Building the Stud Wall Frames. Owner Builder Series Ep 16:

Рет қаралды 51,273

9 жыл бұрын

#studwall #ownerbuilder #diyforknuckleheads
diyforknuckleheads.com Building Stud Walls. G’day Knuckleheads, Uncle Knackers here. In this Episode we look at making, and standing up the stud wall frames. How to build a stud wall frame is pretty straight forward but it is handy to know a few basic principles before you get stuck into it! Check it out!
Before l go on...
DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SUBSCRIBE to DIY For Knuckleheads and never miss a video again!
/ shaneconlan1
-------------
Tools l Use: diyforknuckleheads.com/tools-...
-------------
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell,
NSW, 2452
Australia.
-------------
Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessorie Store!
shop.spreadshirt.com.au/DIYFo...
------------
Check us out on Facebook;
/ diyforknuckleheads
------------
ATTENTION!!
Don’t Miss Out on ALL the other Good Stuff!
Click on the Link below for the Playlist containing all the HELPFUL, INFORMATION PACKED Videos in My Owner Builder Series.
• Permits and the Owner ...
Music supplied by Jason Shaw at www.audionautix.com
Released under Creative Commons License 3.0.
Music Title: Banjo Short
incompetech.com/music/royalty-...
Kevin McLeod: Feelin Good.
Have a great day and l’ll see you again real soon. ☺
Cheers,
Uncle Knackers
Please Note:
All Videos produced by shaneconlan1's KZfaq Channel are provided for informational purposes only.
All the content provided is for general guidance only. Because tools, products, materials, equipment, techniques, building codes and local regulations are constantly changing, shaneconlan1 ( Shane Conlan) cannot, and does not assume any responsibility or liability for the accuracy of the information contained therein. Further, shaneconlan1 (Shane Conlan) will not accept any claim for liability related to, but not limited to, omissions, errors, injury, damage or the outcome of any project. It is the responsibility of the viewer to ensure compliance with all applicable laws, rules, codes and regulations for a project. The viewer must always take proper safety precautions and exercise caution when taking on any project. If there are any questions or doubt in regards to the element of a project, please consult with a licensed professional.

Пікірлер: 170

@northgork 3 жыл бұрын

Dad did a great gob. Well done.

@mediumdeli-squishis Ай бұрын

Brilliant mate, must have been thrilling seeing it all go up. Those Paslodes are beauties.

@diyforknuckleheads Ай бұрын

Yeah mate....very satisfying build. The good news is that it hasn't fallen down yet 😂 Thanks for watching 😁🇦🇺👍

@1984juant 9 жыл бұрын

Omg! You actually building the house by yourself . Amazing!

@diyforknuckleheads 9 жыл бұрын

tecnico Yeah mate l'm trying to do as much as possible myself. Our budget is really tight so it's kind of out of necessity. Cheers :-)

@mukeshpandya4171 9 жыл бұрын

Nice one going there.. Will wait to see how things gets done at the floor and final walls.. (Thumbs Up)

@allea89 9 жыл бұрын

Looking really good Shane, Thanks for sharing your experience and tips as you progress through the build, its been really good.

@diyforknuckleheads 9 жыл бұрын

allea89 Thanks for the comment Allea! Much appreciated :-)

@paullobwein1632 2 жыл бұрын

Just came across this video.. uncle knackers! I searched stud walls but didn’t expect a stud like ya self. 😀 Nah serious looked up building stud walls for the shed. Good video mate. Your young fella reminds me of my daughter who is 5. When I ask her did dad do a good job I get “nah!” Then a roar of laughter 😂😂

@diyforknuckleheads 2 жыл бұрын

😂....cheeky little buggers aren't they mate 😂....wouldn't change it for quids 👍 Thanks for watching Paul and good luck with the shed 👍😁🇦🇺

@paullobwein1632 2 жыл бұрын

@@diyforknuckleheads yeh mate me either love seeing them grow into the little person with their own personality 😂 cheers mate

@vkirisome4701 3 жыл бұрын

Absolutely love the video

@diyforknuckleheads 3 жыл бұрын

Cheers for that! Appreciate the comment 👍😁🇦🇺

@veronica5896 9 жыл бұрын

Love the progress =) Really enjoying to follow along, thanks for sharing =)

@diyforknuckleheads 9 жыл бұрын

Veronica Thanks Veronica :-)

@MrRedneckrc 9 жыл бұрын

Another great video Shane, it's coming along nicely. You will be done and moved in before you know it. Can't wait for the next video, keep up the good work.

@diyforknuckleheads 9 жыл бұрын

Larry Long Thanks Larry. Cheers mate

@stevecollins9450 9 жыл бұрын

Well done Shane!

@diyforknuckleheads 9 жыл бұрын

Steve Collins Thanks Steve.

@captainalaric 9 жыл бұрын

Loving the series so far Shane! Excellent :)

@diyforknuckleheads 9 жыл бұрын

+captainalaric Thanks mate

@mihumus 9 жыл бұрын

Great project, looking forward to see more about it!

@diyforknuckleheads 9 жыл бұрын

***** Thanks mate. Hope you can stick around for the rest of the series. Cheers

@mihumus 9 жыл бұрын

shaneconlan1 Sure! :)

@francesluck6597 8 жыл бұрын

You make that look easy. Your boy's a great kid by the way, loved the dialogue between you.

@diyforknuckleheads 8 жыл бұрын

Thanks Bruce. Yeah Billy's a great little kid. Glad you liked it. Cheers

@Feedback4Utoday 6 жыл бұрын

Outstanding!

@diyforknuckleheads 6 жыл бұрын

Glad you found it useful mate. Cheers 👍😁

@mcnabster 9 жыл бұрын

Brilliant Uncle Knackers.....

@diyforknuckleheads 9 жыл бұрын

Michael McNeill Glad you liked it Michael! Cheers mate :-)

@tonybaloney5385 8 жыл бұрын

Had me LOL with the Benny Hill comment. Thanks for the cool video! I greatly enjoy your work from way over here in California!

@diyforknuckleheads 8 жыл бұрын

Glad you liked it Tony :-)

@woodturningjohn 9 жыл бұрын

Always great to say you built it as well, my be a lot of hard work but you know where everything is and how it was done. Which will make a future repairs that much easier. Great work, no matter what the kids says :)

@diyforknuckleheads 9 жыл бұрын

woodturningjohn Spot on John! There is a great sense of satisfaction. Just have to make sure it doesn't fall down :-) Kids these days mate…..way to cheeky :-) Cheers

@MartyDaley 9 жыл бұрын

Brilliant!!!!!

@diyforknuckleheads 9 жыл бұрын

Marty Daley Cheers Marty :-)

@IdRatherMakeItMyself-Net 9 жыл бұрын

Good progress Shane! Its interesting watching this since there are slightly different requirements/codes for how you build the walls versus what I have to do here in the States. Fantastic series.

@diyforknuckleheads 9 жыл бұрын

Mark's Workshop Creations Thanks Mark! Yeah l thought there might be a few. Our climate is very different to yours which obviously alters things as well. Thanks for watching and for the comment. Cheers

@ippolitofred 9 жыл бұрын

Love the video. Billy did a great job.PS. You were pretty good also. You sure make it look easy. This has been an awesome series, thanks again Shane.

@diyforknuckleheads 9 жыл бұрын

Frederick Ippolito Thanks Fred. Much appreciated mate ;-)

@FuryVoxx77 6 жыл бұрын

Damn!!! This guy makes it look easy... Great job mate! :)

@diyforknuckleheads 6 жыл бұрын

Thanks mate...glad you found the vid useful. 👍😁

@billfromelma 9 жыл бұрын

Hey Shane, good looking boy, must look like his Mom! Awe just bustin your chops! He does have a winners name though. Man the way you were zooming around there someone might think you knew what your doing . Hey , those squaring straps are really neat. Beats letting in a long piece of 2x4 on angle.nice job keep up the great work, I'm enjoying the heck out of this series.

@diyforknuckleheads 9 жыл бұрын

billfromelma G'day Bill. Thanks for watching mate. Yeah he does take after his mother :-)……thankfully. Appreciate the comment mate. Cheers PS. You can't go wrong with a name like Bill.

@davanted.o.x4577 3 жыл бұрын

Resl awesome bud👍👍👍

@diyforknuckleheads 3 жыл бұрын

Thanks mate 👍👍🇦🇺😁

@alanpittman8700 9 жыл бұрын

another great vid shane it amazing the differences in way you do it and the codes you have to meet and how it is here in the states cheers mate

@diyforknuckleheads 9 жыл бұрын

alan pittman Thanks Alan. Yeah l was thinking that, it must be a lot different. It's good to see both sides. Cheers mate

@summerswoodworking 9 жыл бұрын

Looking good!

@diyforknuckleheads 9 жыл бұрын

Summers Woodworking Thanks Brian :-)

@summerswoodworking 9 жыл бұрын

Yeppers!

@TheLittleGardenShedWorkshop 9 жыл бұрын

excellent mate,

@diyforknuckleheads 9 жыл бұрын

The Little Garden Shed Workshop Thanks Harry

@FunkoJ 9 жыл бұрын

Hurry up and do some more work. I need more episodes to watch. I'm loving watching this build. You wouldn't be as happy if you were doing that build here in Ballarat. It's all mud Uncle Knacks.

@diyforknuckleheads 9 жыл бұрын

Scoots Guitar Mod Shop Hey Scoot, one of my best mates lives in the Rat and my brother is in Buninyong so l get the regular updates on how cold it's been down there. I did my apprenticeship at the School of Mines in Ballarat so l'm pretty familiar with the inclement conditions over winter :-) Hope you're rugged up mate and thanks for watching. Cheers

@FunkoJ 9 жыл бұрын

Wow it's such a small world. My whole family grew up in Buninyong and my folks are still there.

@diyforknuckleheads 9 жыл бұрын

Scoots Guitar Mod Shop Sure is mate :-)

@deanno7067 9 жыл бұрын

Great work knackers, you're a quality carpenter keep up the great work. All the best hope there are no unexpected dilemmas.......well if there are you could always ask billy he seems like he knows whats going on lol.

@diyforknuckleheads 9 жыл бұрын

+Dean no Thanks Dean. Yeah Billy's the brains behind the operation LOL . Thanks for watching mate

@chrisversteegen1368 9 жыл бұрын

@shaneconlan1 Lookin' good, Knackers! Loving the 10' ceilings, hope there's going to be some 9" colonial skirting to go with it haha. I'm a sucker for the old federation style second fixes. Eagerly awaiting the next episode!

@diyforknuckleheads 9 жыл бұрын

Chris Versteegen Thanks Chris. Yeah the 10 footers should be good. Cost a bit extra but l think it'll be worth it. Don't mind the Federation style either but there isn't to much of it around here. Might look a little out of place. Cheers mate

@OurBuild 8 жыл бұрын

Good on ya Billy, you crack that whip on Dad otherwise that house will never get done :)

@diyforknuckleheads 8 жыл бұрын

+Our Build He is a bit of a slave driver James….I'd hate to work for him full time :-) Cheers mate. PS..I hope the new site's going well

@CyberAutomate 9 жыл бұрын

first Benny hill reference I've heard in a KZfaq video Lol. well done.

@diyforknuckleheads 9 жыл бұрын

David Hall Thanks David….l couldn't resist :-)

@grumpy_poo 9 жыл бұрын

Little Billy ,only four, Nailed his Father to a door. Said his mother feeling faint..... Billy darling... Mind the paint!!!....... :D

@diyforknuckleheads 9 жыл бұрын

grumpy poo Hahahahha, Classic mate :-)

@PuffsDragon 9 жыл бұрын

Coming together and starting to look like a house.. I'm interested to see how those metal strip braces work and adjust. I have never seen them before. good job there!

@diyforknuckleheads 9 жыл бұрын

Michael Puffenbarger Thanks Michael. The tensioners are very simple to operate. Just tighten, or loosen them to whichever way you want the wall to go to make it plumb. Once you get that, you tension all four and then nail the brace off. Cheers

@PuffsDragon 9 жыл бұрын

ah ok they are a good idea. thanks.

@HaslamCorp 9 жыл бұрын

Nice high ceilings will be great. Good Stuff.

@diyforknuckleheads 9 жыл бұрын

HaslamCorp Thanks HaslamCorp. Yeah the 10 footers should give plenty of light to the space. Cheers mate

@TheNorma 9 жыл бұрын

Very helpful. I want to put in a few extra closets.

@diyforknuckleheads 9 жыл бұрын

Norma Jean Clark Thanks Norma. I hope your closet project goes well. Cheers

@TheNorma 9 жыл бұрын

shaneconlan1 Thanks

@wtabilltaw 4 жыл бұрын

You showed the softer dad side , cool to see the real you mate 👍

@diyforknuckleheads 4 жыл бұрын

Cheers mate....glad you enjoyed it. He's a great little fella....wouldn't know what to do without him. Thanks for watching 👍😁🇦🇺

@wtabilltaw 4 жыл бұрын

DIYForKnuckleheads I’m in uk and still in lockdown although it is easing here a bit . Your videos are the only thing that’s kept me sane 🤪 well almost , I have almost watched all of them now . My ears pricked up when you called him Billy because I’m a Bill myself . Thanks for helping me get through this horrible time , I live alone so it’s been like having a happy friend here with me . Look forward to all the new stuff . Best wishes .. Bill in uk

@jamesblanton9364 9 жыл бұрын

Another awesome job uncle knackers. Also i've not noticed this before Shane, but you're a bit of a machine mate, you were working super fast, i haven't ever seen anybody ever move that quickly before, go you. Jokes aside, thanks for a ripper ep, cheers

@diyforknuckleheads 9 жыл бұрын

James Blanton Thanks James. Must have been the extra breakfast l had:-) Cheers mate

@MartyDaley 9 жыл бұрын

I would greatly appreciate it if you could do a tutorial on how to use a nail gun. Both for framing but also for small woodworking jobs. Massive fan Shane. Cheers - Marty

@diyforknuckleheads 9 жыл бұрын

Marty Daley As per usual Marty…thanks for your encouraging comments! I've thought about doing that. I'll put it on my to do list. Because l use them a lot l kind of consider it second nature. They probably are pretty confronting to those that haven't used one before. Thanks for the suggestion. Cheers mate

@WoodworkingBrewer 9 жыл бұрын

Going well there Shane, I did wonder though why you needed a hammer when you were using the nailgun but you started to show the old faithful hammer halfway through the video. We can all see now that its starting to look like a house now, can`t wait for the next episode.. see you then mate.

@diyforknuckleheads 9 жыл бұрын

Rusty Dawg Ales Cheers Rusty! The old hammer has seen better days :-) Thanks for watching mate!

@andressalas4266 9 жыл бұрын

Good one uncle K! Once the walls are attached and squared up with each other, do you then remove the metal tensioners? Loving the series! Can't wait to come over for a cup of tea when it's all done! Looks like there's going to be a lovely guest room!! 😭😜. Cheers matey!

@diyforknuckleheads 9 жыл бұрын

Andres Salas Thanks Andres!. No mate the metal braces and tensioners remain. On the internal walls you plane a tiny bit out of where the the braces are going which enables them to sit just below the surface so that they don't get in the way of any drywall. Yeah the guest room will be a beauty and hopefully there'll be plenty of guests to utilise it. Cheers mate :-)

@chadboy6276 9 жыл бұрын

lol. I have a very old hammer too. as long it will do the job its perfect!

@diyforknuckleheads 9 жыл бұрын

chad saleh That's right Chad…it doesn't need top be fancy :-) Cheers mate

@xIRATUMx 9 жыл бұрын

Shane awesome videos mate, watching from the UK here. Is that a brad nailer you use in your videos or something bigger ??? Also more pallet videos be awesome. Keep up the good work.

@diyforknuckleheads 9 жыл бұрын

xIRATUMx Thanks xIRATUMx. I'm using a 3 inch framing gun in this video. I use a 16 gauge bradder in all my pallet videos. Appreciate the comment mate. Cheers :-)

@timstreets8105 8 жыл бұрын

shame my son in law didn't watch this before doing his internal stud wall. He worked from both sides in to the doorway in the middle, ended up being 12mm too narrow for the door, and not even square! Had offered my help, with all your on line tips I took on board, but was told "I can manage ". Since then he's watched all your home build series!

@diyforknuckleheads 8 жыл бұрын

+tim streets Hahahaha… Oh well lesson learnt l suppose Tim. Thanks for watching mate and don't forget to tell your friends. Cheers mate

@bafman 5 жыл бұрын

lol. Benny Hill movie. Showing your age there Knackers!

@diyforknuckleheads 5 жыл бұрын

Hahahhahahha...gotta love the old Bennymeister Brett😂😂....and yes mate, l am showing my age as are you by the comment 😂😂 Have a good one and thanks for watching 👍👍😁

@RJJFavorites 9 жыл бұрын

Great vid. Thanks. When you say crowns all either up or down. What do you mean by crowns? Is this the way the timber is warped?

@diyforknuckleheads 9 жыл бұрын

+RJJFavorites G'day mate. The crown referes to the way that the timber is bent. Not sideways bent but up and down bent. Think of a banana or a bridge. When the bow is facing up it means that the crown is facing up. When the bow is facing down, it means that the crown is facing down. Just make sure that all the studs on the one wall are all either crowning up or crowning down. Hope that makes sense. Cheers

@cn89949 4 жыл бұрын

Great video! What type of nails you would use for these stud frames?

@diyforknuckleheads 4 жыл бұрын

Thanks mate. The nails l use are 3 inch framing nails that match the gun that l;'m using. If nailing boy hand just use a 3 inch bullet head nail. Good luck 👍😁🇦🇺

@maartenhappel9014 9 жыл бұрын

kids are honest. Even after several takes :-)

@diyforknuckleheads 9 жыл бұрын

Maarten Happel Yeah l know! As they say Maarten, never work with kids or animals. :-)

@trav17n 2 ай бұрын

What was the cost difference between making your own frames verse having them premade

@brothyr 9 жыл бұрын

A roll of Bicycle Handle bar wrap will do that hammer good.

@diyforknuckleheads 9 жыл бұрын

Adam R Good tip Adam. Might give that a crack

@donr868 8 жыл бұрын

For us novices would have been good to see how you are fastening the walls together at the sides, corners and top. As well as bolting to the slab. Good work though!

@diyforknuckleheads 8 жыл бұрын

+Donald Rowe G'day Donald. I wanted to do an indepth series on the whole framing thing but time just didn't allow for it. Thanks for watching. Cheers. PS. If you have any questions just shoot me a message.

@bartbug1 2 жыл бұрын

Gday mate, another random quesiton: do you crown your studs for external walls out or in regarding your final finish (aka wearther boards) whats the best thing to do regarding that?

@diyforknuckleheads 2 жыл бұрын

Mate, most external walls have braces fitted so have the crowns on the inside. That way if you need to plane a crown to get that stud straight you won't have a metal brace to contend with....hope that makes sense. Cheers 👍😁🇦🇺

@bartbug1 4 жыл бұрын

Shane could you tell me why that larger window header goes in? Is it because it's a bigger window frame? Thsnks

@diyforknuckleheads 4 жыл бұрын

Yeah spot on mate.

@anthonygreen9609 4 жыл бұрын

How would join lengths of timbers to make the top and bottom run if one didn't have the full uncut lengths? This is important to me as my timber lengths for my shed are not long enough and I am looking to affix them with bracing straps but I am not sure if this is the safest or best method. Thanks.

@diyforknuckleheads 4 жыл бұрын

Anthony, l'm assuming you are talking about the top plate and the bottom plate?? The bottom plates jut butt together and you just need to bolt them down to the concrete slab. With the top plate, butt the two lengths together making sure that the ends on both pieces has a stud directly underneath. Stand both frames up and nail the studs together. On the very top of the wall, use a 'Gang Nail Plate' and hammer in place. Another method is to poison the studs about 500mm in from each end......stand the walls up and then nail in a cleat underneath the top plate that runs from one stud to the next.......hope that all makes sense.....Cheers 👍😁🇦🇺

@Sebastopolmark 9 жыл бұрын

G'day Shane. Sure are making progress. Looking forward to the overhead shot of all the walls in, so we can get an idea of the structure. Are you going to explain/show us about those tensioner thingies you used on the outside wall. They don't look familiar to me. GREAT job and thank Gary for us. Wouldn't do for you to get a hernia!!

@diyforknuckleheads 9 жыл бұрын

Sebastopolmark Thanks Mark. Stay tuned as l did an aerial view this afternoon !! The tensioners are very simple to use. Just tension the brace with the nuts in whichever way you want the wall to move to make it plumb. Once you do that, firm up the other nuts and nail the rest of the beach off. Hope that makes sense. Cheers

@diyforknuckleheads 9 жыл бұрын

shaneconlan1 Not beach..it meant to say brace

@stevetonga2674 2 жыл бұрын

Hey Shane does the bottom plate get secured into the concrete?

@diyforknuckleheads 2 жыл бұрын

Yes it does Steve. Dyna bolts are inserted through the bottom plate and into the slab 👍

@emmanuelemmanuel4487 5 жыл бұрын

Great job. What is the name of the nail gun you using?

@diyforknuckleheads 5 жыл бұрын

Thanks for that. The gun is a Paslode 3 inch framing gun. Really good tool that a lot of professional carpenters use. Cheers 👍😁

@886014 5 жыл бұрын

Hey Shane, sorry for dragging up a comment on an older video, but as a chippie I wondered what your opinion was on metal house framing? The pre-manufactured systems go up real fast, even solo, and of course the manufacturers claim they do everything bar make the cuppa as they're going up, but I wondered about the down sides? Thermal performance is one thing i've found, but I haven't had experience with a whole house in steel.

@diyforknuckleheads 5 жыл бұрын

G'day Pete, apart from the thermal performance, l don't have a problem with it....termite proof...everything is a s straight as a dye and it does go up pretty quick. The down side as l see it, is that attaching things like door jambs etc may not be as straight forward and adjusting the frames to suit could be a little tricky....especially in the case of renovating when you need to match up to an existing building. Hope that makes sense. Cheers 👍😁

@886014 5 жыл бұрын

@@diyforknuckleheads Thanks mate, yes that makes great sense, I appreciate your input. I've only ever done renos (ironically currently a termite total) with conventional framing, but am tossing up various ideas for a possible OB if we move interstate. I've only ever used metal house framing for a powder coating oven (around 200C). It was great to work with but the project wasn't a success due to the thermal bridging. An extreme case, but it did make me aware of that possibly being an issue in its normal intended application. PS I vote you sell your house so you do another OB KZfaq project ;)

@diyforknuckleheads 5 жыл бұрын

Like you Pete, l've only ever built one house from metal...I didn't find it to bad to work with but l am a bit old school and enjoy the process of timber framing.....good luck with your possible upcoming OB Project 👊👊 Hahahahahahhaha....that would make the missus happy 😂

@bartbug1 3 жыл бұрын

G'day Scott, again sorry for the silly question, if you're cladding the exterior wall would it be better to 'crown the wall studs' with the crown facing inward to the finished wall? Still working on my renos, thanks in advance.

@diyforknuckleheads 3 жыл бұрын

Hhhmmmm....Shane...😉.......Mate, if there is a brace on the wall you are making, have the crown on the other side. That way, when you go to straighten the walls with your planer, you won't have a brace to contend with......hope that makes sense 👍👍

@BuiltByChris 9 жыл бұрын

Hey Shane, top job mate. Just a quick question. When would you use a double top plate? I've checked a few of these vids out of others making stud walls and the greater majority use a double top plate. Any information would be greatly appreciated. Cheers.

@diyforknuckleheads 9 жыл бұрын

Chris ZUREK G'day Chris. You use a double top plate on all external walls. You don't use a double plate on your internal walls. In essence, the external walls are one plate higher than your internal walls. Hope that helps. Cheers

@BuiltByChris 9 жыл бұрын

Cheers Shane. Very helpful, thanks mate.

@diyforknuckleheads 9 жыл бұрын

Chris ZUREK No worries

@grassyfieldz4578 7 жыл бұрын

Hi, just wondering what length of nail you used to frame all this? wish you could of made the indepth series on the framing because that is something i'd actually be happy to pay for video is much easier to understand than books

@diyforknuckleheads 7 жыл бұрын

G'day Skylight. For the framing you use 3 inch framing nails. if you have any questions just shoot me a message. Good luck!

@bartbug1 3 жыл бұрын

G'day Uncle Knackers, I see you have installed a larger beam for the window header...could I use a double 75x35 header for that application?

@diyforknuckleheads 3 жыл бұрын

Just depends on the opening size mate.

@bartbug1 3 жыл бұрын

@@diyforknuckleheads Thanks Mate

@barryroberts6470 9 жыл бұрын

It's starting to look more like a house now with actual walls, still a way to go though before the wife starts to pick the colours for the dreaded decorating ha ha. Take Care, Barry, Baz, Bazza ha ha from England.

@diyforknuckleheads 9 жыл бұрын

Barry Roberts Thanks Baz…don't remind me mate. As soon as l hear the phrase 'lets go pick the colour for the tiles' l am immediately overcome with white noise LOL…cheers

@TheClaudos 8 жыл бұрын

Hi. Do you have a video or do you have a tip where you can show us how to better identify where the crown is on a piece of timber? Cheers.

@diyforknuckleheads 8 жыл бұрын

G'day mate, what you do is run your eye down the side of the stud. That way you can see if the stud has a bow in it. If the bow is curved up (like the shape of a bridge), the crown is up. If the stud is curved down (like a bridge upside down), the crown is facing down. Hope that makes sense. Cheers :-)

@TheClaudos 8 жыл бұрын

shaneconlan1 Hiya, that does make sense.Thank you for your help.

@patrickotana627 3 жыл бұрын

Hey! Thanks alot for posting this vid. It really ignites a passion to get in and start working. I've just office/estimating experience and i hope i'll be able to help a builder in that sense but definitely want to get the backbone of Onsite Practical Work under my belt. - You say the wall require metal bracing rather than ply. I thought this was a "choose whatever you want" option. And with Ply actually being stronger bracing (9kn from memory?) compare to (4kn for metal brace? .. oh gosh it's bit a little while). Why is this ? -- I'm sure the metal strapbracing would make it alot easier to, ply requiring alot more nail fixing ? - I see the wallframes are treated, this being for termites? , why can't just use this orange anti termite like flashing you put under the bottom plate to concrete? - and potentially save money with not needed frames treated or this doesn't work as well ? (am i answering my own question here..) Haha that nope from the kid. (undercover site supervisor there! hehe)

@diyforknuckleheads 3 жыл бұрын

G'day Patrick. Glad you liked the vid mate 👍 The reason for the metal bracing is that because the walls were clad in weatherboards, if l went with the ply l would have to sheet the entire wall with the ply. The termite treated timber is just another layer of termite protection which is really important up here on the Mid aNorth Coast of NSW as the all year round moist conditions are termite heaven! Have a good one mate and l hope you can stick around for more. Cheers 👍🇦🇺😁

@patrickotana627 3 жыл бұрын

@@diyforknuckleheads Thanks alot for your response and wisdom. I definitely will as i am subscribed ! :) 👍🇦🇺😁 Represent!

@anthgoode2011 6 жыл бұрын

Jurgan Klopps new job

@diyforknuckleheads 6 жыл бұрын

Hahahahaha...the big man also makes an appearance in one of my videos!..Check him Out! kzfaq.info/get/bejne/ouB7m66lqN-smo0.html

@mrghm 9 жыл бұрын

time for an estwing nackers

@diyforknuckleheads 9 жыл бұрын

mrghm It's on the list Mrghm :-)

@17MikeThompson 8 жыл бұрын

How often should you put noggins in a stud wall? Like are they needed every so many meters?

@diyforknuckleheads 8 жыл бұрын

+mike thompson Hi Mike. Generally half way up your wall if you have a standard 2.4 metre (8 feet) ceiling height. If your ceiling height goes up to 2.7 metres (9 feet) then put in two noggins but space them evenly. Cheers

@wheres_bears1378 29 күн бұрын

Do you tension the bracing while on the ground or do you square the walls up once lifted into position?

@diyforknuckleheads 25 күн бұрын

You tension once the frame is lifted in position 👍

@wheres_bears1378 25 күн бұрын

@@diyforknuckleheads on ya knackers, thanks for the reply 😊

@diyforknuckleheads 25 күн бұрын

@@wheres_bears1378 No worries mate 👍

@craigperry7376 3 жыл бұрын

The hammer is not worn out, it’s the rubber handle cover! Are they replaceable? 🤔

@FixitFingers 6 ай бұрын

Owner-Builder Super Cut?! 😁 ...just saying!

@diyforknuckleheads 6 ай бұрын

Mate.....you read my mind 🤔 By the way l'll be giving you a call re the whole Super Cut thing.....need some one on one advice 👍

@kandalfus 9 жыл бұрын

megaman

@Stephenmcl1977 9 жыл бұрын

Benny hill has nothing on you. Superb

@diyforknuckleheads 9 жыл бұрын

stephen mclaughlin LOL…I just needed Benny's theme music. Thanks for watching Stephen :-)

@jiminy2731 3 жыл бұрын

How far apart should the studs be?

@diyforknuckleheads 3 жыл бұрын

G'day mate....in Australia the studs are 450mm from the centre of one stud to the centre of the next stud....in other words, from the back of one stud to the front of the next stud is 450mm. In other parts of the world like America, it's 16" from the back of one stud to the front of the next stud. Hope that makes sense 👍😁🇦🇺

@jiminy2731 3 жыл бұрын

@@diyforknuckleheads Yep I'm in Australia and you lost me at inches! Haha! Thanks for the reply and keep up the handy videos! I've been watching your videos to do my own DIY work!!

@TheStigiphone 9 жыл бұрын

Your house is GREEN😮 Why? Did you say 3meters high? Are you that tall Down under? In Norway normal hight is ca 240cm. You get a lot of headroom thoug😜

@chrisversteegen1368 9 жыл бұрын

Stig øvreberg That greenish blueish colour is bifenthrin, a synthetic pyrethroid, in a water base with a blue dye for easy identification. It's to protect against termites and borers.

@diyforknuckleheads 9 жыл бұрын

Chris Versteegen Thanks for answering Chris. Cheers

@diyforknuckleheads 9 жыл бұрын

Stig øvreberg We grow tall down here Stig :-)

@nymredmondbmxcrewsecond2439 9 жыл бұрын

First comment

@diyforknuckleheads 9 жыл бұрын

lucas macgregor You're on the ball Lucas! Well done mate :-)

@jlu942 3 жыл бұрын

Still wondering how Jürgen Klopp finds time to build that and makes these videos?

@diyforknuckleheads 3 жыл бұрын

😂....a mans gotta keep busy Jafeth 😂 If you're interested, you might want to check out my Jurgen Klopp video😂...here's the link kzfaq.info/get/bejne/Y6mUoc2ksJPJlH0.html Thanks for watching 👍😁🇦🇺