Repairing a henry with (almost) full motor disassembly, motor was gummed up with stinky goo!

Рет қаралды 10,594

4 жыл бұрын

If you found this video helpful you might like to:
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co.uk/shop/bootsowen
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program (links below) and I may receive a commission for the sale. :
Henry vacuum cleaner: amzn.to/2RbpoUs
Henry filters: amzn.to/2FiMupy
Henry Bags: amzn.to/32dlcK6
or you can buy anything else through the link. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 22

@TheHenryCollectorExtra 2 жыл бұрын

My dads work had a Henry HVR200-22 exactly like this, had no problems but it’s now in a council building as that’s where it came from. They also had a fleet of HVR200As.

@eswainz

Followed along with your video perfectly and fixed my Henry! All in under an hour. There was lots of dust and corrosion inside. Sanded off all the connections just for safe measure but one of the brushes was seized. Loosened it up and cleaned out some of the caked on dust covering all the components. Works like a charm now!! Thanks my dude 🙏😌

@Jotdotcom Жыл бұрын

I love that you left in checking the disconnected switch 😂 Super helpful video, thank you.

@miralihosseini9625

But but but but…

@deluxehotpoint 4 жыл бұрын

I took apart one of these motors the other day as the bearings were shot...was a bit of a nightmare but now I've done it once I feel like I'll be more of a pro next time if needs be! Oiled the bearings and put back together and now sounding better than it used to

@cirebyte7588 Жыл бұрын

Thanks for the video, just fixed my henry tonight after watching this.

@hellothereknownasunknownus6535 4 жыл бұрын

The previous owner has definitely sucked up water if there is corrosion and the rusted fancase you should take the motor out of the bypassed Henry because this ones pcb still works the Henry’s with the hi lo switch had reliable pcb’s in them

@nigelbailey5892 Жыл бұрын

Thanks for the video, mines a different model but has horrible bearing problems. I guess the rattle is from the missing washer between the first impeller and the tube standoff (@27.38) that didn't go back in!

@NumaticHenryLover 3 жыл бұрын

Well! Without the big scraping sound the motor would’ve sounded fine!!

@MieleW2573 4 жыл бұрын

My mom always used to buy those air freshners for vacuums. Its a power stuff inside a cotton bag. It feels really really greasy. Maybe the previous owner of this vac alsu used them. I think that those freshers caused the sticky gunk inside the motor. As the oil from the fresher gets throughout the vac and dust sticks to it

@abir.chowdhury 4 жыл бұрын

Just nick the motor from the henry that had the circuit board bypass, they use the same motor and this is better off lol, it's a more desirable type of modern henry