Dont change the things you say, thats why we watch. Come for the mods, stay for the Sarahisums.

Great content Sarah. I love how you can flip from Japanese sport cars to Detroit pickups without missing a beat.

Another project! You are the hardest working person doing car jobs on the internet.

Nice seeing you and Rookie Pilot working on a project together.

Sarah we know you're still going to put your very best into this just because it's for Charlie, and every video with Charlie and Angel are ALWAYS filled with EXCELLENT information that translates well to the camera! I hope you guys had a lot of fun! 🥳

POR 15 tip....on opened cans it's easier to drill a hole in the lid and stick a bolt in the hole when you're done and use a disposable container to apply the paint, than try to remove the lid again. I just shake the can vigorously and after the first use I'll drop a 5/16 nut in the can for mixing purposes.

Amazing and wonderful what you are doing. Helping to clean up the truck, swapping another engine and considering you gave it to Charlie. You are truly a great friend and an outstanding person. After meeting you and Angel in your garage a couple months ago, I know what I am talking about. Take the praise, you deserve it. When you guys are finished with it, it's going to be one super duty machine!

Just when we think that your going to Zig, Sarah you Zag and surprise us all with "Now for something, completely different " which makes us ❤ your channel, keep it up 😊

I actually like the look of the frame where you painted POR on it. It’s certainly utilitarian and beastly looking. Kudos to living in a dry climate. Earth is not a vehicle-friendly planet, especially in Indiana where I live. I wish body panels could be made of my grandmother’s Tupperware. Rust is vehicular cancer. As usual, your projects are super well thought out and executed. Keep it up!

This jumping around between cars is fun.

Nice to see Charlie and Angel again...and I love the "Sarahisms"! 😎

It'll be interesting to see Sarah's vision of a work truck. Looking forward to the next episode. 😎

Speaking as one who works for a Coal Mine in Wyoming, a slurry truck pumps Emulsion (a combination of Ammonia Nitrate and diesel fuel) into the holes drill into the overburden (the layer of dirt covering the coal bed). The intention of the blast (called a shot) is to shove approximately 60% of the overburden into the pit left behind by the removal of the previous coal extraction. After the shot has settled, gargantuan dozers are used to push the remaining overburden into the pit, where even more gargantuan walking buildings called draglines will spread the material out. It’s quite the site to see.

Another great video Sarah, great to see Charlie and angel fruit cake back on the channel 😊😊

Showing the world once again that Sarah runs a well rounded shop. Loads of work being done and it's all the usual suspects doing the hands on.

The 6.0 gets a lot more flack than it deserves. The only things needed to bulletproof the engine is an ARP head stud kit and replace the OEM EGR cooler with a Banks unit.

You bought it for Charlie? You perfect doll. 3,000+ views in 17 minutes? I'm not the only one who thinks so, apparently because I'm just sitting here watching the views numbers and the thumbs up numbers keep spinning up every couple of seconds. And congratulations on *600,000+* subscribers! Never stop, Sarah.

Yes please !!! More videos of this truck!!!!!

Angel! Nice to see you again. Miss you on the show.

I love the heavy truck build. Different and interesting.

Something to haul a certain Mister Dos for a tune!

Thanks!

You're so nice to Charlie. You RAWK! Happy Holidays to you both!

Hello from France 🇫🇷 Sarah. Whatever car or truck you are working on, it's a fantastic journey with you. Angel and Charlie are just perfect Compañeros ❤. Peace!

Oh nice! Some truck work. 👍🏻 A small hole in that transmission! 😲 Never change your personality. Things need to be said at that time and we applaud you for it. 👏🏻🙂

Excellent job on the Truck! Yeah defo need to see more on this project! 🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧

Yes please.... more with this truck.

Totally want a Collab with 6061 and weld the bell housing up, welding lesson and you’d get to feed the trolls too 😊

Liberty, taking the word in its concrete sense, consists in the ability to choose.

Happy Tuesday Sarah!!! Sweet!! I was wondering when the work truck Cummins swap was gonna take place. Thanks for making my lunch hour. High5 to Charlie and Angel!! Stay excellent!!!😎

Great to see Charlie and Angel in a video! You 3 make this look easy, when it clearly is not.

Love the way you do your videos. Very excited to see what you do to the aluminum tray

That hole in the transmission is an inspection port 😂 Makes it easy to see the clutch when the cab is off. It also shouldn't affect the clutch to much unless driven in a very dusty environment or stones get in there.

I thing i like about your video's is that you're not afraid to get your hands dirty no matter what vehicle & the vison you have in your head on the task at hand....awesome....nice work on the editing, makes the videos funny.... dont change.... humorous humorous

Every other KZfaqr today: 2024 Tacoma. Sarah: 2005 F350. Love it!

If you're using chemicals with bad vapors, you need to use black respirator filter cartridges. Purple filter cartridges only filter out particulates (dust, mist, etc.).

Holy cow Sarah, is there anything you can't do? I love your sense of humor and your off the cuff jokes/remarks... please don't edit them out they are a treat

This is a super cool project, love that the Power Stroke is also being reused. Excited to see the coming videos on welding the tray for the back. Great to see the team again too! Always fun to see Sarah and the gang!

Nice job, and laughs along the way

Ok this is going to be a really cool truck, can never go wrong with a cummins diesel

Really enjoy seeing the gang back together. Charlie, Angel and Sarah are a pretty sweet Trio.👍

I love the random things you say, it's comedy gold. Impressed by how quick you and Angel tore it apart.

I highly recommend head studs and egr delete. Lots of people talk major crap about a 6.0, but mine has just a tick under 350k on the original engine and it runs very well. I doubt that would have happened without at least the previous 2 mods mentioned.

Love vanquishes time. To lovers, a moment can be eternity, eternity can be the tick of a clock.

Charlie's got a really cool truck to flip - looks very clean, and now running (from what I've seen in your last IG story).

Excellent choice for the Cummins

Had to click. Gotta see how sarah gets down on this. I have watched enough cummins swaps that i dont even care... but i know this is gonna be MINT! Also dont forget to like and share. this car saviour works her butt off. 💚

Don't take the lid off of POR-15. Put 2 self taping screws in the lid across from each other. One to pour out the product the other as a vent.

beautiful! a brush restoration is just perfect for a truck frame. you guys made those cab lifts look easy, though you don’t live in the rust belt but still, awesome!

Oooh! What a nice surprise! Plus 6 spd manual!!!!

Always glad to see Charlie!

Yay the gang is back together again! Great to see both Charlie & Angel Fruit Cake.

Sarah, Charlie & Angel = Dream team 😁

*Little tip* Take plastic food wrap and place it over the can of Por-15 and put the lid on top of the food wrap. This will make future lid removal way easier, also helps to layer or fold the food wrap a few times to be sure it doesn’t tear when pounding the lid back on the can. I’ve been doing this with my Por-15 cans for almost 20 years.

Thanks alot Iv had that little X tool for 20+years from my dad and never knew with it was for.

Been waiting to see this build for a long fell in love with your show watching you rebuild your grandma's ranger and Ragnar.

Wow that hole in the bell housing was impressive...... Nice change of subject matter. I hope to see more of the Super Uty soon.

Great video !!!! More on the truck conversion would be great. As for the transmission , can you weld a plate over the broken area ? Thanks for all you do. P.S. very jealous you life in a warm desert, I am in Alberta Canada 45F today,,, that is the high it will be 29F tonight. Take care, be strong

Knowledge is a process of piling up facts; wisdom lies in their simplification.

Cool project. Love working with the POR. Amazing stuff. Gotta be careful painting directly from the can. Any dust or powdered rust getting in the can really screw with the converter that remains. Begins the bonding process in the can and may ruin anything left in the can. Thanks for your time.

Yeeee food cake appearance, missed you angel

A Superute.. Very nice. Question, I couldn't tell what the bellhousing was made from but if aluminium, could you not weld a 1/4" plate over the hole with your TIG?

Excellent results team Sarah - thanks for sharing!!

I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.

I really need to get a life...every time Sarah´s vlog comes up here in Germany, it is late in the evening. I utter an "Oh, good!" ............Great stuff, Sarah!😁

Por15 tips in the cover sealing lip put a little hole with a nail or knife tip. It allows the paint to drain back. take a plastic bag like the kind from the supermarket and put that over the top of the can then put the cover on. You will then be able to get the cover off when needed without destroying the can. once off do the same thing again.

Nothing ever goes away until it has taught us what we need to know.

Sarah, stay as you are. You are one of a kind. We all love you as being yourself. Love from Thailand.

It's always a pleasure to watch you work. Don't change a thing.

That whole is only in the bell housing right? Get your resident fabricobbler well an aluminum plate in there. Make the hole have regular sides and match the plate to it, drive it till the wheels fall off!

AWESOME!! Can't wait to see how it comes together! Thanks for showing projects that nobody else does.

Definitely want to see another video on it!

What a treat!

Don't stop doing what you are doing. Stay truebto whontou are and continue the way you have been. I have enjoyed these alot.

I haven’t watched one of her videos in a long time, but I sure do still have a HUGE crush on her. Wow. What a woman. ❤

Make more (than just one more) videos on these trucks 🤞

Yay Sarah with another Ford Build

For a cheap less work tip ... Use over paint over rust paint on battery tray droppings also. Use sponge brushes for easy applications..

I love your sense of humour and quirkyness. Don’t edit too much out!😂

Nice to see Charlie and Angel again. Tell them I said What’s Up 😂. I’d like to see your vision on this truck too the end.

POR 15 is awesome stuff! I've used it multiple times, and I've never had a bad result.

Yes!

It might have been 3 hours to pull the engine, but that's with the combined super powers of a Sarah, a Foodcake, and a Charlie. That would have been a week-long effort for us mere mortals.

Great video looking forward to seeing the final product

Very useful information in this video Sarah will stay tuned for the next part of this build.

Most favorite build on YT, you are building my dream truck. I have no "real" use for such a heavy duty beast other than hauling around a mountain bike or the occasional Home Depot run. Thanks for sharing.

So excited to watch this build!

If the transmission case is solid and only has a hole punched into it, I would just fabricate a metal cover to close of the hole...

Can't wait to see this build complete.

I am loving this project. Can't wait for more :)

That paint is awesome. Saves our snow equip here in Chicago.

I might have mentioned that before but here it is again. There are 2 options when I open a new can of POR15 to prevent the stuck/destroyed lid problem. 1 - You can close it with a piece of plastic film between the lid and the can or 2 - (my preferred method) I pour the unused portion into separate baby bottles. I rarely use large quantities at a time so the small baby bottles worth of POR15 are usually just perfect. I also heard people just punching a hole in the lid, pour the desired amount in a cup and just plug the hole back up. Also, POR15 cures much faster in a humid environment (I know weird). So you being in the desert, explains the slow drying/curing.

Will keep an eye on this one.

Oh this is going to be a great series. Really looking forward to it Sarah. Presently on a plane so I will have to watch later but already gave it a thumbs up.

It well be a interesting conversion, look forward to seeing it.

I love cleanin rust, applying the ground coat and then the dark petroleum body safe on the bodyparts. Greetins from 🇵🇱 P.S You're such a professional and hot Boss

Fantastic teamwork

Yeah my '97 powerstroke did the same thing to its bellhousing due to the failure of the dual mass ft flywheel... Iirc, by 2005 they were using solid mass flywheels 🤔

Awesome as always!!! Thx for sharing

You are always free to change your mind and choose a different future, or a different past.