BORETECH RIMFIRE BLEND CLEANER IS IT THE BEST???:22lr Cleaning process Anschutz 64MPR

Рет қаралды 18,801

3 жыл бұрын

My process on how I clean my 22lrs Boretech Rimfire Blend is the best stuff I have found that cleans my 22lr try it out you won't be disappointed!!!!
Also guys I'm giving away a box of ELEY MATCH and the way to enter
1) Comment on this video what cleaner your using
2) Subscribe to the Channel
3) Like our Facebook Page @304 Rimfire
its that easy so you can stay tuned for our monthly giveaways which we will be going live on Facebook with the names in a randomizer to pick the winner so just Follow the steps above and get entered now before you miss out!!! Thanks for watching and have a great day

Пікірлер: 46

@bobturner5124 3 жыл бұрын

Finding your videos addictive,keep up the good work, your caring for the shooting community is showing!

@vickhinton6608 2 жыл бұрын

I have just purchased an older model but new 1416 Varminter. 18 inch threaded barrel , so for your video to have popped up is a gods send , THANK YOU SIR for your knowledge. This will help keep my shooter in good condition.

@deniscleaver7544 3 жыл бұрын

Again, excellent video displaying methods for through cleaning of .22LR target rifles. Thanks loads. Bore Tech, top quality.

@304rimfire5 3 жыл бұрын

Thanks

@70willard 3 жыл бұрын

Man hats off to you and your vids . I follow religiously. For a younger guy your have a lot of knowledge.thank you

@304rimfire5 3 жыл бұрын

Thanks I'm trying I have only been in the rimfire for a year and have done lost of testing before the KZfaq channel to see what work and what not works. So I figure I should share what I know so people don't waste a lot of time and money and can get to shooting.

@lucabrasi5070 3 жыл бұрын

That is just one damn nice rifle. On my wish list.

@juliusjames5577 3 жыл бұрын

I clean the chamber with a chamber brush and then dry patch every 124 rounds. The bore only gets touch when the rifle tells me it wants it (about 500 rounds). I used to clean .22lr barrels after every use. That practice was killing accuracy.

@304rimfire5 3 жыл бұрын

Yea I noticed that with mine once it starts shooting bad she wants cleaned. then after clean it take around 50rds before is start getting consistent again.

@dave4344 Жыл бұрын

I also use Boretech Rimfire Blend. I use two Myers’s custom 20 caliber rods and a bore guide. My procedure is, 3 wet patches, followed by a five stoke brushing with a brass brush, followed by two wer patches and three dry patches.. I do not put an oily patch because I shoot my rifles every week.. Boretech is absolutely the best I have ever used,,

@7come11two 3 жыл бұрын

That's much the way I clean my .22s.

@bullseyedixon5660 Жыл бұрын

great vid thanks

@jorgerodriguez-wv4ul 2 жыл бұрын

Thank u. Hoppes is OK. It works but to get the carbon loose I need 2 let it soak for too long.

@garylozowski1419 3 жыл бұрын

Thank you for another great video ! Do you prefer lead or copper plated bullets ? Would the cleaning process differ if one or the other shot better in my rifle ? These days it seems you have to shoot what you can find.

@304rimfire5 3 жыл бұрын

I shoot nothing but lead bullet never shot anything copper out of these to rifles

@tsilkiner1 3 жыл бұрын

I have been watching your videos lately, like the way shoot. I was wondering if you could tell me whose Bore Guide you are using? I had a CZ 455 and had a Bore Guide but the extractor which the guide didn't protect the rod, causing the coating to be peeled away. Looking at the MTR or Varmint to purchase once inventory comes back to normal. Thank you for the help!

@304rimfire5 3 жыл бұрын

I use the bore tech guide rod. Yes I just ordered another gun for the channel hope it will be here this week so I get it all done and ready for some videos. Weather is getting nicer where I live the snow is melting temperature are riding and bullets will be flying here soon.

@sekaf4125 3 жыл бұрын

Thank you. Well done. You don’t use a light oil inside of barrel?

@304rimfire5 3 жыл бұрын

Yea I use oil after i clean it and know the rifle is going to sit

@xenomorph1317 2 жыл бұрын

I just use white spirit

@RimfireAddicted70 2 жыл бұрын

I won't say cleaning a rimfire barrel is wrong, I will say for those who do clean the how and when is going to be greatly determined by ammo selection and quality if the bore. The one thing I will say is you NEVER push a brush out and let it touch the crown. This isn't a personal opinion, you can read this from several barrel makers for rimfire and center-fire. The crown can and will change from brushing.

@304rimfire5 2 жыл бұрын

I do it every time and still shoot perfect cards. Not saying your wrong but I have shoot over 10,000 rounds this season and I clean my rifle after card so 70 times and have not had a problem yet with the brush being pushed out messing the crown up. Just because someone says not to do it doesn’t mean it will hurt it until you try and I’m not about to quit because what ever I’m doing is working. Reason why I do that is because I watch what the top shooters are doing and there doing the same thing and some are a lot harsher when they clean there rifle then me. I appreciate your comment but you can’t believe everything you read.

@RimfireAddicted70 2 жыл бұрын

@@304rimfire5 Shooting and all aspects of it from how, what to use, technique ...etc are all changing as we become more and more technologically advanced. Weapon development and components have changed light years in the last decade and are changing ever faster. The old school methods or rules are hard to break but slowly with more critical testing new methods are coming to light. Shooters the older they are will be slower to change where newer less seasoned shooters will adapt quick because habits are less ingrained. I know myself I had to see to believe some of my long held rules needed to change as I tried new methods that worked despite my doubts. Imagine what we will learn in 5-10 yrs from now.

@304rimfire5 2 жыл бұрын

@@RimfireAddicted70 Very True

@StuninRub 2 жыл бұрын

Nonsense, no amount of brushing from a bronze / brass brush will change steel.

@donaldanderson4139 Жыл бұрын

Be sure to wipe any residue on the muzzle end away.

@syoung6126 Жыл бұрын

Good stuff BoreTech

@donrumato3413 3 жыл бұрын

I also have wonderful 64 MPR. I can't find bore guide that suits. What BORE GUIDE do you use? - Thank you!

@304rimfire5 3 жыл бұрын

I ordered mine from North America Anachutz the aluminum version.

@donrumato3413 3 жыл бұрын

@@304rimfire5 Thank You, I wish you a Merry Cristmas and a Hsppy New Year !

@304rimfire5 3 жыл бұрын

You too Don wish you a merry Christmas and a Happy New year I have more video coming out soon with diffrent lots of ammo so stick around to watch them and thanks again.

@methodical_66 2 жыл бұрын

Can I ask why you use a .20 on a 22lr barrel? Also is your cleaning rod a .20 or .22 lr?

@304rimfire5 2 жыл бұрын

Reason to use a smaller rod is because I don’t want the rod to touch the inside diameter of the barrel. Some cleaning rods say there .22cal on them but the rod is bigger in diameter and is hard to push down the barrel. So with the smaller diameter rod you eliminate the rod touching the inside of the barrel to cause any damage.

@josephstanczak4340 2 жыл бұрын

,20cal jag? what size patches do you use then for a .22lr?

@304rimfire5 2 жыл бұрын

I use 1inch round cleaning patches

@garymeyer3294 3 жыл бұрын

Why are you using a J. DEWEY rod for your patches and a BORETECH rod for your brushes? I used to use J. DEWEY rods but now use BORETECH. I recognize both by their handles.

@304rimfire5 3 жыл бұрын

Your right I have a Boretech and a Dewey rods. No reason for using the Dewey over a Boretech the Dewey is a 20cal rod and the boretech is a 22cal rod. I wanted to try a Boretech so that is why I'm using it and to be honest I will be using the Boretech over the Dewey's.

@donrumato3413 3 жыл бұрын

Is it amusing ? I live on the other side of planet Earth, have same Anshutz, use same PROTECTOR support tor the butt, same Caldwell Rock RB for the front, also have Boretech chemistry and rod. Globalisation as it is !

@304rimfire5 3 жыл бұрын

That is awesome and crazy I’m from the USA and your miles away matching the same setup as me.

@kdrods3641 3 жыл бұрын

What kind and size rods you use?

@304rimfire5 3 жыл бұрын

Those are 40-44 inch I need to order 48inch long rods. Those rods work great for my CZ 457mtr but a little short for my Anschutz. The rods are made By Boretech also I use 1) rod is a .20cal and .20cal jag setup 2)Rod is a 22rimfire by bore tech and i use there .22lr nylon brush