would work best in a place with lower temps during winter. We are talking Minnesota weather so sometimes in the minus. Thank you for the video, very helpful

I use lexel. Works better than any other product

Would be nice if you showed how you applied the silicon or what we call caulk.

Thanks Bill. I know what I'll be doing tomorrow if it's not raining.

Can the waterproof be used on top of the concrete silicone

if water is leaking above the bay window, should I use either of the products? Whic ius best? wouod the item be painter/sprayed from the outyside?

Thanks for the video, what's the largest crack width which you would seal with the spray? Cheers

does spray can last long comparing with other 2?

Hi Bill, I hope you see this😊... you sound like an Aussie 🇦🇺 so I'm just wondering if could please tell me if the 1st one is the same as (same brand) silicon as yours said concrete ? I'm going to Bunnings & there's one for $6 & the concrete is $25... do both do the same thing? Thanks

Wat is best so floplast gutter on joint union to allow exspantion I connected a new to old plastic and fitted a new seal but the gutter is lost a bit of profile

Hi Bill. Where can I purchase the crommelin ?? Not Home Depot nor Lowes.

I have to reseal my box gutter at a warehouse, should I clean the previous silicone off before applying the crommelin or just paint it straight on top 2 coats?

hey man. I have leaking gutters but on all the joins. I have a colourbond roof and right at the back of the join is very hard to get to and clean properly but tried my best and got it pretty clean and dry. I have tried with roof and gutter silicone with longer silicone nozzles to reach right at the back of the join. Siliconed it but still leaks. Improved it but still leaking ( mainly from the rivets) Very annoying. Just drips. Should I try the spray ? Do I need to clean and take off the silicone I put before applying the spray? I have only done it from the inside of the gutter

Thank you so much for the video. Can I ask a stupid question? Will it be better if I use multiple layers of multiple products? For example a layer of silicon and two layers of waterproof membrane plus one layer of maybe tape? 😂 and how about those seal paste? Thank you

We'll take your word for it that it worked then

I thought I'd like the spray but it's just too think and by the time you get a little area done, it's gone. I'd rather use the gallon container and seal it properly

Please where can I get some to buy in ghana

How can I get in New Delhi?

Use fastfix wet shield so much better

Bill anyone told you that you look like Josh Gibson ? Haha

it smells not good. need to wear mask?

Dodgy gutters pty ltd is his buisness name 🤣

If the job isent done with first coat the product is no good because that means you have to go back up the ladder again if your working on a job that's to much time and effort heavy liquid products are much better

Dudewhat is fucking best option

he has a cool speech impediment

You didn't do sh*t but spray some deodorant on a joint. We didn't see if it worked or not. Nor, did we see any other products you displayed. #ClickBait