you guys at partzilla are lucky to have this guy around.. and thanks for paying for the video..

John is such a natural teacher. really enjoy his videos.

I already knew what to do, but the gear shifter...thats gonna be fun, i have the 600rr 2011 so i have more plastics to remove, you have now become my ChrisFix for bikes xD keep the bike videos coming pal.

After watching this video, I'm going to be saving a lot of money. Thank you

You made this job look so easy! Thanks for the awesome video.

You made this look so easy but you should have mentioned undoing the front sprocket before cutting the chain. I followed your instructions except grinding couldn't get the link apart I had to resort to bolt cutters and had a hard time as the previous owner /mechanic used threadlock on the front sprocket. Love the video but if you could instruct us novices about the problems that can arise so we don't get caught out that would be great. Thanks.

You make everything look so easy John, You inspired me to do it myself wish me luck.

John, you're very clear & thorough in your instructions & examples. Thanks bro!

Excellent step by step instructions. I'm doing this tomorrow with no fear.

Love the videos, I have a 2003 CBR 600RR and you've really helped me with maintaining it.

Thanks for the video. Really clear.

Thanks Mr. Talley and Partzilla!

Great video! Followed along last night on my own bike and it worked great. Thanks!

Love these videos. I have the same model bike and these are very helpful.

This was great. Very good instructions

Great video..thanks for making these!!

Thanks for that. Very well presented and explained!

Thanks mate Described perfectly for me to understand Cheers Troy

Than you for being my teacher.

2:30 you've got great videos and instruction, you explain well also. kudos sir usually i make fun of people talking to an inanimate object being the dvr lol, but youres is actually quite godd haha

Really helpful, thanks for the upload 👍🏻

Useful footage! Kudos!

one of the best installation video. thank you.

Thank you so much for this video

Nice video, and nice job atatching and swaging the chain.....you made it look easy. Chains wear, they DO NOT STRETCH!

Great video, not easy for everyone indeed!

your videos are very educational keep em coming

But regardless..you make this look really easy. Thanks for the vid.

Good video. The bit I always find a pain is getting the front sprocket torqued without it rotating by itself.

Perfect Video , Thank you

Great video 👍🏼

Definitely taught me somethings I didn’t know.

Very nice man

Great video

Love this video "up she goes"

perfection

Thank you

Also can you explain how you found which links on the new chain to cut ?

Great video. Very useful 👌

Thankyou sir

Hi John could you please elaborate on how you torqued the front sprocket ? Did you use the back brake to lock the wheel? And is an impact socket safe for removing the countershaft nut?

Hello there… thanks for all your videos… have one question, you know the reason The ABS light on in my CBR 1000rr 2008.. and how can I fix it??

I have a question about that rubber damper on the front drive sprocket. If I am installing an aftermarket 520 chain, should I order a new set of those dampers to put on the aftermarket sprocket?

Sir do you need to put lube around the small front sprocket spline when you put a new one?

I have a 2013 Honda cbr500r. Would these steps be the same one my bike? My old chain broke on me a week ago and have hesitation trying to do this by myself. I have all the tools and parts

If the chain guard did have to be replaced, would that require the use of a special (Honda) tool?

incredible that metal chains actually stretch

sir plz creat a video bajaj dominar 400 motorcycle rebild and anything u can do ...

Good evening I have a 2014 CBR 600rr. Could you place a link too those sprockets and chain?

Guys today when i was jumping on my bike i saw a plastic coming out of the swingarm. Then i realised that it is the drive chain guide ! Bike is brand new honda 2016 300cc rag, and i did 8.500 km on it yet. Is it normal to have that drivechain to be messed up ? Is it under warranty ?

really good helped video, also I have a Honda CBR.

I see different types of front sprockets. Does they matter when the tooth count is 16(oem) ? I mean the center part of the sprocket is differen. There are flat ones and some have something like rubber on them. What I mean is some are bulkier than others.

Awesome video my friend, i totally enjoyed doing the full job on my blade saving a small fortune 💯👍🏻👍🏻😎

So I have a broken key in my passenger seat I already replaced all the plastic with new ones do you have any videos that can help me get the key out?

Good video, I did this job last week on my own CBR954RR. Try to have a more steady hand the next time you grind the chain off, you hit the nut on the sprocket a little. :-) I saw you used original sprockets, so I guess it's an original chain too. why was the chain too long ? does honda delivers just 1 type of chain ? One note, the chain-glider has a down side also. You didn't checked. My chain-glider was totally worn on the down side. Because of a very loose chain and poor maintenance. It wears on the bottom when you decelerate. And last a remark for all the bikers that saw this videos, the original front sprocket with the rubber plating on the sides is so important, the non OEM sprocket doesn't have those, and I red a lot of complains of chain-noise because of the missing rubber plating.

Question I need help ! I have a new chain and sprocket for my 2019cbr600rr. Vortex 525SX3 Tri-Glide and when all set and adjusted it’s at the 5th mark is that right ?!? My swing arm sticker is farther back than that one in the video so I’m soooooo lost

Is there supposed to be a play on the front sprocket after torqueing the bolt?

Nicely done sir. I only cringed a bit when you put the new chain in the vice, without putting a rag between the vice and new part. OCD, don't scratch my new chain. ;)

How long does it take to replace the socket? Your video was 11minutes. Thank you. M. Lish 🙃

Are the torque settings same on 05 cbr rr

Excellent vid, thanks. One question though... some vids say put the master link on at the rear sprocket and others recommend in the open? What gives? Ta

Do you always have to cut the new chains?

How do i get the exact measurements for my chain lol Im so new to this I dont want to put it on and its to short or my chain is t long? Someone please help me understand

OEM chain ⛓️ doesn't require cutting ✂️ up?

what size torque wrench? 1/2 or 3/4

I feel like I should’ve loosened the front sprocket bolt first. Having a hard time getting it off without the chain and tire on.

When should I replace my chain guide

What size was front spocket on impact

On a cb500x 2019, you DON'T have to break the master link ( aka completely break apart your chain) if you're not replacing the chain and are trying to replace the rear sprocket. After loosening the axle bolt's nut on the right side and loosening the chain-tension locking nuts ( one on each side) that will enable you to slide the entire wheel forward enough to loose enough chain tension. Remove the axle bolt ( 11 ish inches long ), and you'll need to kind of faniggle with the rear brake assembly lifting it at a small angle as you're working on sliding towards you ( to the rear) the wheel as the while you're able to remove the chain from the rear wheel's sprocket little by little. When you're ready to reinstall the rear wheel, as you're feeding/putting the chain on the sprocket, start from the top, otherwise you won't be able to get it on as their is an L shaped ( kinda) piece that is welded to the swingarm frame on the left side that gets in the way otherwise. I just finished my project of going from front/rear of 15 tooth/41 tooth stock sprockets, to 16t/40t sprockets ( I wanted lower rpms at the 60+ mph range for slightly better mpg as mpg starts kind of tanking beyond the 4300 rpm range...., about halfway mark of rpm). Remember these torque values, per honda themselves: Rear sprocket nuts ...85 foot pounds of torque/pound feet of torque Rear axle nut ( on the right side )...65 Chain adjusting lock nut ..one per side of the bike = 20 ( it's the 12mm nut...the 10mm is for moving that long adjusting screw it is hard-attached to that literally presses against the square metal faceplate that the 11 ish inch long axle/bolt goes through) Hope this helped someone. I imagine most of this is similar for the 2013 through 2020 models with possibly some minor differences. Contact honda power sports or google a service manual if you can to confirm the correct torque specs for your make and model bike

I can't believe how easy all of this really is, I used to be scared of even taking off my rear tire... lmao

anyone know what the front sprocket bolt/nut is? that is the only thing he didn't say the size of :)

Very helpful videos! Can you post one showing how to clean the carbs on the 2008 honda cbr600rr? Thanks

Did I miss the size of the front sprocket nut?

How do you know how many links to cut? I worry that I'll cut too many! Any help will be appreciated! Love the videos though very helpful

Great tutorial! Did you spray the chain with wax?

is it 42 teeth what you said, is it not 41 teeth in back 16 in front and 112 link chain standard for 600rr 2007+

Is it absolutely necessary to use a riveting tool to compress the plate and the masterlink together? I have seen people use a c clamp and then round some edges in the pin

Hi I have my cbr mc22 250rr I like to put vfr swingarm to my bike I can or no if any one know about this please help me

using power impact should only be used for removal right?

so front sprocket is always writting out?

Is a 32mm axle bolt standard for all cbrs? I have a 04 cbr600rr and I want to buy the proper socket for it but I see videos online that say 27 mm socket

Weird how he barely covered flaring the pins. That's a very important part of the process and you need to be careful.

Very informative. Would it be much different on a 2001 gsxr750? Tired of paying for something I can do myself.

Man I wish you guys would have did the chain slider! I'm having all kinds of trouble!

Did you lube the front sprocket? Great video

Is this job really hard to do without an impact gun im just worried about the front socket mainly

Will I be able to reuse the chain if I grind off the 2 holder pins, is there a way to keep the chain

What's the stock sprocket teeth for an 04 cbr600rr? Front and back teeth it seems like everyone has a different opinions on it. But I want to keep mine stock. They said it changes your speedometer if you change the teeth on them. Is this truth?

We apologize there is 1 moron that watched the video. thanks for the vid definately helps.

How do you know how much to tighten when installing the connecting link ?

is it necessary to cut that brand new chain? since you removed the front sprocket, can't you slide everything in without cutting chain?

Do I have to change only the rear sprocket? Or both front and rear?

What if your chain is a lot longer than you need How do I know how short to cut it?

I have that exact same bike.. what chain size an sprockets do I need exactly?!

bro i have a cbr250r 2011 version...suddenly from the last ni8 it gives continous jerks while riding bro!!! can u tell me the problem???

OEM chain I heared about OEM key

Hi I had a question about the rear axle. Mine seems to be seized on the wheel and swing arm. I can not knock it through even after pounding on it. Any ideas? I really don’t want to spend an arm and a leg taking it to a shop

2009 CBR600RR. I just replaced the drive sprocket with the 'supersprox 1370-16T' product. I think it is a little thinner than genuine. Even though the bolts are tightened, the sprockets do not come into close contact with the washers. Pull the sprocket by hand, it move with 1 ~ 2mm gap. No problem? What action should I take?

Can I use a car floor jack to lift a 2007 cbr600rr? Where to place?

How do you know how many links to cut off the new chain?