If you like this Headlamp Upgrade You might want to check out this SwitchBack LED bulb Video also kzfaq.info/get/bejne/nr-mp5qSms6-o5s.html Thanks Again!

just got mine for dodge. you made it so simple and easy. other vids i’ve watched make all things so confusing, running cables all around and take unnecessary steps. i bought the strips, the clips and will get to it on my day off. thanks for the great vid man

Great video man! I feel like people that take the time to make easy to follow tutorials like this are very giving and just awesome people! Thank you.

"this is a 2014 it's kinda older" me with my 1996 honda civic: (〃ー〃)

Put em in the hood grill and go all night rider 😂

I have been searching for at least a few months on a video that ACTUALLY showed it step by step on how to install and some tips on figuring things out if you were confused. 10/10 tutorial.

I was skeptical at first. But I have to agree with you when you say they look cool. The gap that is lit up between the hood and fender sort of splits off and looks very nice. A nice custom look for very little money.

You go extra steps to explain how to do it. Great job bro, first time watching your video and I love it

How's the DRL led strip? Is it still working?

Great job you did there man. Simple but beautiful. Your 2014 truck now looks like 4 years newer. Thank you for this great idea.

So I'm an old school add ons kinda guy for every vehicle I've ever owned. I didnt even think about little L.E.D. lights being used for blinkers. This is an awesome and easy upgrade for any level person wanting a way cooler looking head light! I am buying these for my 2018 Silverado pickup! Thanks for the post brah brah!

Awesome!! Now I would like to see this with black headlamps....that would be sweet 🤙💯

A year later and this video is still helping. Thanks man! Gonna do this to my galant soon. Take care!

Could he not ground it with a t tap to the ground on the light? Great video and very detailed!!

This was very informative, I learnt how to tap into a wire 😬

Your smile is infectious 😆 I was smiling watching this because of your excitement. Good job bruh!

Thanks for the detailed video! First thing I did was pull up KZfaq after I bought them. eBay had them for $9.88 I went a little backyard electrician and just put the wires in the wedge and then stuck the bulb in. My 2012 Nissan Juke looks crazy mad at night.

Mine come in tomorrow can’t wait to try them on my 2010 Mazda 3 👌🏻

Nice mod, will do it to my truck. Thanks for sharing.

I used every single inch of led strip on my Acura tsx 08 looks amazing

Tks for the detailed instructions and the rig looks great with the new LEDs.

I removed the headight and put it in the oven for 15 minutes then completely separate the plastic glass and put the strip lightening inside the headlight itself. But yours is not bad at all though!

Thank you for very detailed tutorial with explanation 🙂

I have the same 3 wire light wire on my truck will just follow what you did with the outside two wires. Got the parts but given cold and rainy weather and soon snow will wait for better weather to install. You rock man

Finished product looks good, dude!

3m also makes a shrink tape that bnds to itsef id just put that around the connections. Good vid! Putting some on my ford

U are the best of them all.

Get yourself some 3M automotive adhesion promoter, apply to the surface where you will be putting the double-sided tape, and it will never come off.

just got minhe mail, and spent the last 2 hours hooking them up, they look bad arse on my van.. cheers. ;-)

The best one who did the full tutorial big up men you are the best

Good Video but not always comfortable wiring but might try. Don't like DRL on my '19 Rogue and this will give me the switchback look I want with a curve. Replacement head unit on Amazon was close to $600 bucks, for $20 bucks this is perfect. Thanks for your video and another upgrade to my Rogue.

I have the same year truck. Crazy how this popped up on my feed. May have to do this.

Clean look! Super simple. Thanks for the info.

The dad I never thought I needed , thanks man very informative 🙏🏽

Your video really help with the wire tapping part. Thank you so much! All the other one just showcase the lights, before and after, not the full process. So you don't really need to get into the fuse box at all?

thank you for this tip very helpful. First time I've heard about t taps. I can't wait to install the led lights on my Rav 4 2015.

Great job !! Too bad that was to sunny inside of your garage !!!!😁😁😁😁👍

I hooked onto the headlight power wire and turn signal. They're not on during the day but they look good at night. If you do hook to the daytime running lights then at night they wont be on. Mine have been working perfect for 3 years now, different brand. Been thinking about doing a red/Amber strip below my tailgate. And T-taps Suck!

Just a little tip mate those plastic connectors usually have issues down the track your better off twisting soldering and taping connections IV had problems with them before they corrode and don't make a proper connection :)

Its WHAT Toyota should have done

Thanks for the info! How come you didn’t t-tap into the black and white middle wire as a negative instead? Just wondering

I have some of these, and I plan to run the red wire to my accessory fuse so that the DRL will be on anytime the key is on.

Wow that’s pretty cool. Ordering me some for the bronco!

not bad man, better than having to tear the grill and rest of the stuff off. will check it out on my 2017 Tundra, Lights on the way should be a easy install as I am used to working on Harleys

Awesome vid, I just bought these led strips. Looks great on the truck.

Great video. Exactly what I was hoping to do with my truck. Thanks!

Heated my headlight took it apart and just added the strip inside, the sticky part actually the side lights face and brighter tho

Just bought some for my Impala! Good video man!

I have a 14 tundra, I installed the led strips the same way you did. 1 major problem, when I start the truck the lights turn on amber and both flash at the same time. When the truck isnt running everything works fine. Any ideas???

Hey friend. How did they work for you? Do they last a good time working fine?

So. You have to put your parking lights on in order for the DRL to work? I want the DRL to turn on when the car is started. How do you do that?

It must easy, a one armed man can do it.

I have a 2014 tundra as well I connected everything the way it should however, my daytime running lights and my turn signal are both the same wire so I get amber running lights and turn signal, the only way I get the white LED light is if I turn on the headlights, but the amber turn signals still work so not sure what to do here, do I leave it like that or connect both LED wires to the one wire but I think if I do that I'll get both white and amber running lights and turn signal?? Any ideas????

I install this my self, (only running white lights, only connected the black and red, left out the yellow) but after a while I heard this heat up and start doing yellow lights. Hope I make any sense. I turn off the lights and turn back to white. I drive for 30 minutes and starts again. The yellow start blinking

Does the DRL have to have power for the turn signals to work or do the turn signals work independently when power OS applied?

Can I put the ground from the lights to the ground wire on the parking ground wire Or the ground wife has to be to the battery?

I'm new to this kind of stuff. Does it continue to drain or consume lot of battery?

Definitely gonna be the next mod for my Police Package Charger. I'm hoping to find these LED strips in all Amber.

Damn looks legit and effortless and looks like it came like that.

How come people don’t Show it in broad daylight Sure it looks great in a garage. But it’s have been nice to see what it looks like in direct daylight

How would you do a 2006 Toyota tundra limited

It's been about 3 years on this video, how are they holding up?

Did this on my 2014 Tundra and for some reason when brake is released, it stays yellow. The DRL stays yellow and doesn’t turn to white until I park, turn off the car turn back on and switch the parking lights. If I were to release the break it goes back to yellow. Thought it was wrong wiring but a flipped it and the turn signals didn’t work so not sure if you see the same.

Actually installed these on my 2015 Chrysler 200.. They look very cool for sure. But unfortunately mine had a couple of the LEDs burn out on both sides in the middle of the strips. Happened within 2-3 months. Haven’t had access to my car in months because I joined the military, so not sure how they’ve held up since then.. Hopefully you don’t have that problem with yours!

GET A TRIPOD MAN !!! JEEEEEZZZ

That was sick bro I have the same yr and truck and Ima be doing that too. That looks awesomenss.

Man... haters are always hatin’... 🤦🏻‍♂️ 😂 My 2017 Silverado 2500hd is probably gonna get this mod because it beats buying $500 aftermarket plug-n-play switchback headlight housing units from Anzo et al. Stay strong, LateModelTech! 😎👍🏽👍🏽

Mines coming next week I’m out them on my 2017 Nissan alitima

Now the head lights should be one even in day so u can switch on the led lights?!

Good vid! Any follow up? Thanks

I just found your Chanel. N i already Suscribe!!

Is it auto if didnt turn on 1st light ? Likes luxury cars detect dark and auto on.. Or need manually turn on light ?

Could I technically use this kit to put inside the headlight ?

Love to see how they are installed on Nissan Altima…(interesting)

Can you put up the link for the one’s that connect to the headlight’s themselves, please? Looking for multicoloured as well. The truck ended up looking sick af.

Thanks man. Great video, everything explained as it should be, and no bullshitting. 😀👍😀

Hey if I have a led lights on my new headlight assembly can I wire the switch back led to show amber versus white?

I know I'm a bit late to this vid...but could you show us how to attach the turn signal wires? I've never done that and can't seem to find a video on it

If I had daytime running lights which bulb what I need to tap into

do i need to extend my wires yellow red...

My parking lights are also the blinkers. What do I do.

Looks great thanks 4 the tip on the t taps just ordered a box from Amazon ...have a ? How bright is it outside like n the middle of the day thanks again

Wow!great and precise info!God bless.thank u

Very good video bud...thank you! Going to be doing this to my 2015!

Can you give review now, almost after 6-7 months. Did the outer part turned yellow or brown due to continuous exposure to sunlight , water , dust etc ?

Great video! How these holding up ?

I would have hooked the DRL up to a spot with power when the engine is running

Does it mess with anything electronic wise?

Amazing mate, this will be really doable for me... not willing to take off the headlights and the transparent cap, which is a pain in the arse! hehehehe BUUUUUUUTTTTT. I have this BMW X3 e83 2006 and it has no day light option... so... how can I connect it to have these options as you? Day light with 6000K temperature and blinkers with yellow lights? Any suggestion?

Yellow wire from the DRL controller should connected to the front turn indicator and it will work?

did you have any issue where the DRL(white) just randomly lights up while using turn signals but it doesnt when i put it on hazzard mine does that and idk what the problem is

Why aren't you using the matching red quick disconnect spade terminal & using red T-tap with blue spade terminal?

So what would I do to stop my high beam from coming on as a DRL if I install these?

im in my fuse box how do i run wires ? 2013 tundra

Can I ask why u used t taps instead of tapping to the back of the connector (like you mentioned)? Seems like it might be easier? Any issues to that method that made you go with t taps? Thanks for vid!

How did it fare against car washes and rain?

Thank for sharing. Great video and explanation

I have that ones on a vw passat b5.5. And it looks amazing

Great video .GO ‘STROS!!!

are they bright out of the garage