Thanks for making this video, much appreciated.

Thanks for the insight. Liked the simplistic approach. Working on 08 xjr coupe. Slightly different set up but similar accessibility issues

This has been very helpful, I have this motor in my 03 jag s type R. Changing the throttle body out this weekend & will use this video as my guide. Thanks again. Might use this for the super charger at a later date also 👍👍👍

Great video best iv seen for this job I'm doing my snout bearings at some point and this has been helpfull

Thanks for the video. Way better than alldata.

Ďakujem za video moc si mi pomohol

Thank you! I have check now P0441 and I have to clean or change evap valve.I just don't know how to get to this valve because it's behind the throttle above the transmission basket.RRS 2006 4.2 sc.I was trying do it twice but couldn't:(

you don’t need to remove the water passages at all to remove supercharger, the pulley fits right through the hole with some wiggling

Thanks for the video. I’ve got a nasty squealing sound on acceleration over 2500-3000 rpm on my 2008 4.2 SC 134k mi when in Drive (not as loud or prevalent when shifting manually). Thinking its the snout bearings but still no major idle noise (perhaps a slight knock/tick). I replaced idler and tensioner pulleys and have all new belts. New ac compressor & condenser too. Other than snout bearings, is there much else to consider on the supercharger that could cause this? I dont get the noise when downshifting (no accelerator input) but this would be normal. And when downshifting the engine and tranny sound great. I want this healthy sound all the time! Thanks

men please answer my question whats is in the black box which is on your left side, that box positioned after right headlight, please i can not find answer thanks

Thanks for posting this. I have a 08 SC and this might come in handy some day. What exactly had to be done to the SC? Replace just the pulley or also some bearings? My car runs great and I love driving it. Some minor issues like intermittent wipers don't work and driver's seat back cooling not working. I also get an intermittent CEL: Low catalyst efficiency, left bank. Car runs fine though. Merry Christmas and have a good 2021. PS: you can download the L322 service manual from the net and it is pretty good.

Hey there, this is a great video and I am in the process of gathering all these parts. I have the new coupler kit from eBay but all of these parts you list do not seem to be Land Rover part numbers. Where did these part numbers come from? I've tried google and a couple of them cross reference but several do not. I even went to my local Range Rover dealership and they do not recognize these part numbers. Can you help?

Hey is there any chance you continued and replaced the hoses under the charger while you had it out? I need to replace that on mine and would love to see it if you have pictures or a video of that also. Just a thought on that coolant manifold you struggled to get out. Couldn't you just separate it at the thermostat and move the piece out of the way rather than removing the whole thing? I mean, it's a good thing to replace those o-rings...

My mechanic just did this to my 4.2 sc about 6 hours start to finish he did not touch any part of the cooling system and the sc just slipped straight out. Good guide tho

Do you have a video on how to replace the fuel injectors?

I would like to know how to change the water pump and thermostat on a 2008 land rover range rover Sport supercharge

I have a hose that is ripped from what seems like behind the left side of the engine if your face towards the engine, cant see it, not sure if I have to do all this process just to replace that hose. antifreeze

how long did it take you to do this job? looks painful.

how come your doing this? got any lean code experience with this engine?

I was wondering why my car is completely different from the engine compartment? I've also 4.2 SC -06 Range Rover Sport. I don't have as much space there than you have in this video.

Can you add this Supercharger on a 4.2l regular motor

Nice time with your work but camera not clear on the job

profishinal

Mate, put the camera down….it’s not an action video it’s a tutorial