Ferguson 23C Diesel Engine Part 5 Removing the Injection Pump.

Рет қаралды 23,372

3 жыл бұрын

Please support our channel by purchasing merchandise here: bundybearsshed.com/
Hello Im Lance (aka Bundy Bear) and doing these videos is my hobby. I do own Queensland Tractor Spares in Australia where I sell parts and offer technical advise to customers.
Parts seen in our videos can be purchased from www.queenslandtractorspares.co...
We have a lot more than we can offer on our web site available to us and in our store. If you dont see what you would like please email info@queenslandtractorspares.com.au and we will help where we can.
I do try and help with technical advise at bundybearsshed@gmail.com if you have a question or are having trouble with your project.

Пікірлер: 30

@irishmanshamrock8563 3 жыл бұрын

Really interesting video Lance. Thanks for sharing

@BundyBearsShed 2 жыл бұрын

Thanks for watching

@garethdavies3220 3 жыл бұрын

Very watchable , interesting stuff. Thanks.

@BundyBearsShed 2 жыл бұрын

Glad you enjoyed it

@andrewcollier755 2 жыл бұрын

Great stuff. Didn’t realise the pump drive housing gasket was like that. Thanks!

@BundyBearsShed 2 жыл бұрын

Glad to help

@charlesvanderwolf5751 3 жыл бұрын

Thanks Lance --- great video

@BundyBearsShed 2 жыл бұрын

Thanks Charles.

@tractorroo22 3 жыл бұрын

Thanks Lance. Great info 👍

@BundyBearsShed 2 жыл бұрын

Any time!

@TheKnacklersWorkshop 3 жыл бұрын

Off to watch part 6 now...

@BundyBearsShed 3 жыл бұрын

Grab a cuppa, lol.

@Rolf2014 3 жыл бұрын

:-) insgesamt ein gut erhaltener Motor. Schöne ESP. Top.

@BundyBearsShed 2 жыл бұрын

Yes the engine is in better condition than I had expected.

@Drottninggatan2017 3 жыл бұрын

That little clip on the pump drive shaft is supposed to be there. I don't know why. But there is usually a clip hanging around the middle of the shaft. Maybe it is meant to clean the shaft? Like you had on the bicycle hubs in the old days.

@BundyBearsShed 3 жыл бұрын

Yeah I checked it out and can find it in the parts but not really sure why.

@charleshart6992 3 жыл бұрын

Great!

@BundyBearsShed 2 жыл бұрын

Thanks Charles

@jefftheaussie2225 3 жыл бұрын

Lance, How did you determine accurately top dead centre so the dial indicator is on zero?

@BundyBearsShed 3 жыл бұрын

I run the piston up and down looking for the high mark then zero the indicator. Easy to do on the digital ones. on an analugue just look for the high spot in the normal direction of rotation.

@bonifacemusonda8571 2 жыл бұрын

Am working on the 4.236 4 cylinder perking engine. We change head and rotor on the pump. On the test bench the pump is spraying well. On start speak, idle speak and high revs. But it's not having enough presume when fitted to the engine. The engine only starts after spraying quick start even when it's warm.i have tried to advance it but to no avail. What could be wrong? Please help.

@BundyBearsShed 2 жыл бұрын

The vane pump may not be putting out enough pressure.