BikeMods - HyperPro Tuning

BikeMods - HyperPro Tuning - R1100GS

Рет қаралды 2,656

Күн бұрын

Today i'm fine-tuning the preload settings for the new HyperPro shocks and after that it's time to ride and test them out!!
follow me on social media:
instagram: / m0tourist
Facebook: / m0tourist
------------Content--------------------
00:00 Intro
00:38 Setting up the front HyperPro shock
01:24 Measuring the front sack
03:58 Removing the front shock
04:18 Adjusting the front Pre-load
05:57 Installing the front hyperpro shock
06:16 Remeasuring the front sack
07:13 Setting up the rear HyperPro shock
08:18 Measuring the rear sack
09:43 Test-Ride
14:10 Outro
------------Content--------------------
⚙️ GEAR ⚙️:
🏍 BMW R1100GS
Vlogging setup: • How To get Cardo audio...
GoPro Hero 9: amzn.to/3ImXU6v
GoPro AudioAdapter: amzn.to/36d3BHd
3.5mm TRS Audio Splitter: amzn.to/36auPOE
3.5mm Microphone Attenuator Cable: amzn.to/3qiUziP
3.5mm Stereo Break-out Cable: amzn.to/36rKPvs
Mic: amzn.to/34TjqSC
Cardo Packtalk: amzn.to/3y0ToZR
🪖 Helmet: Nexx Xwed 2
🧥 Alpinestars valparaiso 2: www.hansvanwijk.nl/alpinestar...
👖 Alpinestars valparaiso 2: www.hansvanwijk.nl/alpinestar...
Boots: Alpinestars Toucan
🧤 Alpinestars SP8-V3 : www.hansvanwijk.nl/alpinestar...
🧤 Vanucci VCT Special: www.louis.nl/artikel/vanucci-...
🥾 Alpinestars Toucan
Music: www.bensound.com

Пікірлер: 9

@rickslijkhuis6822 Жыл бұрын

Great video! To make sure you have the absolute perfect starting point for your weight you should not only measure the static sag, but also the rider's sag. Don't know what that should be on an adventure bike like this, but on a normal street bike it's 1/3rd of the total travel distance of the suspension. Total travel distance is 120mm in front on my ride, so 40mm rider's sag is needed. If both type of sags are in spec, you'll know you have the right spring for your weight on your suspension. If the rider's sag is in spec, but the static sag to high (weak), then the spring is too soft. You can't even get to the proper rider's sag when the spring is too hard. Once sags are in spec then rebound is something pretty hard to measure. If it's too open at the rear (not dampening) the seat should shoot up and then down. If it's too much closed it should go up very slow. The best way is slow but controlled. In the front it should go all the way up controlled and then settle down slowly at the static sag (not more than one bounce up). I've learned a lot from watching Dave Moss Tuning videos. He's an absolute guru suspension wise.

@M0Tourist Жыл бұрын

Thanks for your comment, I may want to check the sack with the rider as well, but its pretty hard on your own🤣. The static sack is compensated already for the rider (although rider weight differs of course). On the front the sack was 35 mm (static) and on the rear only 15 out of my head... Suspension travel is 190mm if I'm correct, so 30% is 47 mm with the rider.

Жыл бұрын

Thank you for the videos. Which bellows did you purchase for the front forks? Are you happy with them?

@M0Tourist Жыл бұрын

I've asked my mechanic to install them, so I'm not sure which ones he installed. They're pretty standard rubber bellows, nothing fancy. They're lasting for 6 years at this point and i'd no complains...

Жыл бұрын

@@M0Tourist Thanks. Lets see what i will find in Ebay for cheap.

@michaelbmw1931 Жыл бұрын

Hey ! Are tgese bike good ? I bought one today througt tge internet and I will pick it up in. Couple od days ..

@M0Tourist Жыл бұрын

The bike is pretty though, there are plenty of examples of people doing over 300k on them. They are also pretty simple to work on and there are good shop manuals available. Enjoy the bike and ride safe!