Chrysler Pacifica - Updated Active Grille Shutter Wiring

Рет қаралды 103,277

Күн бұрын

In this video I stay late at the shop to look at a '18 Chrysler Pacifica for one of my used car dealers. They installed a new active grille shutter (AGS) and claim it doesn't work. So they installed a new factory harness and it still doesn't work! Let's have a look and see what we find.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 591

@retireditguy9493 Ай бұрын

This is one of only two KZfaq channels where I hit the like button before I watch the video.

@eltonyancey6426 Ай бұрын

They're all good.

@sblagg527 Ай бұрын

The other is Pine Hollow Diagnostics. The two best car diagnostic/ repair channels on YT.

@billkaczynski7709 Ай бұрын

Me too !

@aleskyfinis1025 Ай бұрын

Like videos made

@darkwingduck3320 14 күн бұрын

Lol me too

@danwoods315 Ай бұрын

My dad, who was a lifelong mechanic always said "If this was easy, everybody would be doing it!" You are always proving his point!

@frompdiggity Ай бұрын

Its 8:45pm in Australia and im outside watching this with my fiance. The first thing out of her mouth is "Theres your problem lady!". You know you found the right girl when she can quote Eric while reading her book. Anyways, Eric, thanks for not only being informative, entertaining and just funny as all heck. Youve provided me with countless hours of teaching but more importantly.....you give everyone confidence. Confidence in that if you can do it.....we can do it. Dont be afraid when a light comes on. Educate yourself, try to fix it and save money!! But always with a slice of humble pie and know when youre over your head so when it needs a big fix by a professional, you didnt give them a rats nest of "shouldn't have done that" Wish you and the family the best.

@jamescaron6465 Ай бұрын

DO NOT let that girl go!

@frompdiggity Ай бұрын

@jamescaron6465 you have no idea the joy in my heart when we were stateside and drove by a NAPA and she said " NAT A SPONSAAAA"

@jamescaron6465 Ай бұрын

@@frompdiggity LOL! That's Brilliant!

@dannydines5664 Ай бұрын

Hilarious.

@jamesrdorn Ай бұрын

What's it like to be in the future? Do we have flying cars yet?

@gregeconomeier1476 Ай бұрын

"Extra care in engineering, Chrysler Corporation Cars, Chrysler Corporation Cares." For you youngsters, that is a musical tune that was in a Chrysler ad campaign from days past. Many days past. So many days past they have obviously forgotten the tune.

@GunfighterWyo Ай бұрын

I remember that. I am two quarters, two dimes, and a penny old.

@Luigi-pk8mk Ай бұрын

It hasn’t been that Chrysler since the 1998 takeover that SHOULD have been stopped in its tracks by the FTC.

@hankhessig6586 Ай бұрын

it hasnt been true since the 60's

@TeemarkConvair Ай бұрын

so old in fact they forgot how to spell it...? S-t-e-l-l-a-n-t-i-s..??wheres the "H"?

@ShainAndrews Ай бұрын

Right... because not a single manufacture has ever changed wiring, or components.

@topher8634 Ай бұрын

Gotta love the mid year engineering change.

@tjroelsma Ай бұрын

Mazda had a period back in the 80's where you had to order parts on VIN number ánd year and month of production, as the mounting holes on parts like fenders seemed to shift a few millimeters almost every month........ how stupid can it get? You buy the part, hold it in place and it seems to line up just fine, have the part painted and when you try to mount it, the bolts just don't fit.

@johnhufnagel Ай бұрын

probably a supplier change, and someone started making the shutters wrong. or there was an actual legit reason to change it.

@Troy_Built Ай бұрын

That has been kicking my but for two weeks solid on a multitude of cars. Why on earth did Chrysler think it was a great idea to put so many options on 300 and Charger brakes? Even with the VIN it only narrowed it down to four. Then the rear control arms on them is about the same story.

@lancenichols-mm1fc Ай бұрын

I work for Toyota and we have to deal with a lot of used cars. Infact that's all I mess with. If I ever have an issue I always hit your channel up first for research. Fix many cars due to your channel. Appreciate the detail in the research you do and informing others and techs of the issues that are not specified or mentioned in tsb's. Many thanks guy.

@brandonlavender851 Ай бұрын

I'm a mechanic down in Tennessee and have run into that exact problem! I appreciate your time

@DD-DD-DD Ай бұрын

"scared the puddin' outta me!" 🤣🤣🤣

@CedroCron Ай бұрын

Good stuff Eric! What they should do is include a male-female adapter that changes the wiring using a connector that connects between factory wiring and the new part to change the wire layout so if it's needed, it's included. But that would require thinking and we all know OE's... Cheap and "no thinking" at all!

@RickOSidhe Ай бұрын

I was going to reply with the same comment! Why in the world would they not include either instructions on the possible need to repin along with the blank plug, or include a short inline adapter? Either one should have been included with the new AGS, especially if they no longer mfgr the AGS with the old pinout!

@sblagg527 Ай бұрын

@@RickOSidhe Two words: bean counters

@harrywalker968 Ай бұрын

$30, for a new harness. $32, for an adaptor..

@frankmuschetto3385 Ай бұрын

Thanks! Another great video. Always learn something new. I noticed your "wearing" your readers. Good move. Please accept this small donation towards buying a pair with magnetic nose bridge. I found them to be more comfortable and less likely to snag on anything. For that sophisticated mechanic's look 😊

@Troy_Built Ай бұрын

One of my friends has the magnetic ones. His are the only ones I've ever seen.

@lamarw7757 Ай бұрын

* you're.

@hawkeyetec Ай бұрын

Good communication needs to be addressed at engineering. Oh, they just let go of their engineers! No joke!!!

@brucedale4465 Ай бұрын

I don’t think I will ever buy another stellantis product. One was good but the newer ones seem to be just junk!

@ghillbilt9750 Ай бұрын

Heck ya! We got the old school opening! I sure missed the " Hey there viewers! Welcome back to south main auto channel."

@jhonditch4269 Ай бұрын

I always hear "self made auto channel" and to me that name seems to fit.

@mullinsjm1 Ай бұрын

@@jhonditch4269I always joke and say “self made” when he intros. Haha!

@wendwllhickey6426 Ай бұрын

Chryslers what a POS car company 😂

@jimpantherdrivervickers5439 Ай бұрын

$$$$$$...that's why.

@mobilemowers Ай бұрын

His first videos he called himself Dr O. Watch one for a few minutes. He was shorta nervious and less grey too.

@bags4 Ай бұрын

Hey Eric, you forgot to beep the horn on the 3rd restart

@Rollerhock293 Ай бұрын

Contact!

@MH-ev3wr Ай бұрын

"Hey, it's THAT guy!" One of my faves, always makes me laugh my ass off.

@williegillie5712 Ай бұрын

Gotta hand it to Eric. He made me the mechanic I am today. Him and some of my other buds on KZfaq like scanner danner and Ivan. Lots of wisdom and experience going on in their videos

@GunfighterWyo Ай бұрын

The is an old saying to the effect that knowledge is wasted unless shared.

@thealliedspy4170 Ай бұрын

All great dudes to learn from. I also like watching Hayes Mobile Auto Repair as well

@dav1dsm1th Ай бұрын

With respect Mr O, you would have found that without service data - because you'd have kept going until you understood the problem. Thanks for the videos.

@jz9189 Ай бұрын

On vacation in Poland, and I still can't miss S.Main Auto episode👍🏻

@elliottmaher2365 Ай бұрын

Been watching for a couple years and this is absolutely one of my favorite channels! Thanks for sharing; I’ve learned quite a lot!

@missulu Ай бұрын

Great video! To answer the question: chrysler screwed up. This was an oopsie!lol! When they moved from the manufacturer in India to the cheaper one in Pakistan in 2018, they got what they paid for...

@hibagriff Ай бұрын

I love watching your channel and videos. I think it's great what you do. I have been a mechanic for 30 plus years And have worked for a family owned business for the last 27 years. I really hope to 1 day open my own shop. I love knowing what I know and I Can't get enough of learning more. Keep up the great work!!

@Txcowboy80 Ай бұрын

Note to self. "just because it's new, doesn't mean it's right." I've learned so much technical stuff on this channel, thanks Eric.O & Co. I hope you get to a Million subs soon.

@eddiereichel9354 Ай бұрын

Had a guy stop yesterday with a 09 youkon. He is a retired shop owner. His wife woke up went to leave for work and no headlights. She took his truck and told him to have it fixed when she got home. He stopped at my shop and told me 60 dollar bulbs replaced 3 months ago blah blah blah. I said did ya check the bulbs. He had a spare so we plugged it in. Wala let there be light. I explained to him those vintage gm eat bulbs and the fancy pants bright bulbs don't last as long. Also that good and new are 2 different words. Old dogs can learn new tricks.

@lvsqcsl Ай бұрын

What do you mean "they don't last as long." Why, I have a set that has the little fans on them that cool them to insure they last longer. They lasted all of a year. They did put out some serious light but you are correct they don't last as long.

@mph5896 Ай бұрын

My neighbor has a Subaru in which you have to peel back the bumper cover to replace bulbs. After she bought "fancy" bulbs from the auto parts stores for $50 for the pair, I got tired of replacing them after they went out a few times. I bought HD bulbs from the Rock for like $4 a bulb. Its been fine ever since. And I polished up the plastic headlights so she could actually see at night. 🙃

@TheOcculus Ай бұрын

Y'all are learning the difference between upgraded and better

@imtheeastgermanguy5431 Ай бұрын

@@mph5896I have also problems with milky headlights. In Germany it's actually not allowed to do this but I don't care. On the other cars they never get milky

@NATA5II Ай бұрын

It is voila a French word, not wala lol

@BehindTheCounter_TFSO Ай бұрын

Eric O, that was a great case study highlighting the power of service information (SI). It's puzzling to me why some shops still today don't invest in service information (SI), considering how valuable they can be. Just think of the time and money it would've saved this used-car guy if he had SI. We're all concerned about how quickly we can get the part and how fast we can install it, but often overlook the importance of verifying the repair.

@scannerlanier471 Ай бұрын

Trouble is SI costs $$$$ and sometimes SI is brand specific so you spend $$$ for GM, $$$ for Toyota, $$$ for etc. You have got to consider that is the $$$ worth the use you will get out of it? Used cars are generally polish the turd and sell it. Do the obvious and ship it. They will not take the time to diagnose and use service data.

@MrMebigfatguy Ай бұрын

Was fighting something heavy and let out a "mother of pearl" which helped, then immediately thought l,where did that come from. I realize now it was good Ole sma.

@farmermiyagi1338 Ай бұрын

I tell my customers, male or female, "There's yer problem lady!"

@mullinsjm1 Ай бұрын

@@farmermiyagi1338I’m in the home oxygen business. When I get called to a home where an oxygen concentrator is malfunctioning; I’ll think that in my mind when I find the problem after troubleshooting. Haha!

@WreckDiver99 Ай бұрын

Between Eric O, Derek B, and AvE...my vocabulary has been forever changed. Honestly, Eric should just do the right thing here and pretend he never saw it. LOL

@GunfighterWyo Ай бұрын

@@WreckDiver99 I keep a file of the EricO sayings. Love them. I use them on the brother in law who isn't worth the air he breaths.

@WreckDiver99 Ай бұрын

@@GunfighterWyoLOL! My wife is always "WHERE did that come" when I say something like "Mother of Pearl", or "Moses Sandles". Yesterday I had to replace a kitchen faucet and yea, eww. The base of that cabinet is rotting out after 25 years of abuse, and I said "I'm just going to do the right thing and pretend I didn't see that". She wasn't too impressed...LOL.

@robertfitzgerald3432 Ай бұрын

Is it any-wonder SMA is the only utube vehicle mechanical repair site I subscribe to.

@clintprice2123 Ай бұрын

There is always something very valuable shared here! So happy to have gotten rid of cable tv and watch you tube and actually have socially redeeming content. I subscribe to some of those you also watch, they too are very skilled.

@brianmeek5236 Ай бұрын

You had me at grille shutter , amazing technology from the 1920’s

@andrewwmacfadyen6958 Ай бұрын

Indeed Rolls-Royce did with simple bi-metal strip thermostat.

@jamescaron6465 Ай бұрын

@@andrewwmacfadyen6958 We can't have that! it is too simple and reliable!

@NoPlanProjects Ай бұрын

🤣

@machintelligence Ай бұрын

I had one on my John Deere "B" tractor from 1948. No water pump, thermosyphon only -- so no thermostat, just the manual grille shutter.

@Garth2011 Ай бұрын

Yes...I believe they used those shutters on the older cars such as Rolls Royce in the day prior to the invention of the coolant thermostat and pressurized cooling systems.

@Stringmaster413 Ай бұрын

Grilled shutter. Active Overheating System. Mr. O never doubt the manufactures ability to not say anything about changing the product.

@Failure_Is_An_Option Ай бұрын

Fail open. Nice try.

@zeke1eod Ай бұрын

Awesome job, and it shows a dedication to your customers staying late getting it done. Stay safe, and God bless

@robiecarmichael9958 Ай бұрын

Your old instructions always prove themselves. Test and verify! Great video and showing the need for good information to verify. Thanks and have a great Easter

@jayjudd6518 Ай бұрын

I’m believing your a electrical wizard. 🧙‍♂️

@Just_D.I.Y. Ай бұрын

I had the same issue with aftermarket side mirrors on a 07 F150, the came wired incorrectly for my truck, swapped the wire connectors to match the factory plug and alls good. Keep up the good work, and thank you for the entertainment.

@MrGardman Ай бұрын

Great Saturday morning. Another SMA video. Always entertaining and informative.

@lvsqcsl Ай бұрын

At 7:55, "I would assume it would have come with this paperwork; they can't be selling these things and NOT telling people." Why just the other day I was asked at the dealership for my VIN for my vehicle. I keep it conveniently located in my wallet. I also try to keep in mind some specific knowledge about my vehicle. For example, I have a Ford with a Saginaw steering box; you just never know when those parts guys are going to ask for that information. I would have never for one single second ever thought any company, especially a highly reputable company like Chrysler, would ever make running changes and not tell anyone. The best part: Eric was able to keep a straight face while making that statement. GREAT VIDEO!

@jhonditch4269 Ай бұрын

Christ Ler is no longer what it once was. and jeeps are worser than evar

@robinsonsmotorcycleandauto3929 Ай бұрын

Paperwork does come with new shutters. Unfortunately people toss them thinking its install directions. I do these all the time for body shops and keep a ton of these connectors on hand and the replacement has all 4 pin locations open. No splicing needed as its just a repin. If you have a good parts guy they will sell it or at least ask if you need it.

@andyd9900 Ай бұрын

You're a rare breed. As a parts guy most people have no clue of even what make of car they drive or the year. I get hit on a daily basis with people that do not know the year of the car, engine size or Sub model. Then they get mad because you can not look up the parts.

@rickconstant6106 Ай бұрын

@@andyd9900 At most parts suppliers in the UK, all you need to know is the vehicle registration number (= license plate number), as they have access to the central database of vehicle manufacturers' specifications for each individual car.

@Echo024 Ай бұрын

Had something similar with a fuel tank pressure sensor on an Expedition. Would have had to drop the (full) gas tank to access the sensor and re-wire the pigtail. So I cut the harness open at the PCM and swapped the wires there!

@RDele02 Ай бұрын

You are the diagnosing guru. Learning a lot from your videos. Thank you.

@spray_and_pray Ай бұрын

I was floored when I ran into this a year ago, I just checked my schematic and compared it to a newer one and found the discrepancy. I was glad to have my si that day.

@MrRjsnowden Ай бұрын

Funny I asked you about this model a few years back. Glad I listened to you!!!

@georgeprice6252 Ай бұрын

Hi Eric George here from Canada, Yes I agree with you on dealerships they just want our hard earned money, was talking to fried he had a ford explorer took it dealer because warranty wasready to expire he wanted oil change or just regular maintence he said , but he said he told them to do an inspection on it, because it was close to running out, they told him they could inspect it until he had a complete rotor and brake job, he ask what that would cost they told him 2000 dollars, he told them he wanted a second opinion, told them to just change the oil,/ so he comes home and takes it to a local shop here ,we only have two here,// they check his brakes and rotors and told him there was nothing wrong with his and they did not need to be changed, he said his warranty is gone so he will not be going to dealership anymore,/ as you have mentioned before they want to see you stuff you do not need, thanks Eric , always watch and find your videos very interesting, and you explain everything out with lots of details, keep up the good work, if you were running a shop near me i would be a customer of yours

@paradislarry Ай бұрын

The power/knowledge of the Internet ... If your dad could see the tools his son has today

@fredpolice2711 Ай бұрын

Great channel. Quickly became one of my favorites. Keep up the excellent content. Awesome job. 😊

@evalsgpar6840 Ай бұрын

At the end of video ,do a recap say clearly steps start to finish..problem , steps to fix…Thanks Eric..U R # 1.

@gregorythomas333 Ай бұрын

Mopar wants EIGHTY FIVE DOLLARS for that little harness cross over connector! Me & a Dremel would be fixing that problem for ZERO dollars :)

@johnhufnagel Ай бұрын

for $85 I'd go through the hassle of pulling the active shutters out and re-pin it on the part side. but then i'm insane. :D

@amunderdog Ай бұрын

kept try to figure out why Eric could not de pin the other end, and mix his own pattern. Still puzzles me.

@johnhufnagel Ай бұрын

@@amunderdog mentioned that in another comment. probably would have to pull the unit out, which means taking the nose off. if it were me, I'd have done it. but i'm not a shop. "you touch it, you own it." applies. if he broke something else in the process, well now he has to replace it on his dime.

@djsi38t Ай бұрын

@@amunderdog He could have...BUT...he wants to keep it OEM as possible for the next guy...That is why...He always does things as correct as possible...even though an easier cheaper way is at hand.For a diy guy it wouldnt matter...but for him it does..

@scannerlanier471 Ай бұрын

I was thinking the exact same. I have done the exact same. Shove it in the hole, make sure you have good contact , then backfill the hole with a sturdy rtv. I wouldn't pay the $85 for the adapter. You can bet that is what the used car lot will do.

@hapklaar Ай бұрын

Love these whodunnit analyse and diagnose video's. That scope is such a handy little tool.

@NoName-zn1sb Ай бұрын

Yay! You're wearing your most important tool!

@Boilerking76123 Ай бұрын

Love the used car guy specials

@abw121 Ай бұрын

Happy Easter to SMA! Waiting to watch kid search for eggs. And now watching a SMA production! Better then the Easter Bunny, Eric O. Keeps going and going! Thank you!

@kennethbrown8723 Ай бұрын

Another wonderfully designed American car!

@wickerman9569 Ай бұрын

As soon as your said they sold him the shutter & new wiring harness I knew it was going to be the harness. This has happened to me more than once working on cars. Some things on cars they shouldn’t change. If it’s not broke don’t fix it. I’m sure it was to save “them” $ not us. Thanks for the video. Enjoy the figuring out wiring problems. Those are the ones I hate to work on.😮

@stewart6315 Ай бұрын

Good catch Eric!

@jimclifford1241 Ай бұрын

Bruh. Boom. Thanks for being here man ...

@jackpalczynski7884 Ай бұрын

It's Chrysler. Probably their grill shutter supplier was replaced mid year and the new low ball one pinned it wrong so Chrysler, wanting to do the right thing but being out voted by the bean counters said "Ship it wrong. We'll change the harness with a bunch of cuts and splices to save 8 cents a unit". And that's what they did.

@davidsolberg9935 Ай бұрын

Very interesting. Somehow a couple of my shutters broke off on my Pacifica and that happened 50 thousand miles ago. It works perfectly. Love your show. From Iowa and salty roads.

@user-pp1ni2jy3f Ай бұрын

Once again, glad I own a 45 yr. car.

@robertrosicki9290 Ай бұрын

Jeeze, auto shutters . Imagine how well that system will work after five winters in the salt belt .

@imtheeastgermanguy5431 Ай бұрын

For what do you need this junk anyway?

@robertrosicki9290 Ай бұрын

So engineers can exhibit their ability to design failure prone levels of complexity and the manufacturer can claim 0.001% better fuel economy with faster engine warm up ?@@imtheeastgermanguy5431

@djsi38t Ай бұрын

@@imtheeastgermanguy5431 It is to help the heater blow hotter in the wintertime.Closed shutters allows the water to get hotter.Its actually quite helpful in that respect.Imagine 10 below at 70mph shutters open as opposed to closed.Much warmer heat in the cabin shutters closed..

@Garth2011 Ай бұрын

Yes or when ice forms on those plastic parts and the motor and linkage is trying to move them. LOL

@imtheeastgermanguy5431 Ай бұрын

@@djsi38t hmm makes sense but a thermostat is doing a similar job.

@gregbarnett3141 Ай бұрын

As a mechanic on the collision side, I have done these many times

@untitleduser666 Ай бұрын

The thumping behind the dash after turning it off is the recirculation door actuator. They fail all the time on those RU pacifica/voyagers. You can see it moving back and forth trying to find its home position with the glove compartment out. Also, chrysler loves to change connectors and pinouts. I think OEM charger/challenger/300 fuel pumps come with a connector kit and I've had to change to a completely different connector when replacing a fuel rail pressure sensor on an RU pacifica.

@denniscampbell703 Ай бұрын

Hi Eric , this channel is better than a sherlock holms movie you use great logic! Awesome mechanic! I fixed the wifes sedona oil leak You are the man!

@Micko350 Ай бұрын

I remember one of the CDJ(Chrysler/Dodge/Jeep) promotional Slogans from the 90's "It's a Jeep thing, you wouldn't understand" that has stuck for me at least, & rings so true to many things they do... 😅

@samueld9816 Ай бұрын

Thank you for posting a link to that uScope!

@tomwagner4516 Ай бұрын

Any day with a new SMA video is a good day. We know you have been pumping out a lot of vids, probably trying to get to a million subs. You’ll get there, you should have at least twice that. What’s more important is to keep it real. Your shop and customers are #1. We know you will always do the right thing. Thanks.

@vincentlallo6543 Ай бұрын

dont beat yourself up ,eric. the day before i retired i was still learning about my job.

@brucehobbs1734 Ай бұрын

Thanks for all the content!

@richtfox Ай бұрын

I saw this happen with the old Chrysler K-car series involving the taillight wiring. Good show😊😊

@GunfighterWyo Ай бұрын

It is great how you figure out how to make these repairs. I guess you have become the garage of last resort. Great job. I am glad that folks (mates) in Australia are learning along with us.

@josecondemarin9586 Ай бұрын

Wow, great discovery, as I know dealers are not honest at all. Your customer is very blessed to have you there for him. Take care, thanks 😊

@timothytilley5594 Ай бұрын

Nice to see you’ve discovered the power of the headlamp! It puts the light where you’re looking! And that’s all you need…

@AKChryslertech Ай бұрын

Yeah FCA has been doing that lately. I had a jeep patriot 2.4 L a couple months ago the customer changed the throttle body on then it wouldnt start. He used an oem throttle body from chrysler and it came with a new connector and paperwork as well. He wired it in one wire at a time not realizing chrysler changed the pinouts on the new throttle bodies. He called me so i went out and troubleshot it, and wound up comparing the oe wiring diagram to the diagram on the paperwork he got and found 3 of the wires got changed around. Once i fixed it and wired it in proper, it started and all codes cleared when i cleared it and did the throttle learn.

@DmJm09 Ай бұрын

I literally just went through this exact job today. Too bad Mitchell didn't list anything about this that I could find. Shuffled the pins around and works again. Good stuff! 👍

@SouthMainAuto Ай бұрын

Nice work!

@jeanfrancoismenard705 Ай бұрын

Like as always Mr. O the first thing i learned with you as a teacher, is even looking at the car make a small case study on the problem. Use everything i can like interwebs, youtube, scan data, trying to make me a head before entering into the job. But sometimes i feel to impatient and want to wrench right away !!!!

@kakeetoalex9924 Ай бұрын

Access to information is key. Good stuff..😊

@allenhiemenz1439 Ай бұрын

Great work Eric

@robpeters5204 Ай бұрын

This is why you are the man! Keep doing your thing!

@glenharper3136 Ай бұрын

Thanks for the video Eric, You fixed it again.

@richard1835 Ай бұрын

Thank you SMA. Appreciate the video.

@twoschful Ай бұрын

Thank you Eric. Great video as always!

@jerryking2418 Ай бұрын

Great detective work. Praise be for All Data.

@titaniumman_22 Ай бұрын

Nice catch Eric. Have a great weekend! 🇺🇸

@one44east77 Ай бұрын

Another one of your great videos. Thanks for the info and for sharing.

@david600R Ай бұрын

Thank you so much man I love these

@jamesanderson4014 Ай бұрын

Excellent figure it out repair. Massive prompts. Thanks for the video.

@craigsmith8217 Ай бұрын

I'm glad you like puzzles.

@rbailey225 Ай бұрын

Why on earth would the parts guy sell him the post 4/18 shutter and the pre 4/18 plug? If both parts are new that's on the parts guy.

@OcRefrigeration Ай бұрын

Yep. u nailed it !

@jhonditch4269 Ай бұрын

why? in the words of Bill Clinton "because I can"

@Boga217 Ай бұрын

Yeah I'd be getting the right one on the house in that case.

@Dirtyharry70585 Ай бұрын

Cause they ordered the wrong parts and the parts guy never read the update. ‘I don’t get paid to think’

@jhonditch4269 Ай бұрын

@@Boga217 no one can decipher which ones may be correct

@jamesshepherd5222 Ай бұрын

I bet you rock at playing "Clue". Keep up the great videos.

@BigBoxDodge2020 Ай бұрын

Wow, it's a little after 3 AM on the West Coast. You must get up early.

@davidnull5590 Ай бұрын

Thanks SMA for the video. I had always thought the used car guy went to State Line Auction near Waverly or the one in Rochester, I never did imagine he had a car auction that close to his lot, now that is convenient.

@wk7060 Ай бұрын

Great video Eric!

@markh.6687 Ай бұрын

Nice work, Eric! Nothing like finding out the manufacturer's parts are garbage out of the box.

@W62315 Ай бұрын

Eric O. you're an editing machine!

@SouthMainAuto Ай бұрын

Weather was crappy outside so I took advantage of it inside lol 😂

@W62315 Ай бұрын

@@SouthMainAuto Well, thanks for all of the videos. First time in a loooong while I won't be able to watch everything on release day. Thanks for keeping the junk cars running and the rest of us entertained/educated!

@billziegmond4943 Ай бұрын

Thanks engineers.

@Redial2416 Ай бұрын

It's about time you got a fairly easy one.

@wadepatton2433 Ай бұрын

I wonder how many other SMA viewers have their very own collection of Rock Auto magnets. Just spotted your locker and busted out laughing because I was talking about parts the other day and made reference to the Rock. My pal with the parts house has a fridge completely covered with them. When you gotsta have it and the normal channels aren't producing---ROCK ME!

@smitty2307 Ай бұрын

You’re my hero Eric O 🤠😆 simple solutions 😊

@JackdeDuCoeur Ай бұрын

Nice work

@gflores7018 Ай бұрын

Awesome 👌 thank you for the videos

@RichardMoynahan Ай бұрын

Nice job!

@rhkips Ай бұрын

Who knows, there may have been something in the box mentioning the update, just no one ever pays attention! The number of bricked $3500 GM radios I see shops installing because they don't read the bright yellow sticker on the box saying "DO NOT TURN THE CAR ON." ;) On the off chance this Pacifica finds its way back to your shop with a non-op AGS and/or an AGS code, there's an AGS cycle counts reset under Special Functions in the PCM. Good practice to do it anytime the shutter is replaced; I've seen quite a few go wonky a week later. :)

@SouthMainAuto Ай бұрын

I reset it before it left 😉

@BigBoxDodge2020 Ай бұрын

0:10 Wish you could reset my sleep schedule. After 3 bladder cancer surgeries, I can't sleep worth a crap anymore.@@SouthMainAuto

@odisdanser3980 Ай бұрын

Very informative

@jeffmiller6100 Ай бұрын

Great content ❤

@konstantinusstoyanov9749 Ай бұрын

Creative, thank you

@user-nk2pg9vf6m Ай бұрын

Eric, I've been watching your channel for several years.....I must say sure wish we had many more technical mechanics like you all over the USA.....these days we have folks that just like to change parts....As Mickey Pipes from HVAC also from you tube channel also from the great State of New York, he tells his employees 'If you not testing your guessing. Keep up the great work with the videos.