Assembly video for Ortur Laser Master 2 S2
Рет қаралды 31,313
2 жыл бұрынOrtur Laser Master 2 S2:
munal: ortur.tech/olm2s2
www.aliexpress.com/item/40013...
Ortur Laser Master 2 Pro's Link : www.aliexpress.com/item/10050...
OLM2/ S2/PROS2 + Ortur YRR 2.0: www.aliexpress.com/item/40013...
3 versions in 1 listing: www.aliexpress.com/item/40010...
Links for downloading manual of OLM2
/ 1176501696096596
@mstashadc 2 жыл бұрын
It would be nice to specify the screw size and which direction the outside bars are to be assembled in.
@MukhlisShafi 2 жыл бұрын
Hi, I need some help, i have just purchased laser master 2s2, and set it up, the only trouble is the X-axis is not moving, I have checked the cables and when i home the y-axis moves but the x-axis does not, plus the laser GRBL shows an icon that says 'Alarm' can you help?
@jabbarhajiyev3052 2 жыл бұрын
what should be the height of the laser ? how many centimeters
@mzroz410 Жыл бұрын
Video made everything super easy. However; have stripped the grounding screw on the laser can I ground to another screw on the laser?????!
@ORTUROFFICIAL Жыл бұрын
Hi Roz, yes, you can.
@alexmartinezzamudio 4 ай бұрын
which height should i set the LU2-2 module to?, i want to cut a 2mm thick plywood
@Nocthurnos 2 ай бұрын
1:09 I finished assembling mine, when I turned on the power the laser stays on
@maryr2734 9 ай бұрын
:49 my bar will not fit in the railings like yours in this video. This company gave me no help like a manual to walk me through how to put it together or how to work it if I got it put together
@Sam1970Sam Жыл бұрын
Hello , thanks for the video , !!!I have a question for you. I bought a laser machine .. Artur Laser Master 2 PRO S2 .. I connected everything as in the instructions, downloaded the driver program.. But when you turn on the machine, the light bulbs start blinking periodically ( red blue) the head does not walk.. What could it be???
@ORTUROFFICIAL Жыл бұрын
Hi Samvel, please check if the emergency stop button is pressed, please screw it to pop up.
@Sam1970Sam Жыл бұрын
@@ORTUROFFICIAL Thanks everything worked fine
@mikekelly2309 Жыл бұрын
Followed instructions after hitting power the laser comes to front left corner but hit the front bracket making a noise?
@chrisgaither7680 Жыл бұрын
I am currently having the exact same problem
@RichardHess-yz9ff Жыл бұрын
@@chrisgaither7680 It's the laser safety shield hitting the rail before it can trip the limit switch. If you remove the shield it should work. waiting to hear back from tech support. My guess is to move the limit switch back a bit. Did you resolve the issue?
@chrisgaither7680 Жыл бұрын
@Richard Hess I have not yet but I will try what you said. It would be easier if there were actual instructions on how it's all put together. Thank you for the help
@ladyt2588 6 ай бұрын
No timing belt in my box 😮
@fastlanetechnologies2512 7 ай бұрын
Mine did not come with the rubber track. This is bs
@jabbarhajiyev3052 2 жыл бұрын
I connected the device to the computer, but the computer does not see it, what should I do?
@ORTUROFFICIAL 2 жыл бұрын
did you install driver?
@jabbarhajiyev3052 2 жыл бұрын
@@ORTUROFFICIAL I downloaded the driver to my computer, it still doesn't open
@mrt6031 Жыл бұрын
@@ORTUROFFICIAL you guys suck! No help what so ever. Figured it out and it’s different from this video. Y’all suck as a business and show be sued for selling a product we have to put together with different pieces in every tutorial of the s2
@jamurquhart 2 жыл бұрын
Good video! For anyone putting this together, use the instructions on their website and this video as a supplement. Go back and forth between and it’s super easy.
@jessetutterrow4320 2 жыл бұрын
Poor video! You skipped many steps! Why did you not produce a detailed video showing each step? Also, thanks for not including the english instructions, poor as they are, in the box. I had to go to tech support to get someone to send them to me which turned out to be a waste of time since they are not detailed enough to be of any help.
@ORTUROFFICIAL 2 жыл бұрын
sorry, may i know more which step is not clear? we will revise. And please download instruction, manual, and software through the code in box, thanks
@daniellemullis4402 Жыл бұрын
This video does not do a good job of showing how the edge pieces are supposed to go on I've had to un do it multiple times now...
@kennywelch4179 4 ай бұрын
Slow it down for the love of god
Chris Powell
Рет қаралды 109 М.
The Edge of Tech
Рет қаралды 66 М.
CarpenTAK_DIY Woodworking
Рет қаралды 378 М.
Casual DIY
Рет қаралды 22 М.