54" and 64" Kensgrove Ceiling Fan Installation Guide (Discontinued Version)

Рет қаралды 34,229

5 жыл бұрын

How to install and operate the Home Depot 54" and 64" Kensgrove ceiling fans. This model features reversible blades with an energy saving DC motor, and is perfectly suited for large and great rooms. If you would like to skip to a specific section, use the menu below.
1a. Downrod Installation: 2:21
2a. Electrical Connections (Downrod): 4:30
1b. Flushmount Installation: 5:41
2b. Electrical Connections (Flushmount): 7:09
3. Fan Blade Installation: 8:13
4. Light Kit Installation: 9:25
5. Pairing the Remote: 10:33
6. Fan Operation: 14:03

Пікірлер: 38

@dominictrotter7211 5 жыл бұрын

This totally helped me on the installation. Customer service was absolutely no help and unprofessional. This video really kicked it up a notch. Can't thank you enough for the video. Much appreciated!

@aykoro Жыл бұрын

Just what I needed! Thank you.

@DingoLingo-zs1qp 5 жыл бұрын

I'm so glad you uploaded a better quality video to this installation process. Thank you very much!

@Siberoptics 4 жыл бұрын

Thanks! did everything right except I didn't know you had to pair the remote. THANKS AGAIN!

@agentg96 4 жыл бұрын

Thanks for the video, made installing my 54" Kensgrove fan quick and easy!

@Weeklongwind647 3 жыл бұрын

How did you get a white colored light? I got a warm led light.

@grjramos1 2 жыл бұрын

Man!! U save me! Ha ha... My wife and me have 1 hour trying to make it work!!!

@darrenglynn2285 3 жыл бұрын

I just wanted to say thank you! The video explains having multi-fan operation at 11:40 and this was invaluable to me as I had 6 fans but every remote was controlling every other fan. Switching to "1" dipswitch was the trick. Thank a million!

@richardbrewer2542 Жыл бұрын

What about if the fan works fine but the light doesnt work?

@Atotarho74 3 жыл бұрын

Instructions state must use an isolation switch to completely cut power when turned off. I have searched online and am still not clear if a single pole wall switch is adequate or if there is another type of wall switch to meet this requirement.

@MrKnightfire12 10 ай бұрын

What’s the difference between the new and discontinued version. I’m looking to pick up a white one tomorrow what model is the older and which one is newer?

@katrinafouts6893 3 жыл бұрын

Followed instructions and everything works but the light. I get no response from remote or anything. Fan part working well. Any suggestions?

@gqdabien 3 жыл бұрын

I installed this fan, and it turns on fine. However if the fan is on and I turn on the LED light with remote, the fan will just shutdown. I can turn on the light by itself if fan is off. What could be wrong?

@thatman091 3 жыл бұрын

The fan blades doesn’t work anymore. And it’s making a high pitch noise

@brentburns2547 4 жыл бұрын

Does the fan have to be fully assembled (I.e. blades, etc.) for the remote to pair or can you “test” the motor before fully installing?

@jcalbadan8742 2 жыл бұрын

My remote doesn’t turn on the light how can I fix that?

@jinpark75 4 жыл бұрын

is the light bright enough to lit a large family room?

@billman6364 3 жыл бұрын

yes its a great lite

@shant8705 4 жыл бұрын

Fan is installed, works well with remote but...it turns off after 8-10 minutes. Any idea what that may be?

@TALCeilingFans 4 жыл бұрын

You may be experiencing interference from another fan or device nearby. You can try setting the fan to paired operation mode (if you have the remote with the 1/0 dipswitch) as shown here: kzfaq.info/get/bejne/mMqjqZWInpOrZY0.html If re-pairing the remote doesn't help, contact customer service for assistance: www.tal-usa.com/technical-support

@shant8705 4 жыл бұрын

Thanks, I messed around with the remote the day after I posted the question and it’s working fine now. Thanks for the response.

@mortie2 5 жыл бұрын

Ive tried everything and my fan doesn't work

@randydom 4 жыл бұрын

4EightyEast same to me, just light is working 🥵

@brentburns2547 4 жыл бұрын

Randy B Did you get this addressed? If so, how? We have the same problem.

@iandv2269 Жыл бұрын

I have the same problem here,tried replaced the receiver and still don’t work only light is working

@7700778737 4 жыл бұрын

I want to use a wall switch for the light but there is no blue wire for the light. Have a red wire coming out of the ceiling for the light to a switch on the wall. Do I just cap the red wire?

@websafetymlm 4 жыл бұрын

I have the same issue and having an issue getting things to work

@chelsyescobedo3345 4 жыл бұрын

Did you guys ever fix the problem ?

@7700778737 4 жыл бұрын

@@websafetymlm

@7700778737 4 жыл бұрын

@@chelsyescobedo3345

@kelhuck2482 4 жыл бұрын

Same problem here. Online conversations seem to say to connect the red from ceiling to the black in fan and then cap off the black in the ceiling (which creates a dummy wall switch). But lights won't work properly now- I can turn them on and off one time with the remote and that's it, until I flip the wall switch and "clear" the fan. Not sure if the wiring we did is incorrect or the remote is messed up. Currently having email discussions with customer service to try to figure this out.

@nicolegutierrez6150 3 жыл бұрын

My light doesn't want to dim....don't know if I'm suppose to do something special to make it dim??? It just stays on bright.

@mrs3boys 3 жыл бұрын

I had the same problem. What I did was cut the power breaker in my electrical panel for 10 seconds. Reinstall the remote control batteries and aimed the controller at the unit and hit the pairing button for 5 seconds. The light blinked twice and everything works now. fyi

@jcalbadan8742 2 жыл бұрын

@@mrs3boys didn’t work