Behringer Crave. Expressive Bass with Sequencer Tutorial. Patch Ideas
Рет қаралды 48,818
4 жыл бұрынThe combination of nicely set sequence and patchbay/synth parameters makes Crave a really great bass machine with lots of articulations and happy accidents. I'm showing here some examples, but I'm sure there are many more things hidden in this synth.
🏮 Presets for Behringer Crave: antonanru.sellfy.store/behrin...
Contents:
00:58 First Steps
01:27 The role of Gate Length and Decay Time
03:47 Magical Assign Output
04:24 Clock to Cutoff
05:34 Mix Gate+Assign to Cutoff
07:00 Assign (Ramp) to Mix CV
07:54 Assign to Osc Mod
10:12 Assign (Random) to Cutoff
12:17 Assign to VC Mix
15:03 Off Topic - FXs. Assign to Osc CV and FM
17:03 Assign to Env Gate
21:04 Polyrhythmic Feel
Modulation of the Sequencer parameters
23:59 Assign to Env Gate and Hold
26:00 My favorite Moment
26:48 LFO to Reset
28:50 Assign to VCA CV
29:36 Tweak the Tempo Knob
antonanru.com/
#behringer #crave #behringercrave #tutorial #patches #patch #modular #presets #bass #experimental #techno #jam #eurorack #semimodular #demo
@AntonAnru 4 жыл бұрын
🏮 Presets for Behringer Crave: antonanru.sellfy.store/behringer/
@lykki2 4 жыл бұрын
This is the best video about patching crave i have seen.
@AntonAnru 4 жыл бұрын
thank you) but there are many others great videos
@kevmac1230 2 жыл бұрын
I am a retired dude getting into synths,I find them fascinating.I have a Crave, but wish I had a fraction of your knowledge.I subbed so maybe I can learn a few things.These settings demos are very helpful.Thanks!
@AntonAnru 2 жыл бұрын
You are welcome
@yorganyog 6 ай бұрын
Knowledge is obtained. Minute by minute. No One born ir has knowledge from thin air. Enjoy and go forward!!
@antf7930 4 жыл бұрын
Brilliant video! So many ideas! 👍👏
@FrankWilleke 4 жыл бұрын
Great video! Thanks for making it!
@valley_robot 4 жыл бұрын
Great tutorial mate. Thank you very much for this
@PhoenixGuitars 3 жыл бұрын
As many others have stated, your videos are the best and have really helped my understanding of the Crave patch bay. Thank you!
@AntonAnru 3 жыл бұрын
Thank you🙏
@JL-vg9tx 4 жыл бұрын
GREATEST CRAVE TUTORIAL VIDEO I'VE SEEN!!!!! Narration, tips and instructions on point!
@AntonAnru 4 жыл бұрын
Thank you for support
@TheWorld_2099 4 жыл бұрын
Hey man, your research and teaching of this synth is truly amazing... I’m definitely buying your patches...! Thanks for doing this.
@AntonAnru 4 жыл бұрын
thank you for kind words and support!
@Dongleboob 4 жыл бұрын
Very good video. Extremely informative. Cheers buddy.
@AntonAnru 4 жыл бұрын
Thank you
@buddner 3 жыл бұрын
Thorough and informative videos. Great work 👍
@AntonAnru 3 жыл бұрын
Thanks
@TheLeon1032 3 жыл бұрын
its highly probable that this is the most useful patch tutorial on the crave)) im subscribing, thanks man i was in the dark there for a bit, tidy, nice one
@AntonAnru 3 жыл бұрын
Thank you for the feedback
@Psionetics 2 жыл бұрын
Wonderful! Thanks for making these tutorials
@AntonAnru 2 жыл бұрын
You're welcome
@BarbieChaite 4 жыл бұрын
Nice tips, nice gear !
@konradpisarczyk8159 3 жыл бұрын
This video is extremely informative, many thanks!
@AntonAnru 3 жыл бұрын
You are welcome
@rossanderson1334 3 жыл бұрын
This was fantastic thank you. Really looking forward to trying this out when my CRAVE arrives.
@AntonAnru 3 жыл бұрын
Have a good time with Crave
@GreeenGiantt 3 жыл бұрын
Incredible stuff here thank you!!
@AntonAnru 3 жыл бұрын
Welcome
@tomphillpotts 2 жыл бұрын
Nice work again. Great to go really deep into what one piece of gear can do
@AntonAnru 2 жыл бұрын
Thank you
@andrewstanworth529 3 жыл бұрын
I've only seen two of your videos (so far!) But you are by far one of the best out there to explain stuff to people like me! (Not a seasoned analogue pro!) Thanks for these, they are UNBELIEVABLY HELPFUL! 🙏
@AntonAnru 3 жыл бұрын
Thank you for kind words
@DocBolus 3 жыл бұрын
Really really useful. Definitely going to be playing with my Crave this weekend
@AntonAnru 3 жыл бұрын
Good luck with it
@oldskooldeano 4 жыл бұрын
What a fantastic video! Thank you
@AntonAnru 4 жыл бұрын
You are welcome
@williamvine6887 Жыл бұрын
Anton what a fantastic video thankyo
@AntonAnru Жыл бұрын
Thanks
@manoelandreisfernandes8747 2 жыл бұрын
Thanks man, super helpful :D
@AntonAnru 2 жыл бұрын
you are welcome
@jarosawretkinjaro3483 3 жыл бұрын
Fantastyczne basy , jeszcze nie używałem kabelków z czinczami - bardzo czyrelne objaśnienia , dziękuje i pozdrawiam
@AntonAnru 3 жыл бұрын
thank you, wish you best basses!
@daveclassen5013 3 жыл бұрын
Damn, dude, you delivered such a great video! Thank you so much
@AntonAnru 3 жыл бұрын
Welcome
@hughkremer4026 4 жыл бұрын
This is a masterclass. I love that you use musical terms like expression and dynamics, rather than “this knob does this sound and this patch makes this sound.” Subscribed!
@AntonAnru 4 жыл бұрын
Thank you
@atarikid 3 жыл бұрын
fantastic video!
@AntonAnru 3 жыл бұрын
Thank you
@randyworby 4 жыл бұрын
Great video! I love all of these techniques and features. Just bought my own Crave and this video is hyping me up! Waiting for it to arrive so I can mess around with some of these
@AntonAnru 4 жыл бұрын
Hope you will enjoy the results
@andrewbowers7542 4 жыл бұрын
Same
@peterkarba2954 3 жыл бұрын
The amount of groove you got out of this little brat is just great.
@AntonAnru 3 жыл бұрын
Yes, there're lots of things may give
@Rafaeldeimperial 2 жыл бұрын
Excelente trabajo gracias por compartir conocimientos
@fairchild2008 4 жыл бұрын
Damn this is awesome bro😊
@AntonAnru 4 жыл бұрын
I'm glad you like it
@PC0067 Жыл бұрын
Ce qui m'étonne le plus ne sont pas les séquences mais la pureté du don du crave qui est extraordinaire.
@volt7cooltangs701 3 жыл бұрын
Awesome. Love it.
@AntonAnru 3 жыл бұрын
Thanks
@THEMIGHTYMOOSH 3 жыл бұрын
I've only had my CRAVE for a couple of weeks, happily making basic sequences and playing it over MIDI as another synth. But now you have opened my eyes to its full potential. I had no idea. Also, this is the most expressive video I have seen on KZfaq. I hope you make some more about CRAVE. Well done sir! Feeling inspired, I'm off to the studio 😃🇬🇧👍🏻
@AntonAnru 3 жыл бұрын
Thank you for the comment. You may find more crave tutorials on my channel
@THEMIGHTYMOOSH 3 жыл бұрын
@@AntonAnru yeah, I realized once I'd written the comment 🤪 and thanks again for a wonderful tutorial. I think you should be making in depth videos for Behringer!!!!
@pipinpipm3333 2 жыл бұрын
Great Job!!!
@AntonAnru 2 жыл бұрын
Thank you
@nfori83 4 жыл бұрын
Good job on the videos...
@AntonAnru 4 жыл бұрын
Thank you
@graphene1487 3 жыл бұрын
and for about 200USD this thing is just incredible. I really enjoy plugging the out of the LFO (Square or Saw)to the Hold. Creates a lot of interesting beats and artifacts within the tempo.
@BassBaseBerlin 3 жыл бұрын
Really great video! I'm playing electric bass and was just thinking about getting some device like the crave for having fun ... not just playing to a drum loop, but get some synth sounds as bass for jamming. I was just not sure if crave or other devices will be good ... but since this video, I fall in love with the crave. So I know the theory of synths - but your video just showed me the practical usage and how great these sounds can be. So for me - you are an magician of sounds on this device. Thanks for this video!!! GREAT! I just imagine to run the output also to tube (style) bass amps ... could be real fun ;-)
@AntonAnru 3 жыл бұрын
Thank you for the kind words
@EshockT 3 жыл бұрын
Thank you for this
@AntonAnru 3 жыл бұрын
🙏
@jamessusbilla 2 жыл бұрын
amazing. thank *YOU* yeah those happy accidents are awesome and always look forward to them and try to arrive to them somehow. my crave just arrived. i'll be following your 30 minute tutorial which in reality might take me all weekend to finish. lol. tons of fun. woo hoo! =) and yes. for less than $200, this is a steal of a deal.
@AntonAnru 2 жыл бұрын
Welcome
@SLEEP-236 3 жыл бұрын
Lots of comments saying this is the best crave patch video ever and I have to agree. Love the crave. Value for money is awesome although I’ve sent mine back for repairs as there is noise/interference from filter cutoff. Apart from that it’s great.
@AntonAnru 3 жыл бұрын
Thanks a lot
@omarbonifacino3381 Жыл бұрын
Very good friend
@AntonAnru Жыл бұрын
thank you
@syhr_samoht 4 жыл бұрын
THANKS!
@justletmesigninokthx 4 ай бұрын
really good
@AntonAnru 4 ай бұрын
Thanks
@christiantorma2440 2 жыл бұрын
so hammer !
@davidmochen 3 жыл бұрын
Bravo!
@AntonAnru 3 жыл бұрын
Thank you
@jomaroute Жыл бұрын
Thanks Thanks Thanks !
@AntonAnru Жыл бұрын
You're welcome
@nextmutant2886 3 жыл бұрын
Wow, expressive bass indeed !
@AntonAnru 3 жыл бұрын
Thanks
@yorkie_pudd 2 ай бұрын
I love my crave and I can't believe I'm only just seeing the video. If you have time and don't mind I would love to see how you sequenced that bassline.
@leoncapeta8118 20 күн бұрын
The best video I saw about the Crave. I also want to ask you how you can sync the Crave with the Daw, at the point that you Play the Daw and the Sequencer from the Crave starts too? Thank you very much
@alphanumeric1529 2 жыл бұрын
Just watched this vid, loved it, you display uses for the crave that are 1.21 gigawatts beyond what I've done with mine. I left a comment asking about what drum machine you use with the Crave, and then clicked the Starsky Crave sequencer tutorial, but I hit the back button to give this vid a thumbs up, because I forgot! When this page reloaded there were 909 thumbs up... I was faced with a dilemma. I decided to break the perfect synchronicity and put you at 910. Less elegant, but maybe a drop more juice for the algo! 🤣
@AntonAnru 2 жыл бұрын
On no, you've ruined that 909 magic) Thank you for the feedback)
@Magnus_Loov 11 ай бұрын
This kind of reminds of what the PCF ( "Pattern Controlled Filter") function achieved in the good old Propellerheads Rebirth. Interesting blurbs from the filter changing in a pattern that is in sync to the sequence playing! Something the old regular TB-303 (or the Behring TD-3) couldn't do!
@pixelatedbeatz 3 жыл бұрын
Best Crave video. Increible to see the result you r getting through the different patches. Can you connect for example a microfreak and transfer all of that cv sequence information to it? Thanks!
@AntonAnru 3 жыл бұрын
Thank you. I didn't try to connect them, but I'm 99% sure it should with. Freak sends regular cv, crave can take it
@manuelfernandez2174 Жыл бұрын
Genial
@Luigibeddu 4 жыл бұрын
Hi Anton, congratulations for your clarity! A question. The orange cable that comes out of the VCA/LINE, you connect it to the microphone input of the audio interface? Thanks and congratulations again.
@AntonAnru 4 жыл бұрын
You may convect it to line input
@julianhigginson 3 жыл бұрын
this is a great video! some really nice ideas. Well done! You get a like, a subscribe, and a notify. :-)
@AntonAnru 3 жыл бұрын
Thank you a lot🙏
@BPEMETO 7 күн бұрын
Thank you very much for the informative video!!! : ) I want to start with the Behringer's synths. I want to get the Crave, but what would you recommend to get right after it? The Edge , TD-3-MO ... or something else?
@AntonAnru 5 күн бұрын
I'd take Edge of course. A very interesting device. Plus, you can make a combo with Crave
@RastisLove 8 ай бұрын
Антон, спасибо за видео. Подскажи пожалуйста, как синхронизировать секвенсор на crave с td3?
@AntonAnru 8 ай бұрын
пожалуйста. можно по миди, можно по CV.
@dioporco8899 3 жыл бұрын
Great video Anton! I have a question: Have you noticed a sort of noise generating when the low pass filter is closing? my unit start to make this noise as you start closing the filter and cut the high frequencies and when is completely closed you can still hear the noise , especially if when playing low octaves- Thanks for your help and videos!
@AntonAnru 3 жыл бұрын
Didn't noticed, i should check it
@pirateradioFPV 6 ай бұрын
Pretty sweet, just couple of patch cables and it starts to breathe 😁
@AntonAnru 6 ай бұрын
Yes🤘
@pirateradioFPV 6 ай бұрын
@@AntonAnru As a result, I have one in the mail. Think I'll get the 303 clone too, real thing was ~1500€ when I was a teenager and way out of most peoples reach. That's like 3500-4000 modern money for a used mono synth😂
@bryzon559 6 ай бұрын
Hey man, diggin the dope sounds! How did you create that stutter effect at 24:26 ???
@AntonAnru 6 ай бұрын
this is ratchet. you may add it to any step. in the similar way as accents, slides and other modifiers
@bryzon559 6 ай бұрын
so Awesome! I love the way it sounds, very glitchy. I'll have to look into how to create this effect. @@AntonAnru
@dymaxionVehicle 6 ай бұрын
So first off this is a great tutorial and I've watched it a few times. I learn something new each time. I'm guessing you are triggering the sequence and the kick using Ableton at 120 bpm. My question though is how can I tempo sync Crave from Abletons' clock and run other tempo speeds? I can start/stop playback from Ableton but I can't tempo sync the Crave. I have tried midi clock and various setting in the Synthtribe app but none seems to work?
@AntonAnru 6 ай бұрын
Thank you for the feedback. What did you use for sync? Midi/usb or cv?
@CristobalGalitJr Жыл бұрын
Can you make a video how i can sync the sequences I bought from your site to logic pro? So I can add some drum beats?
@AntonAnru Жыл бұрын
You may find tutorials on how to sync logic with hardware synths via midi/usb. I don't use logic
@alexandrelopes8767 4 жыл бұрын
Cool video man. Keep it up! Do you have any ideas for sequencing Crave from Ableton live and recording into an audio channel? Personally I seem to encounter latency issues while doing this.
@AntonAnru 4 жыл бұрын
first of all you should set buffer size as low as possible. then Options (upper menu) -> Reduced latency when monitoring. then, don't use monitoring and recording on the same track. 1 track for monitoring, 2 for recording. final step, Ableton Live has lessons inside, find on in Audio Settings -> Driver Error Compensation and do everything suggested there
@alexandrelopes8767 4 жыл бұрын
@@AntonAnru That's really great. Ive managed to bring the latency down quite a bit! Thanks!
@philjass 4 жыл бұрын
Hey, Anton, Lots of patches on the Crave and the TD-3. Just one question, how could you connect a Doepfer A 111-1 VCO to the tie to create a sub oscillator?
@AntonAnru 4 жыл бұрын
Kb cv out from crave to cv input on 111, and tune it an octave down? Did you mean this or i got the question wrong?
@philjass 4 жыл бұрын
@@AntonAnru Thank you Anton for your answer, I will try and keep you informed...!
@rohanpp786 3 жыл бұрын
Have you sequenced the pattern in a DAW or in Crave? Any tips on syncing the Sequencer of Crave to the DAW?
@AntonAnru 3 жыл бұрын
I didn't try, but isn't it possible with midi output?
@electricmoon5402 Жыл бұрын
What is that software your using to change time division?
@AntonAnru Жыл бұрын
do you mean clock division for assign output? its' behringer synth tribe app
@brunoromero9954 Жыл бұрын
Please, How do I sinc crave's sequencer to the bpm I set on my daw. I use reaper
@AntonAnru Жыл бұрын
You may sync it via USB.
@BigTranquil 2 жыл бұрын
I was watching a video about the crave (comparing it to the Moog Mother) and he said notes can be linked/joined in the sequencer to make longer notes in the sequence. I will look at my history to see if I can find it.
@BigTranquil 2 жыл бұрын
kzfaq.info/get/bejne/gMuoma2Es7y1nYE.html It's quite long but I'm sure he says how to link steps to make longer notes. I hope it helps
@AntonAnru 2 жыл бұрын
Do you mean notes tie?
@BigTranquil 2 жыл бұрын
I haven't got my crave yet, I'm just learning about it but yes, now I recall I think he said notes can be tied to make them longer
@manouvellepassionquiquequo2043 3 жыл бұрын
hello, thanks for your video, I have a question: four minutes from the video, we see a software image. What is this software please?
@AntonAnru 3 жыл бұрын
hello. this soft is official behringer app - SynthTool. you may download it on behringer website
@manouvellepassionquiquequo2043 3 жыл бұрын
@@AntonAnru thank's a lot...it's possible to ask another question about that , because i'm french and the notice is difficult to understand it.where installé it or wich daw accept this soft..i understand if you'are not OK ..thank's again
@AntonAnru 3 жыл бұрын
It's a standalone app, you don't need daw to use it.
@manouvellepassionquiquequo2043 3 жыл бұрын
@@AntonAnru thank's a lot....
@TheStaubzauger 8 ай бұрын
Hi, can you tell how / where you programmed the sequence? On the crave hardware or with software ?
@AntonAnru 8 ай бұрын
i used synthtribe app for making seqs
@TheStaubzauger 8 ай бұрын
@@AntonAnru thanks for your reply Anton 👍
@user-sx2iw2hq3l 4 жыл бұрын
Антоха, привет. Меня Алексей звать. Ты уже разобрался с Crave сиквенсором. Расскажи, смог ли нпйти на русском или сам во всем разобрался? Какое твое мнение по поводу этого недорогого синта, как его можно использовать в современном EDM или House?
@AntonAnru 4 жыл бұрын
Привет, Алексей. На русском вряд ли есть. Но есть на английском хорошие. С передней панели можно быть сложновато по началу. Можно делать с помощью приложения, там все интуитивно. Любой синтезатор относительно универсален, edm - почему нет..? Можно как минимум басы и лиды делать, и конечно в эксперименты уходить
@user-sx2iw2hq3l 4 жыл бұрын
@@AntonAnru Понял. А какое приложение ты имеешь ввиду--?
@AntonAnru 4 жыл бұрын
у крейва, как и у многих других, есть приложение synthtool, доступно в разделе загрузкок на странице продукта на сайте беринджер
@alphanumeric1529 2 жыл бұрын
So what drum machine do you pair this with?
@AntonAnru 2 жыл бұрын
They were Ableton drum racks or just samples. Don't remember exactly
@andyjohnson9714 3 ай бұрын
Прикольно! А что в качестве секвенсера?
@AntonAnru 3 ай бұрын
Встроенный секвенсор
@andyjohnson9714 3 ай бұрын
@@AntonAnru пробелом ты запускаешь внутренний секвенсор через родное приложение?
@AntonAnru 3 ай бұрын
Нет. Пробелом я запускаю плей в Ableton. А лайв посылает клок на синт
@yats7322 3 жыл бұрын
Круто . А по русски будет что-то ?)
@AntonAnru 3 жыл бұрын
Спасибо. На русском да, но пока сильно меньше. На канале Anton Anru Moscow
@yats7322 3 жыл бұрын
@@AntonAnru спасибо
@okDrug 3 жыл бұрын
а по русски можно такой туториал?) а то нет нигде(
@AntonAnru 3 жыл бұрын
К сожалению, пока нет
@DDDUser-ss3kx 4 жыл бұрын
Может ты и на русском сделаешь подобный обзор?! Я думаю многим будет интересно и более понятно...
@AntonAnru 4 жыл бұрын
Понимаю. Но очень много времени уходит. Многие в России в принципе понимают, тем более с родными акцентом ещё легче
@VortexMechanic Жыл бұрын
Блин Антох, а по русски нельзя было сделать видос то?
@AntonAnru Жыл бұрын
Можно было б
@DominicJacksonFilm Жыл бұрын
meh still sounds like a kinda average normal synth sound to me... interesting modulation and use of the functions though
@AntonAnru Жыл бұрын
I guess it wasn't supposed to sound extraordinary. It has regular analog synthesis, but the sequencer and the patchbay make the synth much more interesting
@DominicJacksonFilm Жыл бұрын
@@AntonAnru yes.. I am not sure what I meant. But I have found it hard to get my hands on a synth I liked. I like the modal skulpt... I tried two behringer synths the neutron and pro 1 and felt they sounded bad like non musical, harsh, nasal... The crave sounds better than both. I want to try the k2 as it seems modelled after the korg which sounds really nice to my ears, iconic. Thanks though I didnt even realise you could do those things on the crave it really is rich in features even with limited osc and env
@AntonAnru Жыл бұрын
@@DominicJacksonFilm you may probably like moog sound more (for more money of course)
@DominicJacksonFilm Жыл бұрын
@@AntonAnru I guess that is it, I heard others have similar complaints about the neutron, nasal and harsh, and they cut the over drive and filter out of the signal chain with the patching. I just dont know why they had that over drive in there it really was nasty imo and even when fully off seems to be in the signal chain.. like the delay it bleeds into the circuit. Not sure about the behringer synths so far, seem hit and miss but behrigner always been a bit like that.. I have used their products for 20 years and loved many of them! :-)
@Antoine_Jldt 3 ай бұрын
You should have done also a tutorial to make this sequence instead of selling it…
@AntonAnru 3 ай бұрын
Hope this is not what you do on daily basis: telling other people what they should do
@Antoine_Jldt 3 ай бұрын
@@AntonAnru just saying that you’re making a tutorial on a sequence that not everyone has. It would have been easier to follow the tutorial if we had the sequence note and everything. Not telling you what you should do. Just a noting lol
@AntonAnru 3 ай бұрын
@Antoine_Jldt sorry if i got you wrong or was rude. Some people like what i do, but they want it free and no selling. This is what i don't understand
@Antoine_Jldt 3 ай бұрын
@@AntonAnru oooh no worries 😉. Sometimes it’s easier to understand what you see or do if there was a tutorial on maybe just the bass line you’ve done.
@user-ry7gj6to1w Жыл бұрын
На английском дофига такого контента. А смысл? Русско-язычная аудитория по бороде... А ведь было интересно. Судя по количеству комментов с аналогичной просьбой: давай на русском!
@AntonAnru Жыл бұрын
На самом деле конкретно такого - не так много. По крайней мере на момент выхода серии про Crave 4 года назад таких подробных и детальных по фишкам не было. Обзоры - да. Но я их и не делаю.
@user-ry7gj6to1w Жыл бұрын
Антон, у меня тоже есть свой канал, правда тухлый, 7 подписчиков: жена и собака. Но там реальная музыка (не мелодии конечно, но мысль). Послушай, может быть что то зайдёт. Последняя вещь совсем новая, вышла 10 марта. Так вот: к моему сету скоро добавится crave, и будет много вопросов... Канал то не написал: " Experimental Dance Music Lab"
@AntonAnru Жыл бұрын
Включите субтитры с переводами на русский. Может с терминами будут проблемы, в остальном все понятно будет. Я планирую делать больше видео на русском. Но это точно не будет дублированием контента с переводом
@user-ry7gj6to1w Жыл бұрын
@@AntonAnru попробую
@digitalsea9147 Жыл бұрын
Wheres the bass drum and hi-hat bro?
@AntonAnru Жыл бұрын
From Ableton
Immersed
Рет қаралды 92 МЛН
Anton Anru
Рет қаралды 31 М.
Andertons Synths, Keys and Tech
Рет қаралды 38 М.