How to Rebuild the Clutch on a Honda CBR 600 RR | Partzilla.com
Рет қаралды 244,414
8 жыл бұрынGet parts for your CBR 600 RR clutch rebuild here: bit.ly/CBR-600-clutch-rebuild-...
Learn how to rebuild the clutch on a Honda CBR 600RR motorcycle. Remove and evaluate the clutch plates, then reinstall new clutch plates in the correct order.
See the clutch diagram for a closer look at what we’re working on: www.partzilla.com/catalog/hon...
Read how to do this job step by step: www.partzilla.com/blog/honda/...
When you’re done, you’ll need to adjust the clutch cable on your CBR 600. Here’s how:
• Motorcycle Clutch Cabl...
VIDEO HIGHLIGHTS:
Remove engine clutch cover :51
Clutch disassembly 1:50
Soaking clutch plates 4:07
Reassembling clutch pack 4:40
Sealing engine clutch cover 6:30
Adjust and attach clutch cable 9:07
Honda CBR 600 RR parts here: www.partzilla.com/parts/search...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2008 Honda CBR600RR, but you will have similar steps for your Honda motorcycle. If you’re not sure whether these steps apply to your motorcycle, leave a comment and we’ll get back to you.
RELATED CONTENT:
Changing the oil on a Honda CBR 600 RR:
• Honda CBR 600RR Oil Ch...
Adjusting and lubricating the chain on a CBR600:
• How to Adjust a Motorc...
@Mangamemesguy Жыл бұрын
This man is who I think of when I’m working on my 2008 Honda CBR600RR. He is the reason why I’ll keep my bike until it gives out. And even then I’m sure this man will help me revive it.
@carlosliranzo4706 10 күн бұрын
Same 😂
@matthewtrout1738 6 жыл бұрын
this guy is the greatest
@danejurus69 4 жыл бұрын
I love these videos from Partzilla about this generation 600RR and they have been SO helpful, I just wish there were more tutorials about this bike.
@KordiakDG 4 жыл бұрын
The way you put back the cover amazed me:) It always takes me 80% of the time of whole operation:)
@groundknifer 8 жыл бұрын
nice vids, very clear and professional. i did my chain and sprockets recently by following your other video and now i think i can do the clutch. this is on a 2005 cbr600rr
@gosugenji 5 жыл бұрын
My clutch is burning out, so I decided to do a bit of research on how to fix it. After watching this video, I have enough confidence to make the repair. Much appreciated!!
@Jontteee3 5 жыл бұрын
did you make it man? =)
@gosugenji 5 жыл бұрын
@@Jontteee3 Turns out it wasn't the clutch after all, the cable was too tight and had a kink. That was causing my shifting to be erratic. All good now.
@terrywilliams1162 2 жыл бұрын
Excellent breakdown of the process. I like finding the tips of the trade through professionals such as this man. A lot less tools are thrown that way!
@johnd1031 7 жыл бұрын
More of the CBR 600rr please
@rudylopez4557 5 жыл бұрын
Very nice vid i just bought a 600 just like the one your working on Thanks for all the tips and making it look easy.
@fishfinder3583 6 жыл бұрын
these videos are a big help, thanks again -sell lots of parts!
@reezonoce Жыл бұрын
Thank you guys @ partzilla, seems the whole clutch/starter gear assembly is similar for a cb650f, only the design of the clutch case seems to be different, and due to lack of proper installation guides and or videos on that type of bike, it made it hard to figure out what I needed to do exactly, but this helped heaps!
@chihuahuaverde425 3 жыл бұрын
Great video. Thanks for including all the part numbers too.
@SystemAdministrator1 7 жыл бұрын
This guy is good
@dsuess 7 жыл бұрын
Wonderful breakdown, thank you very much!! And the part numbers was VERY helpful
@PartzillaParts 7 жыл бұрын
Glad we could help!
@drewtaylor6623 6 жыл бұрын
Great video. This looks allot easier than valve clearances lol
@christidmas3995 5 жыл бұрын
Enjoyed the video.Well done.Just a point.The basket and inner wear because of power on and off operation.Especially wheelies and burnouts etc.You can file them smooth,but very crude way to get rid of the ridges.Just replace them. Makes the clutch noisy too.Keep up the good work.
@jozefkovac2694 7 жыл бұрын
Hi, I would ask you how many nm or fp we need for 8 mm bolts. Thank you Ps: great videos.
@ArturK1M 3 жыл бұрын
Great video. Do you guys know what Thickness the Metal Plates should be? I bought 7 new steel plates at 2mm each but they were too thin therefore I needed to refit the old set. Bought ut from online shop, enquire in progress. Thanks
@kaseyvega9041 Жыл бұрын
Hi there , amazing video . I followed all instructions as prompted however , once fully completed, I tried turning on the bike and nothing . It won’t crank over , even in neutral . Any recommendations?
@romangarcia8171 7 жыл бұрын
Will this process work the same for a 03 cbr600rr??
@diogodomingues5941 7 жыл бұрын
Amazing videos! Great content and really hopeful. Can you make a video for a replacement of fork seals and fork oil? Thank you
@PartzillaParts 7 жыл бұрын
We will add it to the suggestion list! Thanks for watching.
@DailyPanigale 3 жыл бұрын
First bike is a 07 cbr600rr... always come to these videos for tips
@HamedSiddiq 11 ай бұрын
I will be removing the clutch cover on my ‘07 600rr this next week, after some parts arrive. I’m concerned that the previous sealant will be difficult to remove. Why does it seem that in this video, the surface appeared free of any sort of sealant prior to reinstallation?
@santostyler5576 2 жыл бұрын
Would this be the same thing for a 2007 cbr 600rr?? I would love to KNOW ASAP because im literally about to go out and try to do mine myself
@joshthepimpj 4 жыл бұрын
You should still show us how to remove and replace the clutch basket. Besides that it’s very useful.
@candyman190 3 жыл бұрын
What did you mark with the marker on the clutch housing?
@BeginnerBikeLife Жыл бұрын
Do you sell a specified tool kit for this?
@qwerrrz202 4 жыл бұрын
Hey, I'm in the process of resealing my clutch case on my 2008 Cbr 600 RR. But I cannot find a torque spec of the clutch cover bolts. Would you tell me how many NM these bolts get? I seem to remember they need to be tightened in a cross pattern?
@dindanio1 7 жыл бұрын
hi great videos find it totally helpful. will you guys do the valve clearences for the 600rr?
@PartzillaParts 7 жыл бұрын
We haven't yet, but we will add it to the list of suggestions. Thanks for watching!
@dustinmcintosh6799 8 жыл бұрын
I don't even own a crotch rocket but I enjoyed your vid.
@kawilifezx10r23 5 жыл бұрын
You forgot to mention when you put the clutch hub back in make sure there is no play in the clutch pack meaning with the hub in and torqued tou can not move any fibers back and forth.
@MrConcordskiy 2 жыл бұрын
Can you tell me whats the torque specs for clutch lifter plate screws, for 1992 Honda CBR 600 F2? It has 4 screws.
@ivancirjak1044 Жыл бұрын
Hey man can you please tell me the depth of the intermediate plate
@zidanzidan2018 8 ай бұрын
Do the clutch plates have a front or back position?
@Noel127 3 жыл бұрын
Is this the same for the 2006 CBR1000RR?
@gin21zkato Жыл бұрын
Is that posible after crack very old clutch cable . Your clutch lever can fall from device inside cover?
@homegrownluv8106 Жыл бұрын
U don’t have to drain the oil as the clutch pack is above the fill line. A small amount will leak out once u take the cover off but u do not need to drain the oil.
@MAMOSTA420 5 ай бұрын
thanks❤
@jamessmith-pn6bq 7 ай бұрын
Okay here's my problem and my issue on my 05 CBR600RR while pulling the clutch when I put it in gear it clunks real hard like the clutches are not disengaging all the way to put it in gear I'm running it down the highway to shift it into higher gears put a drag would I go to the clutch is that normal and I have played in the clutch cable I needed to learn how to adjust it
@BicZippo 4 жыл бұрын
My bike leaks where that cable comes out. Any ideas?
@cyberkiller83 4 жыл бұрын
Hi John. You being a clutch expert, maybe can take me out of my misery trying to understand, why some clutchs has various types of friction disk? and some not? and what is the differente between the disk and the consecuences of using the same disk on the entire basket? I have a Yamaha FZ6, and it has 7 friction disk 1 type and 2 different type of disk on both ends of the clutch basket, why are those different? I ask because after i rebuild my clutch, i realized seeing this video and checking my bike manual, that i made a mistake and put 9 friction disk of the same type on my bike... it works, but its dragging at little at engagement, so i dont know if that is the reason. Thank you.
@androidman73 6 жыл бұрын
Great video..... I noticed you went back a tooth on the outer disc. But the old one didn't have it that way. Why is that ?
@PartzillaParts 6 жыл бұрын
It's an old trick to reduce clutch chatter.
@AlchemyMelbourne 5 жыл бұрын
Great video guys, one quick question, if your clutch cable keeps snapping down the bottom near the engine, can this be a sign you need to rebuild the clutch?
@PartzillaParts 5 жыл бұрын
is it wearing on something? Cables don't generally "keep snapping."
@czarbomba7 7 жыл бұрын
Great video series, do you have a video for a valve clearance?
@PartzillaParts 7 жыл бұрын
Jordy -- we did a valve clearance adjustment on our TRX ATV, but no motorcycle valve clearance videos yet. (Here's the TRX video: kzfaq.info/get/bejne/d6mfod2I2a6cdp8.html). We'll put CBR valve clearance on the list of video suggestions.
@coreybryant6245 7 жыл бұрын
Please do. Would love to skip the dealer on the valve adjustment I'll need soon.
@christaylor4854 6 жыл бұрын
Partzilla
@zmanrules56 4 жыл бұрын
Nice
@moimeself1 7 жыл бұрын
Great tutorials! I own a 2006 R1. The problem i have with it is the gears will only shift from 1 to 2. Anytime i try to shift to 3 and up it feels like it hit a brick wall. this only happens when bike is running or in motion. once its off i can shift into any gear. Please help because i cant sit out another riding season.
@PartzillaParts 7 жыл бұрын
Hello Ashdale. What you are describing sounds like a shift fork problem.
@Theprofessionalnetwork 7 жыл бұрын
Can you do a video on the cbr1000rr clutch replacement? I can't figure out how to get the basket apart - it doesn't have the bolts.
@PartzillaParts 7 жыл бұрын
Thanks for the request, Noto. We'll add it to the repair request list.
@luedog8385 7 жыл бұрын
Notsoprobro use the big hammer
@enriquedb666 3 жыл бұрын
awesome
@RoliPoliOli00 4 жыл бұрын
Doing this on a 2013 cbr 250r is so much more difficult ugh...
@Huckstuble1 7 жыл бұрын
i followed this video detail for detail when changing my clutch. my clutch engages if i kick it into first and neutral without my lever engaging. my lever wont engage at all what could this be?
@pepperschannel444 5 жыл бұрын
Did u find out, what it was ? Was it that you placed the last friction plate improperly ? (at 5:30) ? Tx
@charlieone2992 7 жыл бұрын
didnt mention how much torque for the 8 mm screws around the cover. can I get that please
@Jawsim2 6 жыл бұрын
They are actually 6mm bolts on that cover, 8mm is size of socket He use for unbolt them. The tightenig torque for that size of bolts is circa 10 Nm.
@user-rd2sg6vi5j 5 жыл бұрын
你好，请问哪里有PDF维修手册？我看不懂英文，但是可以转Word后通过谷歌翻译成中文
@ciriomorales1160 Жыл бұрын
Good day all i need some help cbr600rr2004 always overheated and i heard some noise inside engine i think chain and oil pump what we can do to resolve this overheated problem thank you all for reply me
@jerrym5271 4 жыл бұрын
Would you be able to use HondaBond 4 instead of the sealant you specified in the video?
@PartzillaParts 4 жыл бұрын
Hondabond works
@jonathanlavineduzwheelez 2 жыл бұрын
How many ft lbs torque for engine cover bolts anyone?
@anurag77719 7 жыл бұрын
very informative. BTW, why do we rotate the last clutch plate by 1 tooth during install? Is that in service manual?
@PartzillaParts 7 жыл бұрын
Hello Anurag. its to help reduce chatter in the clutch pack.
@MegaMomurda 6 жыл бұрын
Rotate in what direction? Any info on shift return spring? 03 cbr 600double r
@simioncsm5042 4 жыл бұрын
Thank you for this video, clean and easy to understand. I have a question, my clutch is geting engaged in the last cm of lever's shifting gap and the second issue is when the gear is in Neutral, a strange noise is coming from inside the gear, like a failed ball-bearing. The plan is to overhaul it, but I want to know what to expect like gettig some info from someone experienced prior heaving hearth atack :)) My bike is a Honda CBF 600N from 2006. Cable is at maximum allready, The noise is gone as soon as I am just touching the clutch lever. Thank you
@deathdog1644 4 жыл бұрын
Boom Boom find out what’s wrong, my bikes doing the same thing
@simioncsm5042 2 жыл бұрын
I have a new cable, not change yet, had no time to investigate deeply.
@markcochran723 7 жыл бұрын
Hey im about to do a clutch job on my 08 cbr600 rr i was curious about what you said about the clutch basket that if you engage a gear and its not engaging correctly i may need that part what is the exact part name or number i tried to find it thanx
@PartzillaParts 6 жыл бұрын
I think you're referring to the clutch basket. #2 on the diagram. www.partzilla.com/parts/search/Honda/Motorcycle/2008/CBR600RR+A/CLUTCH/parts.html
@trblsom77 5 жыл бұрын
great video! i have a question: i am JUST replacing the clutch/crankcase COVER, but am going to use beginning and end of this vid... should it be in neutral or a specific gear for just the cover change? I'd assume neutral... but wanted to check with ya. thanks!
@PartzillaParts 5 жыл бұрын
If it's just the cover, it doesn't matter.
@trblsom77 5 жыл бұрын
@@PartzillaParts thank you, changed it out and back up and riding ✊🏍️
@atheerrazzaq6077 7 жыл бұрын
I have Cbr600rr 2007. The clutch is very strong and usually I can't feel my left hand from the pain next day so is it normal or problem in it
@PartzillaParts 7 жыл бұрын
Here are a couple things you can try. Make sure the clutch is adjusted corrected to eliminate free play and it engages properly. Check that the clutch cable fittings are greased and move freely. Lube your clutch cable and make sure it's not binding anywhere. This should make it feel less stiff. (it's most likely your cable is either routed incorrectly or it has never been lubed.) Or you could always do exercises to strengthen your hand grip until you can crush a baseball in your hand...then none of that will matter. Let us know how it goes!
@nasritan473 3 жыл бұрын
hi. can you do a cbr600rr 2007 model, front sprocket seal replacement? part number is OIL SEAL (40X62X8.4) 91207-MAL-601
@matt3122 5 жыл бұрын
Do you ever replace the lifter bearing or pressure plate?
@PartzillaParts 5 жыл бұрын
If there is significant wear, but typically they last a long time.
@Redfast999 5 жыл бұрын
Is there a certain way for the steel plates to go in some people say is a soft side and ruff side how to tell the difference on the steel plates
@PartzillaParts 5 жыл бұрын
As a habit, I usually put the rounded edge all facing toward the motor. The important thing is to have all round edges facing one way. Some don't have a differing edge, then I would make sure the stamped side is facing in.
@mugaguest1 5 жыл бұрын
does it matter which way the steel plates go in ? Because i know that one half is flat and the other kinda has a round edge.
@christidmas3995 5 жыл бұрын
Round edge out.T think they are stamped out of metal in the factory that way.As long as they are perfectly flat.
@dontfollowmygirlgetsmad7769 6 жыл бұрын
Is this the same steps for the 2003 Honda cbr 600rr?
@PartzillaParts 6 жыл бұрын
It will have slight variations, but same overall concept.
@prescook5385 2 ай бұрын
How to rebuild cbr 600 rr 2009
@juniorc8635 3 жыл бұрын
How do you remove the clutch outer guide and needle bearing?
@williamngo8345 3 жыл бұрын
kzfaq.info/get/bejne/Z7SGoM-bqdvad3U.html try here
@zacknicley8150 4 жыл бұрын
Does this need done after a certain mileage or due to abuse or both? What would cause a clutch to wear out?
@PartzillaParts 4 жыл бұрын
Usually just wear and tear depending on how you ride it.
@jamessmith-pn6bq 7 ай бұрын
Can anybody help me with that with the issue that I have
@adriansy365 6 жыл бұрын
How are you sir, i just got a question for my 2007 cbr1000rr clutch related. So i bought this bike from someone. And i notice the clutch friction point is right down the bottom. Like when u pull the clutch in and go to 1st gear. As soon as u begin to leting the clutch go it will start engaging.(its got hydraulic clutch) now most bike will start to engage when u pull the clutch in and let it go at 80% now the adjuster on the lever doesnt do anything it made it worse. I pull the clutch in and go to 1st gear and start engaging straight away(very dangerous). Now my question is, does it need a brand new clutch kit?? And when i pull the clutch in i notice a sound from where the cltuch plates are located. And there is not much tention on my clutch 😣😢😢
@PartzillaParts 6 жыл бұрын
Inspect your clutch. There really isn't another adjustment other than at the lever.
@davidcollins7902 Жыл бұрын
Great video. Followed your video and replaced the clutch . all went well untill i attached the the cable to the arm on the case. there was nothing. the arm is engaging the shaft on the basket but the clutch lever is dead even after adjusting, Any idea why this might be the case? put the old plates back in and its doing the same.
@johnrailsback3829 Жыл бұрын
Did you figure it out? Same thing happened to me
@Twitch412 4 ай бұрын
You guys figure it out ? About to do mine in a few days and if I run into the same issue … @davidcollins7902 @johnrailsback3829
@lesafighter 6 жыл бұрын
is the procedure the same for the 2003 cbr600rr
@PartzillaParts 6 жыл бұрын
It is essentially the same.
@matt3122 5 жыл бұрын
Does anyone see the wear from the springs on the bolt holder posts @ 3:46? Is that normal? Does the inner clutch need to be replaced when it gets bad?
@PartzillaParts 5 жыл бұрын
That is normal. If it is severely grooved, then replace. A little wear won't hurt anything.
@gshell2520 3 жыл бұрын
I wish this guy was my neighbor 😆
@lifeisgood070 4 жыл бұрын
Thank you for describing what the service manual would say to do.
@PartzillaParts 4 жыл бұрын
Some people learn visually.
@lifeisgood070 4 жыл бұрын
@@PartzillaParts In case there was any confusion, I was genuinely saying thank you, so that I could have 2nd resource to follow along with in addition to the manual.
@duanehawks9405 6 жыл бұрын
I'm having a problem with my 92 f2 clutch. Gas leaked filling up bottom end. Was like this about a week. Noticed, changed out with new oil, now clutch doesn't work. What should I do?
@PartzillaParts 6 жыл бұрын
You may have to take the clutch out to inspect it. Could have damaged the discs.
@dontfollowmygirlgetsmad7769 6 жыл бұрын
Will this work on a 2003 Honda cbr 600?
@PartzillaParts 6 жыл бұрын
The concept is the same. There might be some slight variations.
@lifeless9155 7 жыл бұрын
wanted to order clucth kit from your site not sure on how the models work I have a 2012 honda cbr600rr. On the site it has numberd after.
@PartzillaParts 7 жыл бұрын
Orlando, Give us a call Monday - Friday 8AM - 7PM EST Saturday 8AM - 4PM EST at 18774734595 and one of the parts techs can guide you through the site and get you what you need.
@PartzillaParts 7 жыл бұрын
Hi again +Orlando. Hope you were able to speak with one of our customer service reps. If you haven't had a chance to call, I just wanted to let you know that the part numbers for all the Clutch components are exactly the same for the 2012 Honda CBR600RR 2A, 2012 Honda CBR600RR 3AC, 2012 Honda CBR600RR A, and the 2012 Honda CBR600RR AC So you could order parts from any of the above models and they would be exactly the same parts. Here's the CBR600RR A, clutch diagram for reference: www.partzilla.com/parts/search/Honda/Motorcycle/2012/CBR600RR+A/CLUTCH/parts.html
@mercedesbenz2171 5 жыл бұрын
Is there timing on the basket ???
@PartzillaParts 5 жыл бұрын
I'm not entirely sure what you mean, but I'm going to guess no.
@darryllwright9819 4 жыл бұрын
So after changing the friction and metal plates and putting everything back together, my bike wont start, it will crank but not turn over. My starter fuse is good, the fuel pump primes when I turn it on and I have power (new battery) I cant figure out why it wont start
@johnrailsback3829 Жыл бұрын
Did you fix it same thing happened to me
@Cola_Dulz 5 жыл бұрын
Hi. one question. I've noticed some markings on the pressure plate (visible on 6:15 in the video), the markings look like minus signs in circles (two of them). Are those markings important to assemble the clutch in the right way? I've changed my clutch plates but not sure about the orientation of the pressure plate. I see those markings on the pressure plate but nothing on the basket. Can somebody explain it to me. Thanks
@PartzillaParts 5 жыл бұрын
They are just casting marks. Not relevant.
@Cola_Dulz 5 жыл бұрын
Partzilla thanks for the reply and for the awesome videos.
@AaronNevard 4 жыл бұрын
Honda CBR 600RR 2004 16k miles Have vibration issues around 5k rev and above, feeling the vibrations in the grips and pegs. The vibrations do disappear when I pull the clutch in. I've fitted new large heavy end bar weight which has help abit but still feeling it 🤔 Anything else to try or anyone had the same issue? Could it be the clutch basket?
@malolan108 3 жыл бұрын
Have the same issue. Did you get it sorted and what was it?
@davidbishop2913 Жыл бұрын
The one thing he didn't tell you guys is the steel plates have to go with the flat side facing the rounded side of the steel plate faces in towards the you could see this and feel this if you look at each steel this is very important
@markulyssestacod8129 7 жыл бұрын
Hi i would like to ask what is the problem when its hard to change gear? is it the clutch basket?
@PartzillaParts 7 жыл бұрын
Hard shifting is usually a sign of the shift forks and/or gears in the transmission not meshing properly.
@markulyssestacod8129 7 жыл бұрын
Partzilla Or maybe i have a clutch drag? does clutch drag is when the clutch does not disengage properly??
@uptownsamcv 5 жыл бұрын
put a new clutch cable on my 600RR thinking the cable was stretched cause i was starting to notice slack in the cable and adjusting wouldn't help. I put the new cable on and it didn't help the problem. someone told me maybe my clutch is worn out but I haven't noticed any clutch slippage. after looking at illustrations I'm wondering if maybe the bearing for the clutch pull pin is worn out...
@PartzillaParts 5 жыл бұрын
If you tighten the slack out of the cable and it still won't disengage the clutch, you'll have to dive in and see what the issue is. Could be the pin, you'll have to go in and see.
@uptownsamcv 5 жыл бұрын
@@PartzillaParts i changed the pull pin and bearing today and still no luck. could the pull pin lever mechanism be worn out?
@MegaMomurda 5 жыл бұрын
Try replacing your springs
@GoofyHoonie 7 жыл бұрын
What do you mean by one tooth back?
@PartzillaParts 7 жыл бұрын
The last plate, just rotate it one notch when you insert it. If you watch the video closely, you can see how to place it.
@fambam9154 7 жыл бұрын
do yall have a kit with everything needed
@PartzillaParts 7 жыл бұрын
What year, make and model unit do you have Ghost?
@fambam9154 7 жыл бұрын
Partzilla 05 honda cbr600rr
@shaphilly5805 6 жыл бұрын
Is this about the same for the 05-06 model cbr600rrs?
@PartzillaParts 6 жыл бұрын
It will be about the same.
@doigor 6 жыл бұрын
Partzilla my clutch is very heavy that hurts my wrist after a while. Would it be the cable adjustment or the clutch needs to be replaced?
@PartzillaParts 6 жыл бұрын
Try lubing the cable first. Sometimes, after awhile, you get friction.
@user-iw6uc7lk2o 7 жыл бұрын
пожалуйста подскажи у меня люфт пружин в корзине надо менять ,могут они создавать грохот ?
@PartzillaParts 7 жыл бұрын
Извините, если мой русский не очень хорош. Использую переводчик. Рев? Они могут создавать болтовню сцепления. Дрожа.
@rogerdavis6736 2 жыл бұрын
Not sure if anyone noticed but in the bucket where the studs are there are bad spring indents so that bucket should of been changed because they should all be smooth so look back 4:00 and look inside the bucket and you will see the spring groves that have warn in on the spring and bolt studs
@rogerdavis6736 2 жыл бұрын
Sorry go back to 3:30
@geocalamansi8356 2 жыл бұрын
@@rogerdavis6736 what signs give away that the basket should be replaced? I also have little indents where those springs go, but my clutch still good freeplay cable slack etc..just wanna make sure cuz i just opened up my clutch lol its a bitch to put that clutch pin to catch while trying to put the cover back on.
@sorrymom779 6 жыл бұрын
Yeah I put 7.5 foot pounds and it broke my bolt off inside the clutch.
@PartzillaParts 6 жыл бұрын
That's the worst! Get it extracted and try again. Sometimes the bolts are stretched out or have a defect which will cause it to break. That shouldn't happen often.
@fatguyalwayseats 7 жыл бұрын
how many miles are on the bike? i have 34k thinking about replacing my clutch
@PartzillaParts 7 жыл бұрын
This one has 16k on it.
@fatguyalwayseats 7 жыл бұрын
Partzilla thank you great video by the way. Are going to make a video how to do a valve adjustment. I have 2007 cbr600rr and ur videos are very clear and explanatory! Thank you.
@PartzillaParts 7 жыл бұрын
Andrew, Glad the videos are working for you! We're all done working with the CBR for right now -- we actually traded it in for a VTX we're about to start at the beginning of December. We'll put a valve adjustment on our to do list; good idea.
@saffronwilliams2771 7 жыл бұрын
Andrew 07599021285
@maximumx392 6 жыл бұрын
the clutch need oil? i have put this engine on my kart, is work in progress
@PartzillaParts 6 жыл бұрын
It's a wet clutch, the engine oil runs through this area. No need for separate oil.
@oscarino00 5 жыл бұрын
👍👍👍👍👍👍👍👍
@michalkucera7657 5 жыл бұрын
👍
@justaguy4real 5 жыл бұрын
0:40 drained the uhl, whats that?? ohh oil haha
@PartzillaParts 5 жыл бұрын
Keeping it real with them southern roots, Mikeyb.
@theanhnguyen79 7 жыл бұрын
Phong huynh
@user-ol4fr6dn5q 5 жыл бұрын
✌
@alesjezek9755 2 жыл бұрын
Super,Labombastic,Fantastic, Školastic!!!!!!👍🤝👏👌🤘😍🏍️💓😇🙏🧠🐬
@glauberlopes484 6 жыл бұрын
Cbr 600f3
@tonyj9016 6 жыл бұрын
I had an F2 and you had to remove the springs and remove the nut In the middle of the clutch while keeping the clutch from spinning. There is a tool to keep it from spinning but many people just use something soft like wood to jam in there and keep it from moving, and not break any gears. The F3 may be different, I'm sure there's a write up online you can look at
МИЛАНА ТУТ 👀
Рет қаралды 6 МЛН
Chaseontwowheels
Рет қаралды 46 М.
A CIGAR WILL DO.
Рет қаралды 257 М.
PavePro Asphalt Solvent and Release Agent
Рет қаралды 2,7 МЛН
Ninja H2 Moto Tourist Bogey Biker Highlights -Ride4 Isle Of Man Drive Motorcycle Race Crashes #crash
Motorhub_089 - Motorcycle Crashes
Рет қаралды 20 МЛН