2 ай бұрын
5 ай бұрын
5 ай бұрын
6 ай бұрын
7 ай бұрын
8 ай бұрын
9 ай бұрын
11 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@royc5634 4 сағат бұрын
Dus wanneer kunnen we red rino overkopen 😂
@goldmarkg Күн бұрын
I installed this upgrade several days ago on my 1994 R1100RS which has 24,000 miles on it.. The whole job was simple and took less than 30 minutes. My idle is definitely smoother and the throttle response is improved. I think this upgrade is well worth the price ($170 including shipping).
@M0Tourist 6 сағат бұрын
Good to hear!
@markkthemk 4 күн бұрын
Earlier this year I bought a 1200 GS (not adventure) from 2008, 105K, 3 set vario cases, new tyres, simple crashbar, ABS (no traction control or ESA) in good condition and 1 year warranty for a little over 6000. So something similar for the GSA version with more rugged cases and protection/crashbars and features in the 8000 range is realistic. I'm also from NL.
@M0Tourist 4 күн бұрын
The adventures are always a bit more expensive, this only did 58K km and had all the bells and whistles. Never the less the almost 9K was over-asking... Especially considering it needed service and new tires. How do you like your 1200?
@manusvdb4918 11 күн бұрын
Werken deze ook op de r850gs?
@M0Tourist 4 күн бұрын
Ik denk het wel: www.tills.de/product-11.html
@tatsu9819 11 күн бұрын
Is it big upgrade enought to think change to 1200gsa from 1100gs. I've been thinking to change but somehow I just love 1100gs reliability and how it runs clean. I'm bit afraid to switch newer bike due to their price and possibility to get bad bike where I have to spend even more money in long run.
@M0Tourist 10 күн бұрын
I'm a bit on the same page, as I explained I'd an event coming up that I wanted to do. The 1200, especially the '08 & '09, are pretty good as well. Like a sophisticated 1100. But it's pretty pricy, especially with the outstanding work on this bike. Came down to having a newer bike, with some additional features like ABS & ESA, that rides better (but not 10k worth of money better). It's not the huge leap forward as the 1250 GS is
@mickcook9277 12 күн бұрын
What's wrong with Rhino?
@M0Tourist 10 күн бұрын
It's in the 2nd part of the video. Red Rhino didn't run right, after my mechanic changed the throttle cables it cut out during a test ride. Turned out that it was something in the fuel system, either the distribution or the quick disconnects....
@MichaelHaak-w9b 12 күн бұрын
Heel tof! Is er een manier waarop ik je kan bereiken? Ik ben bezig met hetzelfde maar je bijgevoegde 3D mal sluit niet goed aan op mijn koplamp
@M0Tourist 4 күн бұрын
Je kunt me via Instagram of Facebook een bericht sturen
@TrinityRSV 21 күн бұрын
A lot smoother? Your head jerky around. Really?
@M0Tourist 20 күн бұрын
May be smoother is not the right wa ** y of wording... I've also riden the 1250 gs with quick-shifter and that wasn't buttery smooth either. With these large 2 cilinder bikes there is a lot of mass moving, which gives you a little kick in the higher regions. The better word was a lot more fun
@jeremylewis7486 22 күн бұрын
Nice work! What was the thickness of the metal sheet that you used?
@M0Tourist 4 күн бұрын
3mm, might be a bit overkill though 😆
@serginiogoudmijn4264 Ай бұрын
Hoi waar kan in Dr Spiegels vinden
@M0Tourist 4 күн бұрын
Ik heb er een video van: kzfaq.info/get/bejne/iamGebmEnK-VmY0.html
@saanko8742 2 ай бұрын
Please continue putting content!
@M0Tourist Ай бұрын
Will do!
@alexanderpothof2653 2 ай бұрын
Waar heb je de nieuwe startmotor gehaald? Heb hetzelfde probleem
@M0Tourist 2 ай бұрын
Ik heb 'm bij Rene Stoops van stoops motoren gehaald. Oude inleveren en dan krijg je een gereviseerde me voor iets meer als 100 euro als ik het goed heb. Alternatief is er een op de sloop halen of OEM kopen
@alexanderpothof2653 2 ай бұрын
@@M0Tourist Dankjewel
@joot5327 3 ай бұрын
Can you send me the link to the suspension, and the price, Thank you.
@M0Tourist 3 ай бұрын
www.hyperonline.nl/contents/nl/p1071_Hyperpro_Streetbox_BMW_R_1100_GS_1994-1998.html
@TheVictorFour 3 ай бұрын
Like this, thank you!
@psychofreack 3 ай бұрын
are your control cables stock or did you have to change them to work with the risers?
@M0Tourist 3 ай бұрын
The clutch & throttle cable are stock, same as the wiring. Those fit, although I wouldn't go any higher then the 50mm, then you'll need to lengthen the throttle cable. I do have aftermarket brake hoses, so I can't tell you anything on that...
@psychofreack 3 ай бұрын
@@M0Tourist thanks for replying. I did try out a friend's risers and they seem to fit without cable adjustments. I ordered 30mm ones and i'll be back with feedback. Thanks!
@M0Tourist 3 ай бұрын
@@psychofreack Good luck & happy riding!
@motooilermotooiler9597 3 ай бұрын
Brave of you. I would never mix the vulnerable r1100 tranny with this contraption.
@ariouredy6064 4 ай бұрын
Nice exhaust ! What brand is it? Are you happy with it?
@M0Tourist 3 ай бұрын
It's a superpole exhaust, reasonable happy with it !
@roflmap 4 ай бұрын
Wow ik was het alweer vergeten maar wat was dit leuk zeg!!
@M0Tourist 4 ай бұрын
Ik zou zo weer gaan 😆
@jwruskus5900 4 ай бұрын
Bekent terrein rond Zandoerle
@M0Tourist 4 ай бұрын
Was leuk rijden daar, zat ook nog ergens een paadje zand tussen 😆
@royc5634 4 ай бұрын
Bedankt voor de leerzame video. Kan niet wachten op deel 2 😊
@M0Tourist 4 ай бұрын
Bedankt, ik heb nog wat werk aan deel 2😂
@royc5634 5 ай бұрын
Dit lijkt zo intensief ingreep gelukkig weet je wat je doe. Mijn motor doet nu ook raar hopelijk volgende week heb ik het probleem verholpen
@M0Tourist 5 ай бұрын
Het zou ook moeten kunnen zonder de cardan eraf te halen... Alleen heb je dan wel hele kleine handjes nodig... En je ziet niks🤣
@nigelmackenzie7888 5 ай бұрын
Are the footrests any lower as I find the originals too high to be comfortable? The originals are far too high and small even though I have the seat on the higher position.
@M0Tourist 5 ай бұрын
They're lower and a bit wider, and so far comfy :)
@nigelmackenzie7888 5 ай бұрын
Thanks 👍
@harisb7862 5 ай бұрын
hello there!! where did you get the mobile holder that clamps around the speedometer! it looks so nice!
@M0Tourist 5 ай бұрын
Bought it years ago, still very happy with it! www.motorenwebshop.nl/navigatie-montagesteun-r1100gs-ms-steun/
@MikeTheCretan 5 ай бұрын
If you would wait bit longer, you could upload it 2024 ascension day 😂😂! Very nice video, nice info for the water towers (watertoren)? . And nice idea for a ride. Dankjewel manier! 👍🏻👍🏻
@M0Tourist 5 ай бұрын
I'm still catching up on last season's rides, but yea... At some point, I rather go & ride , instead of edit the vids😂
@MikeTheCretan 5 ай бұрын
@@M0Tourist so true!!
@user-hh1fm3ug4k 5 ай бұрын
I have the exactly same bike i think ...94 plastic tank ? Anyway, u know your stuff around the bike and i wanted to ask , what do u think that i have to be worrie of??any major issues ?? Thank you 🙏
@M0Tourist 5 ай бұрын
I've the steel tank, and the bike is from '97. If you go offroading on the bike make sure you install the gearbox reinforcements. For the rest, some TLC from time-to-time, but the bike is pretty straight forward to work on.
@patrickspapens5497 5 ай бұрын
installed mine on my track bike, but sensor was way too sensitive, up to the point the sensor would pick up so much vibrations from the shift rod it would just cut off ignition randomly, and even completely shut down the bike at one point. Took it out, left it out for about a year. Going to ride in Spain next week and installed it again, just need to mkae sure i check the sensor sensitivity. Thanks for uploading, this might just have been the problem
@M0Tourist 5 ай бұрын
Most likely the sensor threshold was nog set properly, this is a bit of trail and error😜
@patrickspapens5497 5 ай бұрын
@@M0Tourist yes you're absolutely right! Didn't want to lose track time last year so that's why i chose to remove it instead of trying to finetune it. But i'll definitely fiddle with settings a bit this weekend. Threshold and noise filtering will be my two focus points, and then i'll go from there.
@royc5634 5 ай бұрын
Lets go bedankt voor de leuke en leerzame vlog.
@M0Tourist 5 ай бұрын
Dankje, was een leuke training om te doen. Echt een aanrader!😀
@redi320 6 ай бұрын
Where exactly is this?
@M0Tourist 5 ай бұрын
I need to check the exact name, but still should have the GPX file for it. Send me a message on insta😉
@timothyangus954 6 ай бұрын
Hepco & Becker have been making quality German luggage for many years, and made the original Krauser cases fitted to BMW in the 70’s. I have similar top loading Givi cases on my V strom and they are more practical to use than side loading ones.
@M0Tourist 6 ай бұрын
Both the side and top casese have the pro's and con's. The onces from Hepco & becker are really nice and easy to take off
@DeanML576 6 ай бұрын
Happy new year!
@M0Tourist 6 ай бұрын
Happy new year, onwards to new adventures!
@geoman321 6 ай бұрын
WISH A HAPPY NEW YEAR FOR 2024 GREETINGS FROM GREECE! GEORGE & STEF with 2 R1100GS
@M0Tourist 6 ай бұрын
Thanks man! Happy new '24 to you as well, hope you have many nice adventures on the bikes this year!
@Tafkadasoh78 6 ай бұрын
Whats your additional rear dirt-protector and where can I get one? :) I'm looking for one for my GS.
@M0Tourist 6 ай бұрын
I believe mine are stock, if yours are missing you can find them in the standard parts list.
@Tafkadasoh78 6 ай бұрын
Hmmm... the rear mudguard shouldnt be stock. Okay, I keep looking. :) @@M0Tourist
@M0Tourist 6 ай бұрын
@@Tafkadasoh78 the one on the rear wheel : part number 46 62 2 313 253: MUDGUARD REAR the one in front of the shock: Part number 61 13 2 306 227 MUDGUARD Good Luck!
@Tafkadasoh78 6 ай бұрын
Okay, so my (hopefully) last question - where do I find the standard parts list? :) @@M0Tourist
@M0Tourist 6 ай бұрын
@@Tafkadasoh78 shop.maxbmw.com/fiche/DiagramsMain.aspx?vid=51668
@rockgin 7 ай бұрын
Good video. I just ordered a performance chip from John. Does your GS have the stock exhaust and catalytic converter? If "yes", then you might not feel as much of again with the chip. My GS has a cat-delete mid-pipe and a very free flow exhaust...so, I'm hoping for a very noticeable gain. And yes, my bike is already very loud. 😀
@M0Tourist 6 ай бұрын
Hey Rockgin, mine also got a cat delete and aftermarket exhaust (with DB-killer). In my opinion it produces a very nice moderate sounde 😉
@Tafkadasoh78 7 ай бұрын
Nice work man! I got my 1100GS just a few weeks ago - year of construction is 1994 - YEAH! (:
@M0Tourist 7 ай бұрын
Nice! The bikes are pretty easy to work on!
@Tafkadasoh78 7 ай бұрын
I hope to get some useful tipps from you/your videos. :) I'm so excited for the first real ride... @@M0Tourist
@M0Tourist 6 ай бұрын
@@Tafkadasoh78 Enjoy and have fun, if there is anything you want to know, just ask !
@muddysoles 7 ай бұрын
Thank you for this video. Do you think the peak from the Xwed2 will fit the XD1?
@M0Tourist 7 ай бұрын
It's almost the same helmet, but the xd1 only had 2 shell sizes and the xwed 2 has 3. My gut feel says it will fit, because they most likely only make 1 size peak
@muddysoles 7 ай бұрын
@@M0Tourist thank you
@AB-hx9hs 7 ай бұрын
Thank you for NOT buying from Amazon. Amazon sucks and it is the WORST.
@M0Tourist 6 ай бұрын
Depends on what you want to get from Amazon 😂
@allseeingotto2912 7 ай бұрын
That’s pretty cool . Do you know where I can buy a shorter beak for my 1100 GS ? .
@M0Tourist 7 ай бұрын
I've only seen them a few times, but cannot recall if there is a shop selling them...
@garybarton8815 8 ай бұрын
yes have you had any issues with abs
@M0Tourist 7 ай бұрын
Nope, mine came without it :)
@hayrack8937 8 ай бұрын
Did you synchronise? Ignition on, fully open and close throttle twice. Turn off ignition. Gear on and go for a ride!
@M0Tourist 8 ай бұрын
I'd the throttle bodies synced afterwards ;)
@Marfreb 9 ай бұрын
Hi, thanks for your videos! I own an old R 850 GS and I wanted to ask you, because you can't see much in the video, how do you connect the Daytime Running Lights to the headlight wires of your 1100 GS? can you help me? Thanks and keep going!
@M0Tourist 9 ай бұрын
Hey Marfred, I've connected they daytime running to my parklight, but if you want to have it always on you need to run some additional wires
9 ай бұрын
Also you have to apply TPS resetting procedure after the chip installation , otherwise cant take effect . Then ride 5-6 km. for remapping the ECU .
9 ай бұрын
l been using this genius chip more than 5 or 6 years l can't remember. And from the first day till today it's just amazing. Thanks John again it's pretty amazing upgrade for our beemer. ⭐⭐⭐⭐⭐
@garret5867 10 ай бұрын
"promosm"
@royc5634 10 ай бұрын
Bedankt voor alle filmpjes heb net mijn eerste 1100 gs gekocht met veel onderhoud. Jij bent echt een baken in het donker 😝
@M0Tourist 10 ай бұрын
Hey Roy, Veel plezier met rijden en sleutelen!
@royc5634 10 ай бұрын
@@M0Tourist bedankt zal het nodig hebben 🥲
@M0Tourist 10 ай бұрын
@@royc5634 je kan me altijd een berichtje sturen via insta als je wat wil weten😎
@elsgarage4117 10 ай бұрын
Hello! Great video thank you for taking the time to create this. Am I right that the quick shifter cuts the ignition? I might be wrong but you’ve connected it on the injector side. Thanks
@M0Tourist 10 ай бұрын
Hey elsgarage, You're right, it cut's the fuel injection off momentarily, but you'll still have a spark (i think, didn't test it).
@elsgarage4117 10 ай бұрын
@@M0Tourist thank you for your reply I appreciate it! If you can share your data such as cut times and threshold that works perfect for you I can use this also. I have a 2008 r1200 and have just fitted a healtech QS - I’m in the tweaking stages. Thanks again and happy riding! Kind Regards
@M0Tourist 10 ай бұрын
@@elsgarage4117 you can contact me on Instagram, probably easier then via the comments ;)
@JohnAlot 10 ай бұрын
When editing your next video please reduce the music volume. It was often louder than your speech & difficult to hear what you were saying.
@M0Tourist 10 ай бұрын
@johnAlot thanks for the feedback, I'll turn down the music a bit for the next video!
@superholgi1 10 ай бұрын
which filament was made for 3D printing? ABS?
@M0Tourist 10 ай бұрын
It has been printed in PETG
@jeffvaljean6030 10 ай бұрын
Your a brave man to trust that stuff 😮
@M0Tourist 10 ай бұрын
I'm still pretty happy with the quickshifter after more than a year. It's not as fancy as a factory install on modern bikes, but it is proven technology... The sensor in the shifter sends a signal to cut the ignition for 1 or 2 cycles, which eases the pressure on the gears and enables you to shift while keeping the throttle open. The most 'tricky' part is setting the threshold for this signal correctly, but that is not too difficult... I mainly use it on hard acceleration, but definitely not all the time
@jeffvaljean6030 10 ай бұрын
Nice bike they are built to last