it's so perfect. The chainsaw is literally made to work with a chain already. Use an actual chainsaw chain attached to a fixed gear for extra impractical coolness. Then you could brake with the lack of a throttle

I would have used so many zip ties this build wouldn’t even be worth it. This was super clean and well made

Love the editing. Great job.

This is awesome...I love how you didn't just hack this together and both the bike and chainsaw can be reused!

I bet that clutch got red hot. You need a way bigger sprocket on the wheel or run a jack shaft. The rest of this build was done very well though. Good job on the mounts.

"How do I make my bike faster?" Google: Train leg muscles Bing:

Your chainsaw bike is probably the neatest practical build I've seen. I've been riding motorized bicycles since 07 and kinda loss interest in the last couple of years and haven't rode much and was thinking about selling everything. But I'm glad that your video popped up because it's renewed my interest in a chainsaw bike and I have a few husky chainsaws that I might try. Did you ever get the gearing figured out?

Hi! I also made a moped from a huskvarna chainsaw, but only from huskvarna 142😂

Real nice ima get mine started gotta wait pay day

Great Value, quality bike

Finally! Someone did the obvious... with bicycle parts. Well done! Yes, a jack shaft with... what else... The pedal crank. Enjoyed the videos.

One question, why didn't you use the stock the sprocket on the chainsaw? Edit: nevermind saw the stock sprocket on your other vid

Nice! You should make a exhaust pipe for it aswell, so it becomes more quiet and doesnt blast fumes in your rear end

wow your the man

Good creative work

amazing

Nice setup I believe the Chain tensioner would've worked better on the back side of the chain... I'm getting ready to put a STIHL MS 088 122cc chainsaw motor on a bike or a moped

Where can the small sprocket be gotten?

Would putting a chainsaw engine on a moped work?

Great!!!

Nice what is the top speed

the transmission ratio is fucking awesome, clutch will work normally at the speed like 200 m/h

Ma chi è questo genio

Husqvarna had to be positioned in reverse so that the gases would be evacuated to the rear. Thus, at speeds, the airflow pushes the exhaust gases back into the cylinder.

I want to know how you made that sprocket

Where you get the silver adapter

Top speed ?

How easy is build this?

i want one of these...

I been thinking about this my whole life i didnt know anyone would actually do it

استمر

Hey man, awesome project, but how fast it can go ?

Wow!!

old ass 80cc chainsaw, runs really well, no safety's whatsoever

Sir please tell me if1 letter petrol are using these engine how many kilometers are reach these engine? please tell me

it is best getting a bike ignition and a key as an option.

Здравейте стандартна верига от велосипед ще си пасне ли с стъпките на моторната резачка или трябва друга?

Checkout the updated version Chainsawbike 2.0 - kzfaq.info/get/bejne/sL5-dLJ-t8jeeqM.html Thanks for watching! If you enjoyed this video click the 👍🏼 button that helps out the channel and for more content subscribe and hit that 🔔

I think I just pulled out the sharpest knife in the whole city!!

Кристиан Вигенин 👍👪

Yes, you could spend thousands of dollars on an eBike kzfaq.infoUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ and get something much higher quality. However, if you're looking for a basic model to try out eBiking this is a great choice. The assembly is easy as far as bikes go (took about an hour for me to do, I'm not an expert). All tools needed are included. I added the plastic mud guards you see and a more comfortable seat. The other reviews are correct that you're probably going to want a better seat (Giddy Up! Bike Seat is what I got - super comfortable). The battery easily handles a 2-4 hour ride if you add some of your own pedal power. I haven't even gotten it up to top speed yet - it is very fast. Components are not top of the line, but decent for the price and work just fine. It works great on dirt roads and singletrack and pavement although too heavy to do tricks or any serious technical mountain biking. I'm looking forward to using it a lot over the summer. Tons of fun!

Класс, какая скорость?

please help i have a saw gf-5200 And the The clutch can not take up please help

3:47 dude, how much engines do you have?, and they're in good condition too...

Very//in/geanus idea; what's the dementions of them 3 pieces of metal used for mounting the motor ? I Know ; probley not suppose to ask. Just need to know. PS. Your idea's the best out there! what can I say....?

This is what people will riding when the zombie apocalypse happens.

Tried with 51 teeth sprocket and 20" wheel. The gear ratio should be like twice slower, the clutch was slipping.

The sprocket was installed using music and pointing.

Im gonna to get a small Engine for my bike and upgarde

Hey I have a problem so I welded the sprocket on the outside of the clutch and I’m using the stick 7 speed on my rear wheel so when I hooked it all up I couldn’t pull start it unless I lifted the back wheel up because it was to hard because of the chain so I had to lift the back wheel up but when I did that the chain fell off cause it was loose, do you think that’s cause I need a chain tensioner? Thanks

Hello. I realy liked this idea and decited to make my own. I folloved your directions step by step. When I finished it I decited to take it for a test ride and the clutch burned out becouse the chainsaw had too much rpm. My small gear has 11 teeth and the big one 48. That gives me a gear ratio of 1 to 4.36 . From the video I know that your small gear has 8 teeth and the big one also 48. That gives a gear ratio 1 to 6. How did your clutch survive? My chainsaw is a Grizzly BKS 35-14 (35cc) Can you or anyone reading this comment help me out on how to solve this problem?

Vibrater generator Co cycle pa kaise lagaye

Test it where is the test video???

What is the point of the gear switcher mechanism, do you really need it?

Hey i want to make a chainsaw bike and i have a question, can i put the chain to the existent sprocket of the wheel? And not make one on the left bc i am afrait of damage the spokes

Well done but there needs to be a kill switch!

You should film yourself riding

Heated saddle 😂

this clutch must slipping

But you didn't show the mounting of the new sprocket on the wheel and making the mounting

How fast does it go with you on it? Because it’s only 51cc

4:22 where to buy this component

How many kilometers speed to move

I'm pretty sure you voided at least one manufacturer's warranty.

Am si eu un 51, si mere de rupe

whats the model of this chainsaw?

Petrol miles 1litre per kilometers

A quick way to improve it would be to have used a professional grade Husky. Yours is a 51 which is a homeowner grade and not rated anywhere close to the 351 that's rated for 3,000 hours at full throttle minimum.

test sürüsü neden yapmıyorsun

What gear ratio are you using?

I'd put a muffler that spews out to the back.

Why so many ads

Someone should sell chainsawbike kit

swap them gears around and fly!

Interesting video, music quite annoying though!

When accidents occur its not smart to use that as a throttle because it wont close. if youre under the bike and the throttle wont close and your foot gets in to the spokes its like a meat grinder.

Where is exhaust ?

Bigger chainsaw

она так не может ехать. обороты минимум 16 раз надо уменшить. и сила будет.

Glad you didn't go for the more stupid friction drive method some idiots are going

я тоже собирал среди колесо и движок надо редуктор поставить.

and next nuclear bike

The fr to try By to GT too o

I cant even breathe right.. macgyver would be proud

Pleaas look my motor bike kawasaki tj 53.. 6speeds khm 80 MARKO ZD THANKYU

😆

Kha tiang kan nei ve lo

throttle not safe

Oh man...im gonna be more popular in my city than Breatney Spears. Can you imagine going to see the father of your girlfriend for the first time with that super bike? What can i tell to the police i dont have no papers...its going 25km/h or 50km/h?

K2779

Poor man's motorcycle

R7iiooo

Upgrade it pls so it goes fast

2 potentially fatal flaws 1. your throttle has no self return spring that could get stuck wide open when you least suspect it and hurt you or some near you at the time 2. your kill switch is out of reach making a number one 1000 times more dangerous if your engine does get stuck wide open you have no emergency shutdown no control

unbalance, why not use the original sprocket

56u

Russian E bike

Bezveze

Я от самый русский которого вы ищите)

Another total fail instructional video. Instead of SHOWING how the sprocket was installed, he just says "SEE HOW" the sprocket was installed. Same for the rest of the video. Not helpful to anyone.