If you would write a book, "Anytone For Dummies," I would buy it. Great video.

Chris. Always learn something from your videos. Thank You Sir

Awesome! Thanks for the tips. I will definitely be using this feature on my new AT-878UV plus.

Thanks for this video! I've had my AT878 about a month now and your video helped me out! 73 my friend.

Wow! This is great. Got to try this one. Great video... keep ’em coming.

Watching now! Looking like another great vid. 73

Very nice video! Probably could be a lot shorter in length. This functionality is something that is not well documented (or documented at all) so I’m very happy you decided to create this video! Keep up the good work!

Fantastic! Was in two minds about getting this radio as wanted this kind of function so much on my old TYT MD380. Dig Mon works a treat on my new Anytone 878 and can now hear LOTS of digital traffic! A very cheap way to get a DMR scanner (all be it a little slow on the scanning)

Thank you so much for your explanations great job.

Thanks for the video. L:earned from it. Just wanted to add that you can listen to a frequency you found using Digital Monitoring and saved by simply noting the Color Code and time slot and adding them to the saved frequency channel that was saved. But I just leave Digital Monitoring on most of the time. Thanks again.

Just a little comment to help us dummies to follow. Unless I missed it, it would help to state the purpose of the procedure prior to executing. It may just be me, but I was having trouble comprehending what you were doing until you stated the purpose at the end. Thanks for taking the time to make the video to help the uneducated, like me, out.

Thanks Chris, very useful and informative video

Thank you Chris I realize this is an old video but I learned something today N9IWJ

This also works the Alinco DJ-MD5X to!

IN CANADA WE call # pound and * astrisk.

Thanks my brother

Resontly picked up anytone hand held and am always looking for as much information as possible.

Watching your video now and I had TAC-310 on in the background and low and behold your on TAC-310..

It’d be nice if it resolved the name of the TG in digimon mode.

So Good

Do you have a video about doing something similar with turning all DMR filters off on OpenGD77 (rt3s)? I have hesitation about if I shall enable C scan On or Off. So far I’ve never heard any DMR despite tuning onto several repeaters (southwest of france here) and/or scanning with setting start and stop frequencies.. Thanks!

That’s awesome. I have a new 878. When I change from ch to ch on my hot spot the TAlk groups are sometimes one channel off and I see the last channel when I transmit. Any idea what is going on. KS4QF.

É muito bom saber que tem encina a gente coisas novas tecnologias parabéns

So if I understand I key up with my hotspot for 310 and yet I can have my radio sitting on say 91, but will hear 310 when there is traffic. But, will I also hear traffic from Tac 91 also? I thought the only way you can hear a tac channel is to key on it and make it active. KB3Z

you’re channel is so helpful. i’m new to ham radios and after watching you i’m going to get the anytone . is a technician license good enough for me. also my bafong is able too scan for police and can the anytone also pick up police? thanks 🙏

Yes just discovered digi mon myself...useful

NOt sure what I am doing..but I tried that and I dont get the monintoring after selecting everything and going back to main screen, dont see anything other than what was there last

Can it do store and forward?

Any chance you can make a quick video explaining how to make a codeplug about using two D878 radios using digital, simplex, for better rang & voice quality. without the use of a hotspot or repeater. Thanks

Thanks!

How did you get that red border around the screen. Does it only do it on the earlier versions? Mine is the black screen version and it doesn't do that

Very cool. Is there a way to get on the same talk group? The star key possibly?

Chris. What is the red Speaker icon indicating. I can't find any reference to it in the manual and my icon goes on and off at times?

I was frustrated trying to get this mode to work. Turns out that my radio and software defaulted to commercial mode. I had to switch the radio to amateur mode to get digital monitor option to appear.

What is the A next to the color code? I wish it was A for APRS to let me know it's on!

A quick question I have my 868 connected to an external arial, will that damage the receiver? Been hearing about "to much signal"

Can Digital be used from handheld to handheld on D878 without a repeater or anything else?

Hi Chris, I can get the analogue channels on the radio you sent me but have to wait till my hotspot arrives to get on the digi

Hi Chris. Does promiscuous mode on the Ailunce HD1 work the same way?

Chris I had a short problem and wondered if you ever came across it before? I have a 868uv and i like it, i have been setting it up for DMR but i am having a prob.I have added a Jumbo hotspot for the house got it going ok, I added more repeaters (dmr) and everything was good, but now I go to get on dmr and when I hit the PTT button it keeps telling me access denied on every channel. I was hearing on monitor 1 & 2 but having probs with that, Any ideas Thanks Wes KG5WNV, Tulsa Okla

So just to be sure before I buy, I can use this as a scanner with digital mon on, and not have to program anything or have the internet so i can just hear local traffic, is that correct?

Can you assign a frequency range that will be searched in VFO mode?

So I have added some digital channels that are in my local area, no hotspot, using the vfo to search and then save with #, but when I go to transmit it says tx freq error, any ideas on what I'm doing wrong ? I can hear them perfectly

What is the red A next to the code plug number on the top right?

Would you know if Digital Monitor ON can be programed into a button for quick access?

Nice and calm video. 2 questions: 1. How do I make it so that, let's say, VFO A is the only one I can get a signal from. This is an example... I have VFO A and B. Selected A. Signal still comes in on B. To disable this frustrating thing, I have to activate sub channel hide. There's gotta be another way.... 2. How do you get signals in the UK, all the way from the US...?? My radio: 878+

I must be missing something. I have the Btech 6x2, which is the same as the 878. It has the Digital monitor function and it works on the local repeater. But when using it on my hotspot (Jumbospot), it only lets me hear one Talkgroup. And that is the one I have activated at the time. I can dial in other talkroups and it does hear the TG that I have activated, but I can't hear any of the others. You can't activate more than one TG can you? Can someone lease help me understand.

So do you have to have a Hotspot to do this, or could you still receive local traffic without a hotspot?

What does the A stand for on top right of screen?

Do you know how to do this on Alinco model?

Hello, can i program my 868 with a baofeng cable ;

Could i get some help here please. When i go to digital monitor it works but then it type of loses the station im confused as on my scanner i can still hear it?

one problem that I see......if storing a repeater that you have searched......you must know the off-set freq.

Murat Turan inventor 1 second ago 73 to everyone. I would appreciate it if the friends who could untie the device help. I threw a program to the device, after a while, I loaded the new updated pages, then I realized that the sound does not show the logo when turning on, but there is no indication of how much it hurts and shuts down. How can I bring it back? When I uploaded my file to another friend's device, the same problem happened with him. When I formatted it, it was okay, thank you already.

I am blind, and want to know if I need to see the screen to do all of this? Does the radio have enough embedded speech?

Digi Mon is not showing up in the menu on my 878UV. Is there something I have to enable in the CP?

Can it monitor trunk radio in 800mhz?

I'm new to DMR & wondered if you can see and modify the need for digimonitor in the code plug.

Is this radio P25 capable?

Moni reply Set Success

I would keep slot hold off.

Don’t talk so close to the mic, and turn it at 30-45 degree angle Otherwise you will ovemodulate and the other person can hear breath sounds.

Dude....snoring!!!Hurry up and explains this faster