Beast Tile Saw Unboxing Test & Review

Рет қаралды 68,485

5 жыл бұрын

BEAST Tile Saw - KING of Hand Held Tile Saws!
Direct link to this Beast tile/stone saw:
amzn.to/2LhPTao
Tools we use:
www.amazon.com/shop/landbergt...
Click below for my other videos!
World's First Cordless Tile Saw! by PORTER-CABLE
• Porter Cable Cordless ...
Best Tile Saw for the Money? Dewalt D24000 Review
• Dewalt D24000 Tile Saw...
Best Tile Cutter on the Planet? Montolit P3 Review
• Best Tile Cutter for A...
Big thank you to soundcloud! Music Info Below!
David Cutter: Brass Stopper
Click to Subscribe!
/ @landbergtiletv
Thanks for watching! #tile #howtotile #installingtile

Пікірлер: 66

@hangao9673 Жыл бұрын

*Works well for a DIY home improvement job **MyBest.Tools** A little sloppy in the cut. Water reservoir is too small. Cut one 20" tile - time to refill.*

@israelvasquez1452 4 ай бұрын

I bet you can adapt a 1 gallon jug for water, little heavy but be happy, happy, happy.

@maydanlex 3 жыл бұрын

Great production value on these videos. Appreciate the effort.

@LandbergTileTV 3 жыл бұрын

Much appreciated!

@rogergreen1787 5 жыл бұрын

Like your reviews very helpful viewing your rigid table saws 😀

@LandbergTileTV 5 жыл бұрын

thanks!

@Tako2e 5 жыл бұрын

That thing packs a punch !!! Super powerful but be ready to put on your surf shorts 😂😂😂... GREAT REVIEW AS ALWAYS BRADDAH ALOHA🤙🏾🤙🏾🤙🏾

@LandbergTileTV 5 жыл бұрын

Haaha, yes you're right! Put those board shorts on if you want to use this little beast! Thanks for watching! 👊👊👊

@Ivan-nq9xj 2 жыл бұрын

Thank you for your video, friend!

@choonwahyee9101 5 жыл бұрын

The saw 's are Super build for professional 's ! Wons and scored points!( numbers one !

@more4less24seven4 5 жыл бұрын

Does it cut granite at a perfect 90°? I used the Ryobi and it doesn't cut straight down. As a result; I can't use the Ryobi for joining granite corners at 45°. There ends up being a slight gap on the inside corner.

@republicansthatdidntvotefo1605 5 жыл бұрын

That's a ball valve for the water supply I'm pretty sure you can throttle that water flow down or customize the flow by simply turning the valve handle 1/8 or 1/4 etc, etc, until it reaches fully open which would give you maximum water at full open. Thank you great video keep up the good work..

@LandbergTileTV 5 жыл бұрын

Yup! You can control the spray if you like.

@BigDogRidgeback Жыл бұрын

At 10:14 that is what i bought lifeproof 6x24 shadow wood tile. Only thing is my target wet saws motor is shot! I can't find that Hand held Beast anywhere?

@terrylewis5786 2 жыл бұрын

What size arbor and can the valve throttle the water flow?

@crosstheline.1969 5 жыл бұрын

I will definitely buy the beast !!

@LandbergTileTV 5 жыл бұрын

It's a great handheld saw! 👊

@christinafernandez458 2 жыл бұрын

Wear do you buy I can't find this saw any were on the net ??

@eddieburk9153 3 жыл бұрын

You could reduce the water pressure I turn in the valve down

@spectacularmisslautn 10 ай бұрын

Where can I purchase this tool?

@choonwahyee9101 5 жыл бұрын

This saw's are so ...... Solid's! I like to buys

@MistAtsiM 2 жыл бұрын

Yes awkward! The saw is great but ergonomics especially for a left handed person like myself... Man. It's a bit of a challenge. Trick I've tried and it works for me is an upcut. Works very well. I pull instead of push.

@jeosua 5 жыл бұрын

I've been eyeing this saw for quite some time. I have a couple Makita handhelds but the water feature is more convenient. It's either the beast or alpha. Alpha is a lot better in my opinion.

@LandbergTileTV 5 жыл бұрын

never tried the Alpha, but this is a beast! 👊

@askthisoldtileman5401 5 жыл бұрын

It looks like a good saw. I would cut back the amount of water. Great demo as always.

@LandbergTileTV 5 жыл бұрын

happy you liked the demo! thank god for the valve, otherwise it blows water around like crazy!

@richreetz 3 жыл бұрын

Take this video down. This item is discontinued.

@StarrTile 5 жыл бұрын

Nobody can ever get you anything for Christmas😂 I actually have a handheld Makita, I use it extremely rarely, if I have to cut a curb top or something then I will hook it up, but it's too much of a pain in the ass to find a water source to do all your cutting outside, I just don't have an application for it, a little bit like the dry saw can't find an application for that either.

@LandbergTileTV 5 жыл бұрын

I totally agree! Water source for this is rare when tiling a shower, probably best for countertops, but damn it's a Beast! 👊

@LandbergTileTV 5 жыл бұрын

And yes, nobody can buy me anything for Xmas lol, all I ask for are socks and t-shirts! 😁

@rockycon1967 5 жыл бұрын

As a tile contractor Id only use this to trim a vanity top... I thought about getting one of these but in all reality not much good for your typical inside tile jobs.

@robgp6987 5 жыл бұрын

Used it on a 36x36 tile job instead of buying a bigger wet saw .worked just fine for the 2600.sqf project

@wavestherules558 5 жыл бұрын

I do my cutting in the room i'm working on. This Beast would drown the place . I'll stick with my 12v hand held Makita for bathrooms and kitchens. What makes people choose 900x150 wood effect floor tile ? Still no prob for a Maka.

@epenaloza52 4 жыл бұрын

Can I get the serial number of your makita or the name I'm used to cutting my granite with a grinder and a diy guide for dose straight cuts

@wavestherules558 4 жыл бұрын

@@epenaloza52 It's the CC301DZ but you will need a fence (guide)for a long strait cut . and a couple of runs through a hard tile.

@mattmason7554 2 жыл бұрын

Looks like a pain in the ass. Easier to pack a compact table saw. That said, great video. Oldie but goodie😄

@robert_7258 Жыл бұрын

Do you have to open the valve all the way. Or it opens gradually. You really don’t need that mush water

@LandbergTileTV Жыл бұрын

Turn it gradually

@gustavoguzman4198 5 жыл бұрын

Hi. What disc o blade? You have on.

@LandbergTileTV 5 жыл бұрын

The blade that the beast saw came with. It's an amazing blade!

@joselverdoso1954 9 ай бұрын

Tira mucha agua

@choonwahyee9101 5 жыл бұрын

Best ! Super's

@johnB-fj8eq 3 жыл бұрын

Please use ear protection when using ! Does a tremendous amout of damage to your hearing over time. Not to mention how irritating it is to listen to it!

@thomasslover2340 4 жыл бұрын

First, bad camera work. Maybe an assistant can solve this. Second, chips at the end are a major concern for us amateur tile installers. A $300 saw won't solve that, it's about technique. How about some advise on that. We don't need to see how to chip tiles, we can do that ourselves!

@jamessprow7116 5 жыл бұрын

Can't you just turn down the water consumption feature

@LandbergTileTV 5 жыл бұрын

Yes you can with the valve, but more water on that blade the better 👊

@HieuTran-rm9md 5 жыл бұрын

The way they design this saw is almost the same as $99 Ryobi saw. If you want to cut something straight like 5’x5’ or 5’x3’ with 1/2 thickness quartz for bathtub wall with a aluminum straight edge as a guide, you just can’t, bc the base of this saw is not thick and wide enough that could rub again the straight edge and slide when cutting. The only way could make it works is, add a piece of aluminum or plastic to bottom of the saw base, make it thick enough and wide enough, like the way they design a 7-1/4 circular skil saw, then it could do the job.

@LandbergTileTV 5 жыл бұрын

Yes sir, that is true 👊

@wtfek1 4 жыл бұрын

Hi Hieu, what's a easy way to cut a 36inch long side miter cut?

@davidjanuszewski5020 5 жыл бұрын

I like it, I would put a wood cutting blade on it for my cabinet work.

@martylucas8557 5 жыл бұрын

David Januszewski...need to thin the gene pool out some more I see.

@426superbee4 3 жыл бұрын

Water is a dust control and keeps the blade cool ~ The bad thing is it hide your line and can't see where your cutting Not worth no 170 dollars more like 45 dollars

@ceogeo6106 4 жыл бұрын

I bought one used it for a couple of cut it’s heavy, awkward makes a ton of water mess ! can’t see the blade and where are you cutting ! Big waste of money does anyone want to buy it it’s basically new ! 50 bucks and it’s yours

@paulzapol9840 4 жыл бұрын

Yes

@dickhead1 4 жыл бұрын

Id love to buy it