Thanks for the video, this is a lot more straight forward than I thought it would be
@jcmexfreestyleКүн бұрын
Thanks man i did not want to do a cover,i will now replace mine from ajunkyard.
@m.weston71142 ай бұрын
Use a dash cover. A guy that collects vintage trucks, told me to use a use a cloth soaked with transmission fluid and put onto the entire dash plastic twice a year. it does not need to be dripping wet, but apply it so it has a sheen to the dash. He had cars from the 50's that the plastic dash looked new because he did this to them. I do this twice a year, but wash down the dash first with soap and water, when it dries, then do this application.
@Zacpactv2 ай бұрын
I may try that! Transmission fluid is very absorbent.
@davidwickboldt712 Жыл бұрын
Love it dude. Lot easier than I expected .
@Zacpactv Жыл бұрын
Thanks!
@Obs76 Жыл бұрын
Agreed. I was dreading it, until I watched the video.
@morgandavis11745 ай бұрын
Worked perfect you’re the man!
@Zacpactv5 ай бұрын
good to hear man! Thanks for the feedback.
@UrbanExplorersX2 ай бұрын
My vents up there are in perfect condition and I own a 02
@Zacpactv2 ай бұрын
you are very lucky. They crack were the air flows mostly.
@Uae_soul Жыл бұрын
Big thank bro i will work on it soon
@Guadalupegonzale1004 ай бұрын
Thank you man I appreciate it your help
@Zacpactv4 ай бұрын
glad it helped, thanks for feedback
@joshuamann217110 күн бұрын
I pulled those push releas pins out. I'm here trying to figure out how to take that off.
@Zacpactv10 күн бұрын
@@joshuamann2171 pull the vents out to access pins.
@joshuamann217110 күн бұрын
@Zacpactv those are the pins I removed, thinking they were locking the handle in place. I found one and had to switch it back and forth while I worked the handle out, one side at a time.
@ChecoSaucedo-tt2di4 ай бұрын
Thanks
@koi8440 Жыл бұрын
a factory new dash cost me about $100+ tried going to junk yards but all these Chevy's are either all salvaged or broken from crash or by sun weather aging also great video either way not much Chevy restoring vids out there.
@Zacpactv Жыл бұрын
Thanks man you are absolutely right about cracked dashes in used chevys. I pulled mine from an avalanche to be exact almost forgot ha! Send the link for the 100.00+ oem dash. Chevys owners need to know!!
@oneeightyd0wn11 ай бұрын
Did you order the factory dash from a dealer?
@Zacpactv11 ай бұрын
@@oneeightyd0wn mine was a junk yard find bit in curious on where @koi8440 got theirs.
@rafaelbaez81346 ай бұрын
Where’d you find a new factory dash
@ruthschroeder6915 Жыл бұрын
Ty
@Zacpactv Жыл бұрын
welcome!
@westlee9334 Жыл бұрын
You skipping the part about removing the bezel tells me you broke it. Or you spent too much time trying to remove it without breaking it. An important tip about removing the bezel would 5:27 be to put E brake on, turn key as far as you can without starting and put the vehicle in Overdrive 3(or as far down the shifter will go) makes it so much easier to remove. I have seen alot of broken bezels and seems to be the most common to brake when removing the dash
@Zacpactv Жыл бұрын
No breakage the camera wasn’t recording 😢. Good point on playing with the shifter!
@naomidelavega204911 ай бұрын
Ac replacing actuator on a 02 Chevy 2500
@AdrianAichLF Жыл бұрын
25 bucks wow!
@Zacpactv Жыл бұрын
It was a steal!
@areyouswerious10 ай бұрын
Did you skip the "Oh shit!" Bar? I don't see the explanation of how to remove that handlebar from the passenger side dash. Did I somehow miss it?
@Zacpactv10 ай бұрын
its on there just didn’t have two hands while holding the camera. I show the plastic piece the gets pressed to release.
@user-cc3gm9cp8h5 ай бұрын
Why is mine stuck like above the air bag
@Zacpactv5 ай бұрын
did you get the grab bar off?
@user-cc3gm9cp8h5 ай бұрын
@@Zacpactvit had 3 clips holding it on thx
@YouAreSoAnnoying10 ай бұрын
This helps a lot cuz I just got a crack in my dash cover next to the right pillar, It’s not an urgent replace imo but I do like to have this at hand