How To Make A Resin Master Mold For Silicone Molds

Рет қаралды 2,072

Ай бұрын

In this tutorial we show how to make a permanent resin "master Mold" that can be used to mass produce molds for production casting. In this video we start with a 5110 silicone mold and make a master mold with our ArtKast resin. The finished master mold may be used to produce many faithful copies of the original mold.
Video Library: www.brickintheyard.com/pages/...
5110 Silicone: www.brickintheyard.com/produc...
Zip 301 Mold Release: www.brickintheyard.com/produc...
Hi-Temp Paste Wax: www.brickintheyard.com/produc...
E236 Spray Release: www.brickintheyard.com/produc...
ArtKast White Resin: www.brickintheyard.com/produc...
PolyPig Pigment: www.brickintheyard.com/produc...
1630 Tooling Resin: www.brickintheyard.com/produc...

Пікірлер: 14

@lifeholdstrategic Ай бұрын

@vantikistudio has some great videos on the subject of making master molds for slip-casting.

@bitymoldsupply Ай бұрын

Thanks!

@hechetonchieres Ай бұрын

You also have to ask for people to comment, that's part of the algorithm voodoo ;)

@bitymoldsupply Ай бұрын

Dang algorithms…

@CHIPNDEATH Ай бұрын

for two pieces Mold, is the Hi temp, paste wax will work to keep the resin to stuck and release the other half of resin mold ??

@bitymoldsupply Ай бұрын

I’m some cases I use SAM-32 silicone adhesive to stick the mold to the base board.

@noviceartisan Ай бұрын

Got any good tips for making the master mould super glossy/shiny? I 3d print from resins, but client needs shiny moulds and not sure what's best practice that doesnt' involve toxic indoor fume sprays lol

@hechetonchieres Ай бұрын

I've seen Harrison Krix of Volpin Props make a type of acetone fume chamber, and somehow that softens out the lines.

@hirudoKamishi Ай бұрын

What typically helps getting a shiny/glossy surface is sanding the material. Works with about everything from metal to all types of plastic. You would need some super fine sand paper though, talking about 1000 grit upwards to about 5000 grit (I did this with acrylic for example, now the edges of cut pieces are also super see-through and smooth of course). Resin, plastic etc should be wet sanded for best results.

@thomasbecker9676 Ай бұрын

Elbow grease and various grits of sandpaper.

@bitymoldsupply Ай бұрын

Yes! Elbow grease and time!