Toilet Flange Repair

Рет қаралды 33,189

2 жыл бұрын

In this toilet flange repair video, I'm learning some more new tricks from my plumbing colleges. In my service area of Brooklyn, New York 90% of the toilets I pull are connected to a lead toilet bend.
A brass toilet flange is soldered in place and on occasion they'll fail a begin to separate. No problem, being an old-timer I get out the old soldering toolbox and proceed to solder on a new brass toilet flange.
Well, I recently discovered two products from the Oatey company a plumbing specialty supplier that could make me retire my soldering box forever! They feature two P.V.C toilet flanges designed to fit into cast iron pipes. But guess what? They also fit pretty well into 3" & 4" lead pipes.
Toilet flange repair in lead toilet bends is about to change forever! In this toilet flange repair, I show you how to use two of these new toilet flange repair products which quite possibly will allow me to eliminate soldering brass floor flanges forever!
Enjoy & Happy Plumbing!
Bob
Oatey 43651 PVC Twist-N-Set Closet Flange, 4" x 4" x 4", White
amzn.to/3nfvpjQ
Oatey GIDDS-173390 43539 Replacement Flange Forcast Iron, 4-Inch, PVC
amzn.to/3Di7uppHappy Plumbing!
My Amazon Storefront:
www.amazon.com/shop/bobsplumb...
Thank you so much for checking out my FREE KZfaq videos, I hope you find value in them and just maybe save you some money by not having to call in a plumber!
In addition to the comments & questions below the videos, I also get plenty of e-mails asking for specific solutions to specific problems that only a job site visit could solve.
To the people who are local to my service area, that’s a piece of cake. But to the many viewers outside my area, it’s an issue. I often get multiple e-mails basically asking for step-by-step instructions for specific jobs.
I am available to clarify your questions and think the best way to do it would be through a remote consultation via zoom or what’s app or FaceTime, whichever you prefer. Tell me the best day and time that's convenient for you and we can schedule it.
Send your requests to info@robertsessaplumbing.com, and make sure to put "Video Consult" in the subject line. I forward you all the details.
Happy Plumbing
Bob
Please Read My Disclaimer Below:
My Videos & Consults are provided for informational purposes only. All material provided is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The plumbing instruction used here is used to simply break down jobs into their simplest steps.
Please use a clear mind and use all safety precautions following the tutorials or consults provided. I Do Not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility for what you do with the information provided. You must be aware that by doing projects on your home you are doing it at your own risk and Bob's Plumbing Videos cannot be held liable if you cause any damage to your home.
With different building codes around the world and constantly changing standards, regulations, and rules, it is the YOUR sole responsibility to EDUCATE yourself on YOUR local requirements before undertaking any sort of project. That being said Bob's Plumbing Videos cannot claim liability with all applicable laws, rules, codes, and regulations for a project. Be safe, have fun with your plumbing repairs, and ALWAYS stay informed with your local building code.
*NOTE: This description above contains affiliate links that allow you to find the items mentioned in this video and support the channel at NO COST TO YOU. While this channel may earn minimal commissions when the viewer uses the links, the viewer is in NO WAY obligated to use these links.
Thank you for your support!

Пікірлер: 137

@dannycorleone9590 2 жыл бұрын

You’re the best Bob!

@marianobotello1504 2 жыл бұрын

Great explanation and teaching.

@briandjordjevic9969 2 жыл бұрын

Great video as always Bob!!

@everythinghomerepair1747 2 жыл бұрын

Thanks. Your videos are always so thorough and cover real world scenarios.

@BobsPlumbingVideos 2 жыл бұрын

Nice to hear my friend! A welcome change from the "Trolls" who complain I droon on and don't get to the point soon enough. Bob.

@thankswillie 2 жыл бұрын

greatest respect for plumbing in NYC,nice video,thanks for showing the lead

@BobsPlumbingVideos 2 жыл бұрын

You're welcome!

@Mark-xv5lb Жыл бұрын

Great video. Greetings from Brooklyn Hts. We have a rocking toilet that needs to be re-set. Two videos by you have clarified exactly what we need to get done.

@BobsPlumbingVideos Жыл бұрын

Glad it was helpful! Thanks for stopping by the channel! Bob

@realestateservicessaleshea99 2 жыл бұрын

Thanks again for the videos! 🍺🍺🍺🥃🥃🎯🏌🏻‍♀️👍🏻

@SA-iw4ci Жыл бұрын

I'll tell you what I think. I think you just made my current lead pipe dilemma become not so much of a dilemma. And for that I thank you. Thank you.

@BobsPlumbingVideos Жыл бұрын

You're welcome!

@easyhangit604 Жыл бұрын

I live on SI. Do you do house calls. I got issues with this.

@anthonykotoff3041 2 жыл бұрын

I still do it the hard way because it’s the best way. Good video

@williamdyckman9704 2 жыл бұрын

Bob, thanks for your video!!

@BobsPlumbingVideos 2 жыл бұрын

Thank you!

@richardgarcia6108 2 жыл бұрын

Excellent video! I’ve always wondered if there was an alternative to soldering a brass closet flange when you have a lead bend. In my this is revolutionary. Wow! Sometimes I come across these lead bends with that cheap, awful red or blue color coated steel closet flanges. They oxide very easily. Now I have a better option. Thank you!

@jacksplumbingvideos7147 2 жыл бұрын

In the 1960s and 1970s there were ABS pressure fittings, the smallest they came in was ½, yardley was one of the manufacturers. Yardley also made SCH 40 PVC and ABS DWV. Yardley PVC DWV was not used much but the Yardley ABS DWV was everywhere back then, Genova was the most common PVC DWV manufacturer in the 1960s.

@juliusjames6229 4 ай бұрын

Thanks for the info about try the twist flange on my lead bend toilet flange.

@florence3146 2 жыл бұрын

great video i have to do this type intervention on lead pipe thank you bob

@LUK0BA Жыл бұрын

Thank you for what you do.

@BobsPlumbingVideos Жыл бұрын

I appreciate that, Bob.

@mastic5519 2 жыл бұрын

Heading to pick one up to merge with my lead, thanks.

@genepharmer4763 4 ай бұрын

Glad I found this!! Thank you very much

@BobsPlumbingVideos 4 ай бұрын

Thank you for checking it out!

@james_vee9995 Жыл бұрын

This video saved my life!

@BobsPlumbingVideos Жыл бұрын

Glad to help!

@Arieeeee Жыл бұрын

I wish I had seen this last week!

@mrkrasker9609 2 жыл бұрын

I am a do it yourselfer, I have had good luck using the Set-Rite Kits on lead.

@seanmcnally1132 2 жыл бұрын

Hey Bob, Kool video and thanx for the tips.

@BobsPlumbingVideos Жыл бұрын

You're very welcome!

@Junkboy888 2 жыл бұрын

Great video !!

@BobsPlumbingVideos 2 жыл бұрын

Thanks for the visit

@louietheplumber3609 2 жыл бұрын

Good one Bob I use them they work but the old way is much better & that’s true plumbing

@BobsPlumbingVideos 2 жыл бұрын

Amen!

@scottcates Жыл бұрын

Thank you

@BobsPlumbingVideos Жыл бұрын

Thank you for stopping by. Bob

@shaundonovan2193 Жыл бұрын

Great video. Explanation was great. Just like trade school

@BobsPlumbingVideos Жыл бұрын

I appreciate that!

@scottcates Жыл бұрын

I installed an Oatey 43539 today in a lead bend and it worked great! Thank you for the help.

@BobsPlumbingVideos Жыл бұрын

Thank you for the visit! Bob.

@josephcade3541 2 жыл бұрын

After looking at your analytical intense stare on this new product I decided to call you Hawkeyes Nothing Gets By You so if you give your approval of it it's a safe bet that it's okay. Nothing surpasses your skill of analysis I now call you the hawk. Thankyou for your video mr Hawk eyes. LoL

@GoodQuestionsLeadToGoodAnswers Жыл бұрын

Modern plumbers take things easy too. I asked one of them to extend my lead pipe. He came with a tapered extension and instead of soldering it, it glued it with silicon! I was quite disappointed to realize that such an easy approach came with a nice premium! I was expecting some soldering between the extension and the original pipe. This is why I asked for a plumber otherwise I would've done it myself. All was very accessible, not flooring around.

@BobsPlumbingVideos Жыл бұрын

The new breed does not have the knowledge we old timers were taught back in the prehistoric days.😅

@RedfishCarolina Жыл бұрын

Yeah I just tried one of these press-twisty versions and it was a total fail. The cast iron was 2-7/8 inner diameter unfortunately. I even cleaned it back to bare metal on the inside and soaped up the rubber gasket, and it still wouldn't slip in without beating it in with a hammer and board.

@mike7gerald 2 жыл бұрын

Those plastic flanges reduce the drain diameter but the brass flange keeps the drain at 4", so you'd expect a better flush with the brass install. Also, the second plastic flange has the inner bolt protrusions that further interferes with the flush. I can see why old school may be preferable? However, I'm glad for the plastic flanges should the lead pipe be damaged and not able to attach to a brass flange.

@johnnymusic685 2 жыл бұрын

I was thinking the same thing. That second flange looks like it has a lot of protrusions for "stuff" to hang up on. In regards to the first one being smaller than 4 inch. Isn't the output from the toilet 3 inch, and also the stack that the 4 inch stub goes into?

@mike7gerald 2 жыл бұрын

@@johnnymusic685 In my situation: the lead bend is 4", it's the pipe sticking up from the floor. Since it was in good condition, I fastened it to the brass flange achieving an unobstructed 4" diameter. I installed a 'Kohler Elmbrook' toilet. It has a 2 1/8" output, all other brands also have this small output so that the horn can fit into the 4" pipe; (or some pipes are 3"). The first plastic flange should take the toilet horn no problem; and its real easy to install. The second one also would work, but I don't like those protrusions. For low flow toilets I want a CLEAR passageway so not keen on the second plastic one. My Elmbrook is working nicely. It's a low flow 1.28 gpf. If you let go of the handle, it's a partial flush; but If you hold down the handle you get the full 1.28 gpf.

@Progrocker70 2 жыл бұрын

@@mike7gerald I was thinking that too, the drain opening diameter seems too small, with the protruding screws that look like they can catch anything and cause a clog.

@mike7gerald 2 жыл бұрын

@@Progrocker70 The toilet trap-way has a 2 1/8" opening, so even that plastic flange with the protruding screws will handle it. Clogs will be rare provided dental floss and other stuff isn't flushed; only toilet paper and poop should ever go down.

@scottcates Жыл бұрын

I'd rather snake a drain than tear out and rebuild a floor because of a 20-year leak. Yes, I do this for a living.

@bradpittless837 2 жыл бұрын

👍

@deadmanswife3625 2 жыл бұрын

Happy Thanksgiving Bob. 🦃🦃🦃❤🍗🥧☕

@BobsPlumbingVideos 2 жыл бұрын

Same to you Wendy 🦃

@deadmanswife3625 2 жыл бұрын

@@BobsPlumbingVideos thanks Bob

@mikev.1034 2 жыл бұрын

👍👍

@GlenS123 2 жыл бұрын

Pro-Press is not better, just faster.

@vanilla50 2 жыл бұрын

Thanks for this video Bob! I found the product on Amaz, but wanted to let you know your 2nd flange product, 43539 is not an active Amazon link for me. Im a DIYer, still contemplating whether to try the solder method or one of these, I will need to see condition of the lead once I have things cleaned up.

@BobsPlumbingVideos 2 жыл бұрын

Thanks for the info!

@ELMohel 2 жыл бұрын

👍💪

@yosefyaffee5912 2 жыл бұрын

Hi Bob, all ur videos r amazing! What r better; cast iron or pvc toilet flanges? Thank you

@BobsPlumbingVideos 2 жыл бұрын

I prefer cast iron. but you have to be able to adapt to the job at hand. If you can secure the P.V.C. flange to the subfloor, I don't see any issues.

@richardpalmieri842 Жыл бұрын

Great video!!!, had to pause and make this comment once you mentioned the bowl isn’t gonna move unless you have gorillas banging around on it 😂

@jmaverick9 Жыл бұрын

Great video Bob. This is exactly what I was looking for. If the lead from the pipe protrudes above the floor and wrapped over the old flange, do you cut it off so it is flush with the finish floor? Thank you!

@BobsPlumbingVideos Жыл бұрын

I do, if it's in decent shape I'll cut it flush and I use mainly the version with the three allen key tensioners.

@michaelnovelli2733 2 ай бұрын

On that lead bend you showed in the beginning is that side inlet with the male adapter a vent or is it used for another waste to drain into it ?

@BobsPlumbingVideos 2 ай бұрын

Back in those days it was generally used as a drain for the basin and bathtub. Thanks for stopping by, much appreciated!

@kylehughes6324 Жыл бұрын

I would have never even considered using these on a lead bend most of the ones i come across are so old they aren't viable anymore so we replace and if they are viable we re do it but for instance we had one in a slab that we just broke up the concrete and went to the cast iron and brought it all back up with pvc. Seeing this first might have changed that but it seemed rather unviable the building was from 1935 not sure how long the lead bend was in place. Thanks for the content.

@BobsPlumbingVideos Жыл бұрын

Thanks for checking out the video, I would opt to replace first, if the customer can't afford that option this could be a good alternative.

@fort3463 2 жыл бұрын

Bob I need to know how to install a kitchen sink basket. It always leaks in about a month.

@BobsPlumbingVideos 2 жыл бұрын

Check out this video, it may help...kzfaq.info/get/bejne/Z69mnLF-mNbYnIU.html

@michaelschopf2892 2 жыл бұрын

@BobsPlumbingVideos - Thanks so much for this video! I'm replacing a toilet and ran into this exact scenario with needing to install a new flange onto an old lead drain pipe. I saw a video about the second type of Oatey flange (with the three allen bolts to secure it), but wasn't sure if it would work on lead pipe. It seems to be intended for cast iron, so I wasn't sure if lead would be too flexible to get a good seal when you tighten the bolts. From the video it looks like that shouldn't be a problem, but I was wondering if you've run into any issues with that since you started using these.

@BobsPlumbingVideos 2 жыл бұрын

The key is to secure the flange to the floor. You can run the Allen keys up snugly (don't go bat shit crazy with them), then secure the flange to the subfloor. You'll be good to go, use a waters base silicone caulk around the bowl (Phenoseal or The Big Stretch) which will keep the bowl still once it sets.

@michaelschopf2892 2 жыл бұрын

@@BobsPlumbingVideos Thank you, sir. I really appreciate it. This is going to save me a bunch of time and effort.

@MooseDoesStuff Ай бұрын

you ever seen a lead pipe that has been expanded before the floor? it's like 1-2" wider between the floor and the main drain.

@BobsPlumbingVideos Ай бұрын

Not often, but yes.

@MooseDoesStuff Ай бұрын

@@BobsPlumbingVideos what do you do with that?

@bobbywenger5595 2 жыл бұрын

👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

@BryanW0765 Жыл бұрын

Thanks Bob. Perfect timing as I’m replacing a flange now. Cast iron pipe. When the pipes were originally installed in 1969, the pipe is not straight, so I cannot use one of the in-the-pipe flanges (the flange will not sit even in the floor). I found a flange that has a rubber seal that tightens to the outside of the pipe. What are your thoughts on that style? Will it work or not? Thank you and thanks for the content!!

@BobsPlumbingVideos Жыл бұрын

There is no one answer for all situations, I say "whatever works" for a particular job. If if gets the job done and it holds water, go for it!

@kirkday9322 2 жыл бұрын

Great video! I am helping my daughter with her first house. The lead bend is only about 2 3/4 inches inner diameter. Is there a product for a lead pipe this size? Thanks so much!

@BobsPlumbingVideos 2 жыл бұрын

Not that I know of, a 3" O.D. lead bend is the smallest I've ever seen!

@ssongnul1 Жыл бұрын

Thanks for the video. Just wondering whether lead pipe is strong enough to form water tight seal. Isn’t lead too soft for twist&seal?

@BobsPlumbingVideos Жыл бұрын

True statements, but in the service and repair world if you can SECURELY fasten the floor flange to the sub-floor it'll be fine. If there was a stoppage downstream of the bowl itself, in theory you might have an issue. (rare instance). It there is a stoppage in the bowl, not an issue. FYI most of the time I use the flange with the three allen nuts to tighten things up.

@DabblelyDiddly Жыл бұрын

ive had the 3 allen key flange on my basement toilet now for the last 3yrs. still doing fine. all thats holding it are the 3 stainless bolts and the weight.. it hasn't had a single issue.

@michaeljones3765 Жыл бұрын

I removed the old lead to use one of these...the pipe has a bend and they will not go inside the pipe far enough. I even ground down the uneven pipe to fit flush to the bathroom tile floor. Not only will it not go in more than halfway, it winds up being crooked, 2 inches from the tiles.

@BobsPlumbingVideos Жыл бұрын

Did you measure from the floor to the bottom of the bend and compare it to the length of the flange before attempting this ?

@wyattsdad8561 Жыл бұрын

Can you use those type of flanges on a pvc pipe? Or just cast iron? Great video btw. Thank you for producing it.

@BobsPlumbingVideos Жыл бұрын

Absolutely, but If I have P.V.C. waste piping I'm probably going to use primer and glue with the appropriate flange.

@wyattsdad8561 Жыл бұрын

@@BobsPlumbingVideos okay that’s good for me to know. Thank you

@viggs74 Жыл бұрын

Thanks for the video. One question though. You say the lip of the twist and lock flange should sit on top of the tile. That lip is 1/2” thick. Every where I read is that the flange should be 1/4” above the floor. I’m not sure what to do.

@BobsPlumbingVideos Жыл бұрын

It'll be fine, just make sure it sits flush & Level to the floor. Standard wax gasket and you'll be good to go.

@carriebrooks1877 2 жыл бұрын

Hello Bob, I have a question for you. If I have a lead sleeve into a cast iron pipe, is it ok for me to use either of these flanges? If so is there no need for a wax ring?

@BobsPlumbingVideos 2 жыл бұрын

If the lead is in sound shape, you can you either, i prefer the one with the allen screws. You still must use a wax seal with either.

@carriebrooks1877 2 жыл бұрын

Thank you SO much for responding!! 😊

@thomasstorey3544 Жыл бұрын

BOB..REALLY IMPRESSED WITH YOUR KNOW HOW... MY CAST IRON PIPE HAS A LEAD LIP THAT SLIGHTLY DROOPS OVER THE EDGE NOT SURE WHAT THE FIX IS..CAN U SHED SOME LIGHT FOR ME ?... MANY THANKS TOM

@BobsPlumbingVideos Жыл бұрын

I used the one with the three bolts yesterday 1/19/2023 on an old 4" lead bend, secured it with stainless steel screws and anchors into the tile floor. Tightened the three bolts (FIRST) set the the bowl and was off to races leak free.

@thomasstorey3544 Жыл бұрын

@@BobsPlumbingVideos does the rounded lip lay flat on the sub floor?

@alphasaur Жыл бұрын

do you have to make sure the inside of the lead pipe/drain is clean?

@BobsPlumbingVideos Жыл бұрын

I use a putty knife to remove any build up, then use a Scotch-Brite pad to smooth off the the interior of the lead.

@cliffordkurland556 Жыл бұрын

Does the old flange have to be cut off, thanks cliff K

@BobsPlumbingVideos Жыл бұрын

I wouldn't, but if it's a thin brass flange you can try to lay it right over. I wouldn't want to be more than 1/4" / 3/8" above the finished floor.

@dttub 2 жыл бұрын

Hello Bob. I have an old cast iron flange, can I put this plastic flange on the top of old cast iron flange without removing it? Thanks.

@BobsPlumbingVideos 2 жыл бұрын

I the cast iron flange is flush with the floor, I would give it a shot. If it's above the floor, it'll end up being to high.

@dttub 2 жыл бұрын

@@BobsPlumbingVideos . So it is easier for me now, my flange is flush with the floor. Thanks a lot.

@neilsolano8874 Жыл бұрын

Ive searched everywhere and can’t find the type of screws that are needed to to screw the twist flange. The holes are huge! What size screws do I need because standard wood screws just goes right through

@BobsPlumbingVideos Жыл бұрын

What type of material are you securing to? Cement, Wood, Concrete? You can use these for concrete with a stainless steel washer to fit the screw and not pass thru the hole in the flange. amzn.to/3iwQ1V4. Or if going into wood use a stainless steel #12. #10 wood screw with stainless steel washers.

@wyattsdad8561 Жыл бұрын

The one with the allen heads seems like toilet paper and crud will catch on it. It also looks like it makes she sh!tter pipe kinda small? Or is it okay?

@BobsPlumbingVideos Жыл бұрын

Check the inside opening of the horn of the actual toilet. About 2 3/8" on most, It'll be fine.

@wyattsdad8561 Жыл бұрын

@@BobsPlumbingVideos okay 👌 Thank you for answering that question because I’ve always wondered about that. Sometimes my kid will have a pretty large poop and for some reason I envision it getting caught on some of those areas where the stainless Allen screws are located. 😃

@jimmurphy1326 2 жыл бұрын

Hi Bob, I have a lead bend that protrudes through the floor on a bit of an angle, by design it appears. the flange has been removed . I plan to cut the protruding lead to the near to the surface of my subfloor such that the new flange will end up flush with the surface of the plank flooring I plan to install. I plan to use one of the PVC flanges mentioned in the video but I'm concerned I may end up with a flange that is not totally flat to the floor surface due to the slight angle. Have you ever seen such a condition? Thanks so much for the info. Jim Murphy

@BobsPlumbingVideos 2 жыл бұрын

When I solder brass flanges onto the lead I can match it to the contour of the floor. With the ones in the video you're going to be limited, to the slope of the floor. You'll most likely be high in one end, but if it's not at an extreme angle, using extra thick wax gasket should make up the difference.

@jimmurphy1326 2 жыл бұрын

@@BobsPlumbingVideos Will do, thanks very much..

@wyattsdad8561 Жыл бұрын

What if you were to use a grinder and grind down the high sides?

@bigdaddy4975 Жыл бұрын

I meant 4 inch to 3 inch still it reduces the size of the pipe

@dougpenrod8867 2 жыл бұрын

You know that a nice demo but you should show it actually on the floor and show how to tighten up then

@andrenascimento2475 Жыл бұрын

Can it be used on 3” copper pipe?

@BobsPlumbingVideos Жыл бұрын

No, 4" cast iron, P.V.C. or Lead.

@TedTedness-wu4vb 4 ай бұрын

I would not use one of the plastic screw in as it has WAY too much of a toilet paper ledge to hang up on . CLOG City.

@jcaleca60 2 жыл бұрын

Bob you forgot to mention that most toilets today a 12-inch rough you should tell the people from the back finish wall to the center of the journey Bolt coming through the toilet floor flange to the back wall to be 12 in when I work with my father God Rest his soul the old toilets 10 inches even 14 in put today everything is a 12-inch Ruffin just thought I'd throw this in here Happy Thanksgiving

@BobsPlumbingVideos 2 жыл бұрын

Good point! Happy Thanksgiving 🦃

@jcaleca60 2 жыл бұрын

@@BobsPlumbingVideos with all this new Plumbing my father must be rolling around in the grave by the way my father was in WWII my whole family of veterans my dad got a bronze star purple heart he was a combat medic Americal Division in the Pacific so when Vietnam came around he said to me and my brother what are you guys waiting for but it was a different War WWII we had to fight

@eddyhmmk1 Жыл бұрын

Always been a bit scared using this on lead. Cause it’s so malleable…

@jcaleca60 3 ай бұрын

Bob why don't you make a video showing the guys how to remove the old flange from the lead Bend😊 keep the windows open when you're using a torch on the lead when removing the b r a s s toilet flange did a lot of those they made Plumbing easier today as far as the ProPress how long is that o-ring going to last I think a solder joint will last a lot longer what's your opinion😊 funny before 1986 we did a lot of domestic water what's 50/50 now everything Soldier free what did houses in the early nineteen 70s still going no one ever got sick the safety standards are better today but New York City water I'm in Staten Island Brooklyn other boroughs there are lead joints on City water mains

@BobsPlumbingVideos 3 ай бұрын

If I did that and someone set their home on fire, guess who's gonna get blamed! LOL! How are you finding business? After those pro press "O" rings fail, there's going to be plenty of business, unfortunately I won't be around.

@jcaleca60 3 ай бұрын

@@BobsPlumbingVideos Neither will I 🤣 😂 🤣 thats life taking my lipitor every night Try stay healthy been on it for 25 years.

@jcaleca60 3 ай бұрын

@BobsPlumbingVideos you right no fire 🔥 somethings leave out smart . I had back operation lumbar laminectomy can not do much anymore. The brain said yes, and the body said no .🤣

@kennylavay8492 10 ай бұрын

PVC toilet flange yes. Pro press, shark bite hell no. If you can not sweat you are not plumbing.

@user-lr4ht1uw1z 4 ай бұрын

People getting mad that a better product came out that allows homeowners to do plumbing easily and not have to pay plumbers an absurd amount of money to sweat some fittings. I can sweat but I always use shark bites. Never had an issue and never wasted money on an overpriced plumber.

@johnoliver9885 Жыл бұрын

I just picked up the same Oakley screw in twist and guess what the rubber gasket was only half the thickness as yours which means half the thread thickness and probably half the effectiveness. Fuck’n companies always looking to save a buck and at the same time charge more bucks!

@BobsPlumbingVideos Жыл бұрын

I'd take the dam thing back!!

@johnoliver9885 Жыл бұрын

@@BobsPlumbingVideos I did, and used an internal flange instead.

@ozzstars_cars Жыл бұрын

I don't care for those DIY flanges because they restrict the drain opening. Anyone who drops a huge deuce in the toilet good luck getting that log to flush down the pipe.

@BobsPlumbingVideos Жыл бұрын

The integral traps in most toilets is less than 3" in diameter. I haven't experienced any issues so far.

@bigdaddy4975 Жыл бұрын

The problem is you go from a 3 inch toilet hole to a 2 inch toilet hole. Get ready for a bunch of toilet stoppages

@BobsPlumbingVideos Жыл бұрын

Ever take a peak at the bottom of the bowl? That hole is about 2 3/8".

@bigdaddy4975 Жыл бұрын

@@BobsPlumbingVideos yeah I know but one hole isn’t two holes the more restrictions the more problems I own some rental properties and I’ve used these a lot I’ve had nothing but problems from them so this isn’t a quince