CLADDING THE NEW SHED | Wrap, batten and some great value Cedar!
Рет қаралды 212,943
3 жыл бұрынHaving gone with a post structured frame, the first job was getting the membrane on and some vertical battens ready for the cladding. The cedar is a nice alternative to treated and a great price!
TOOLS USED
Large Square - amzn.to/2C3m6yD
String Line - amzn.to/2PluIDS
Bosch circular Saw - amzn.to/3gwr3z1
Bosch impact - amzn.to/3fqQNeY
Breather Membrane - amzn.to/2PxCcDY
Framing Nailer - amzn.to/3gByDIP
Self level laser - amzn.to/2URSeL4
SUPPORT THE CHANNEL
Our Patreon Page - / restorationcouple
Buy a Restoration Couple Mug - www.restorationcouple.com/shop/
CONTACT US
restorationcouple@gmail.com
OUR SOCIAL NETWORKS
Facebook - / restorationcouple
KZfaq - / therestorationcouple
Twitter - / restocouple
Instagram - / restorationcouple
OUR BLOG
www.restorationcouple.com/
#diyshed #cedarcladding #cladding
@markchambers9415 3 жыл бұрын
what kind of people would give this a thumbs down.working at home with your daughter helping you is fantastic.your a great family man.the world needs to clone you.lol.
@regthebackyardjackofalltrades Жыл бұрын
@-16:27 the child says: “There’s a Lady Bug…” the great thing is that even when helping the child is focusing her interest in nature. I’m watching countless shed builds and learning from each one. I’m almost at retirement age and keep in contact with Smithsonian Scientists and a Taxidermist that I worked with in Djibouti Africa. I’m a mechanic by trade but a lifelong fan of science. The one second part when his daughter talked about nature is great. I have to build a custom work shed due to my spacing, I’m thinking about cladding my shed with pine. Thanks for this video.
@JUNK4UCREW 3 жыл бұрын
looking great Tim. I built my shed a few years ago and its very intresting how different you have built yours to mine. I opted for a wooden framed floor with deckboard and screwed the side and end frames into the base. If you do plan on installing a window try and get an old PVC window and put the glass into a wooden frame it looks great and much more secure than single glazed.
@jixuscrixus1967 3 жыл бұрын
Great garden shed build tutorial, nice detail, finish and excellent presentation. Subscribed
@JasonTaylor1 3 жыл бұрын
Hand nailing close to the end, flip the nail over on something hard and hit the nail point with hammer to blunt it and it shouldn't split the end grain when driven in normally
@calebfuller4713 2 жыл бұрын
But it's just as quick to pre-drill a hole. If you make a stack of boards and pre-drill all at once, probably quicker!
@leonmilner9994 Жыл бұрын
Great tip for the corners, might try that for my shed!
@chmoduk 3 жыл бұрын
With the cladding spacing you can just create four inch marks on each end of the shed corners bit like a story pole in brick laying saves messing about with a level or wood spacer.
@passiton3801 2 жыл бұрын
Love the template, much easier to position! Already made my own, ready to fit them...
@robmaule4951 3 жыл бұрын
Nice one Tim. Good beats playing on this one too 👍🏼
@MegaSpender 3 жыл бұрын
Love your vids m8, really nice work. Awsome too see some fartherly bonding too, i carnt wait till my little ones are helping out 👍
@Danish1der 3 жыл бұрын
Loving the hidden screws on the corner detail.👍
@billywhizz98 3 жыл бұрын
Incredible nicely done that shed is built better than some houses
@wayne7071 3 жыл бұрын
Looking great , I’m interested how it’s going to look when it’s all finished .
@tonitaylor5485 3 жыл бұрын
Yeah good smell indeed 👃.... as usual great break down on the build ... even if someone has already thought of the hot glue the fact that Jo brainstormed that one out absolutely 🙌🏽 good one on her indeed and that spacer for the cladding especially the metal plate to secure the one so you can work the other *finger kiss* on that big 🧠 moment
@paulmoy9736 3 жыл бұрын
Nice job as usual......well explained.
@philipjones9297 3 жыл бұрын
That’s one nice looking shed 🍻👍
@aaronharris5275 3 жыл бұрын
Great hide and seek place for your girls! Looking good so far. I built my studio with sip panels and it worked out well. Two sheets of 11mm osb, 4 x 2 easi edge, 50mm Kingspan and moisture barrier as you have done. Then cladding on exterior and plastered the inside.
@TheRestorationCouple 3 жыл бұрын
Good stuff. We have SIPs designed into a future project. 👍
@maggiesue4825 3 жыл бұрын
You're doing a superior, job, as always!
@hythewoodworkdesigns 3 жыл бұрын
Brilliant build. Well done.
@WizsWoodwork 3 жыл бұрын
Winner dude, loving this project
@fredscott6022 3 жыл бұрын
Shocking for very easy guide to build a shed
@Mr_Ashley 3 жыл бұрын
great work as always. where did you get the feather edge planks from? i have a double garage i wish to clad to make it appear like a barn conversion. thanks you.
@ericfroment4065 3 жыл бұрын
could not have done it without her help mate :) she deserve more than most guy at work with me
@du7ch384 3 жыл бұрын
My only suggestion would be put the window where you had the shute if you needed to do it once, you'll need it twice! Just for ease of moving large materials in and out the shed or for storage just remove a hinged window when needed that's easy enough.
@THE-AIDEN-PROJECT 3 жыл бұрын
Interesting to see how you clad your shed, I done mine slightly differently but I'm behind on editing so I've got a couple more videos before I get to it. For anyone that's interested, I've started a barn conversion channel, head on over to see how I get on over the next couple of years 😊
@kenlovejoy2918 3 жыл бұрын
Is there a particular reason you wouldn't put the nail higher up such that the next board overlaps the nail holes to hide them from view / weather?
@mickd802 3 жыл бұрын
Nice job Subtle detail i did on mine was to rip a board to the overlap you are using, in your case 30 mm and use it on the bottom to kick the bottom board
@TheRestorationCouple 3 жыл бұрын
Good idea. 👍
@jwatkins123 Жыл бұрын
I think you need to bring the beard back Tim!
@xrayhead 3 жыл бұрын
Can you remember what size stainless ring shank nails you used? Some great tips on your channel, thanks for the uploads. 🙂
@pault5356 3 жыл бұрын
I would recommend treating the cedar to retain that beautiful colour. Wish I had on the cedar shingle roof I did, which has now turned grey
@lewisbrown51 3 жыл бұрын
Top notch stuff!!!
@geoffcooper6963 3 жыл бұрын
Nice one mate
@mrh4rrysingh 2 жыл бұрын
Hi, great channel and have been watching for a while now. Lot of great information. Could you do a video on which nails you used for your various jobs and a review of the nailers you use. I've been told to use stainless steel with round heads for cladding as the D heads may not hold enough? Again, great set of videos, looking forward to more.
@TheRestorationCouple 2 жыл бұрын
Clipped D head nails hold very well, and certainly enough for cladding IMO. Future video on nailers though. 👍
@geoffcooper6963 3 жыл бұрын
I love ur projects
@adamstockton67 3 жыл бұрын
You could buy one of these HIKOKI 4100400 NOSE CAP FOR NR1890. Got mine from Anglia Tool Centre there were very helpful
@davecharlesworth8176 3 жыл бұрын
Made it better with a thumbs up
@selbalamir 4 ай бұрын
Probably best to 3D print a custom nozzle for the nail gun instead of using hot glue. You can get exactly what you want then
@regthebackyardjackofalltrades Жыл бұрын
@-3:58 you say: “That Worked…” the. Did you say Machinist Mate? If so, it’s great to hear about people working other fields and building/construction as a hobby.
@vivaldi1236 3 жыл бұрын
Brilliant, as usual.
@boltaction8541 3 жыл бұрын
When you first buy a new nailer, they usually come with a rubber cap... first one I bought I threw it away because I didn’t know that it was for that exact purpose! We all learn sometime!
@edz7555 3 жыл бұрын
Shed envy...👌🏻
@jameshartley6486 Жыл бұрын
What are the corner pieces you have used please? I'm at that stage now deciding how to weather proof gapd from the cladding. Thank you
@1972piledriver Жыл бұрын
Nice work, I have a breeze block shed, is it ok to put foil wrap and then battens and then cladding?
@splitwagon 3 жыл бұрын
I quite likethe muzak Tim....
@amitdasor6171 9 ай бұрын
What is the cover strip that your using for any gaps, to cover any joints? You mentioned it in you video ...cover strip but what type?
@timbanwell1756 3 жыл бұрын
Were the fixings for the cedar stainless? I ended up using 50mm stainless screws from screwfix cos I couldn't find any decent nail options.
@TheRestorationCouple 3 жыл бұрын
Yes all stainless. 👍
@freds-shed 3 жыл бұрын
The ladt bug could have ruined it but she held on , true champ :)
@alibeck9568 3 жыл бұрын
Were did you get the feather edge cedar boards from?
@azzury42 3 жыл бұрын
hey.. was wondering which oakley sunglass model u are using?
@mofaz3475 3 жыл бұрын
The nails for the cladding, can they be placed higher up on the featherboard so that the overlap will cover them? or will this compromise strength too much as they're not in center?
@TheRestorationCouple 3 жыл бұрын
It makes the risk of the boards curling or lifting away much higher. By having them a third down you clamp the boards tighter to each other.
@stevebryce6071 3 жыл бұрын
Just curious Tim, having recently experienced this myself - have you ever had a complaint from a neighbour about making noise?
@benh1216 3 жыл бұрын
Most likely discussed any possible amount of noise and other details with his neighbour before he started the project. Also probably has a good neighbour that is understanding to start with! We are very lucky to have some understanding and friendly neighbours. Others unfortunately not so!
@ratchriat1716 3 жыл бұрын
there is nothing then building your own shed
@garethheathcote4988 3 жыл бұрын
Ratch Riat did you mean that there's nothing better than building your own shed?
@ratchriat1716 3 жыл бұрын
yes
@engincaglarofficial Жыл бұрын
Can i do only front of my shed cladding ?
@davidbanner9001 3 жыл бұрын
Good job as the American's say. Nice to see you got help from your daughter. Although don't let Health and Safety see this video. Children are no longer to be allowed to be children.
@graham-kirby 3 жыл бұрын
I am slightly confused about the concrete flooring. When you started the project you mounted the base on pillars, which appealed to me as I am about to start a similar build this year and would like to use less concrete for environmental reasons. However you have retrospectively poured a concrete base. What was the thinking in approaching this method instead of creating shuttering and pouring the base before the build, would the pillars not have supported the shed adequately?
@TheRestorationCouple 3 жыл бұрын
Just a change of planned use mid build. The post construction is a good option for a floorless shed and even if you ended up with a slab inside it, then thickness can be a bit less as not structural. As my blacksmithing gear will be in there plus a couple other workbenches I decided that a finished floor was a better option. In retrospect I would likely have shuttered the base and built stud work off, which is more like how the main workshop will be done next month.
@rjworld7122 3 жыл бұрын
Hi would love to no a break down of the price to build something like this
@davidjennings9253 3 жыл бұрын
Where do you buy all your timber in the Bath area please? Regards Dave
@rumelorbe6339 11 ай бұрын
Hi Mate, I am planning to do cladding to my shed. I am a newbie in cladding. May I know what is the minimum overlapping of cladding please? Thank you
@TheRestorationCouple 11 ай бұрын
At least 25mm but I usually do a little bit more.
@davecharlesworth8176 3 жыл бұрын
Sorry pressed the wrong thumb. I really really like this build
@rjamsbury1 3 жыл бұрын
Go and press the correct one then! 😂
@-_James_- 3 жыл бұрын
Nice one. My only thought is that I would have nailed the boards at the top, so the nails are covered by the next board. But that's just me. ;)
@TheRestorationCouple 3 жыл бұрын
Only one nail per board to allow movement, if only at top then the bottom wouldn’t clamp right. 👍
@-_James_- 3 жыл бұрын
Fair enough. :)
@ian_morg 3 жыл бұрын
Looking fab! I'm planning my own 12x10ft shed at the minute and the costs are mounting up, I was going to make it out of 3x2 framing for all sides, floor and roof with 1" ply floor, a bit less for roof, EPDM rubber roofing and overlap cladding but think I'm going to scale back a bit. Looking at that featheredge, it's got a great look and I'd save a few quid going that way. Is there any reason youve framed this like you have rather than the usual build each wall and screw them all together?
@TheRestorationCouple 3 жыл бұрын
No need for floor this way which was the original plan. Check last video for full explanation. I’d usually go off a slab or timber floor with studwork. 👍
@ian_morg 3 жыл бұрын
@@TheRestorationCouple watched the previous one a few times now and I saw you weren't going to go for a concrete floor to begin with so it was a agricultural design to start, I've watched a load of shed build videos and they all build each wall individually and then screw together (Colin furze used 4" posts in the corner like yours though) I like this method and it looks like I'd use a lot less materials but are there any downsides to doing it this way? Or is it just you were going with no solid floor and it just evolved.
@ian_morg 3 жыл бұрын
@@TheRestorationCouple just read the description on the previous post about being more of a stud wall fan 😎👍🏼
@TheRestorationCouple 3 жыл бұрын
Ian Morg ig I was building a field shelter or other garden structure I might but had I known I was going to do a slab I probably would have stud built.
@ian_morg 3 жыл бұрын
@@TheRestorationCouple Thanks for the replies 😎👍🏼
@chrismanville6642 3 жыл бұрын
Great stuff, what’s the backing track please.
@jameskirby5386 3 жыл бұрын
Hi, just looking at building a descent shed. Did you add the double sided tape to the breather membrane? Cheers
@TheRestorationCouple 3 жыл бұрын
It's integral to that product which is handy.
@jameskirby5386 3 жыл бұрын
@@TheRestorationCouple great, what make is it? Cheers
@TheRestorationCouple 3 жыл бұрын
James Kirby EasyTrim I think is the brand. I linked in the description to one version.
@jonseaton3695 3 жыл бұрын
Tim, was the cedar price correct? Very good value, what were the dimensions?
@TheRestorationCouple 3 жыл бұрын
150mm featheredge. It’s just UK grown cedar but great stuff. Works out around the same price as treated featheredge or a little less. I picked it up at our local mill, Charltons.
@royalstevep68 3 жыл бұрын
Your gun nailer. I found a compressed air gun nailer was better. Obviously disadvantage is you need a compressor, noise of the compressor when on, but the tools are cheaper and better than cordless ones imo.
@ForPropertyInvestors 2 жыл бұрын
Can weatherboards be sloped downwards on an angle?
@clausiusuf 3 жыл бұрын
Cat like reflexes @9:17
@brummiepcgamer568 3 жыл бұрын
nice to see prince harry buiding a shed
@isyt1 3 жыл бұрын
What is the purpose of the battening? Could you not just clad on top of the membrane? Or do you need an air gap or something?
@calebfuller4713 2 жыл бұрын
His framing method is... interesting... put it that way. Horizontal cladding needs vertical supports at 400-600mm as he said, which his frame doesn't provide. There is a building style that uses battons on top of membrane (probably on top of ply sheathing) which is for the ultimate water-resistant system, especially in places that get lots of condensation or temperature extremes.
@darrensykes5997 3 жыл бұрын
Tim, great work, can I ask you which nail gun do you use and why, I'm in the market for one myself.
@TheRestorationCouple 3 жыл бұрын
Links in description. It’s the Hitchi, Hikoki one. 👌
@adamstockton67 3 жыл бұрын
@@TheRestorationCouple Soft tip for this nail gun HIKOKI 4100400 NOSE CAP FOR NR1890
@TheRestorationCouple 3 жыл бұрын
adam stockton thanks. Yes had seen that one but figured I would rarely need it, hence the half a job glue gun route. 👍
@cesarsalasliendo7481 3 жыл бұрын
@@TheRestorationCouple ,español..porfavor ..gracias
@MrSSlice 3 жыл бұрын
Have you got a video of the door build mate?...im literally copying your exact build
@redneckgoatfarmer 3 жыл бұрын
Just bought 3 pieces of 8” cedar beveled lap siding 8 feet long. It cost 110.00 or 4.50 a board foot. You must have 3K in siding here.
@TheRestorationCouple 3 жыл бұрын
£200-300 max all in I think.
@calebfuller4713 2 жыл бұрын
I used the widest rough-sawn fence palings I could get. Discard or cut down a few that were too knotty, and it still works out WAY cheaper than "proper" cladding.
@oddsandwindsocks5905 3 жыл бұрын
Nice job, we want to do a shed in cedar t n g . Any ideas for cost please
@TheRestorationCouple 3 жыл бұрын
Depends on what cedar but if clear imported stuff then £50 m2 plus probably.
@oddsandwindsocks5905 3 жыл бұрын
@@TheRestorationCouple thankyou
@johnl.7582 3 жыл бұрын
Not a big fan of the unsupported membrane. Air pressure differences are going to destroy that over time, and I'm not sure that butting insulation against it is a great idea either. OSB sheeted studs on a poured base would have made this project so much easier!
@kylemccann 3 жыл бұрын
What nail gun did you use, is it a finish nailer or first fix?
@TheRestorationCouple 3 жыл бұрын
First fix.
@kylemccann 3 жыл бұрын
@@TheRestorationCouple nice one thanks!
@DP80s 3 жыл бұрын
How was your 45x45 corner piece fixed please?
@TheRestorationCouple 3 жыл бұрын
Screwed in through battens so hidden screws.
@JezVibert 3 жыл бұрын
A good tip from Robin Clevett is to secret fix through the edge of the battens into the corner post first, then fix the corner assembly to the building through the face of the battens
@hsimpson6581 3 жыл бұрын
When i saw the thumbnail i thought he was Ned from the try guys . I was so confused wondering why he was building a shed ?? Then I click and it is Tim and was oH This now makes sense now. lol I do like Til with longer hair the hair makes him look Younger.
@legglesskezza 3 жыл бұрын
What local sawmill did you use?
@TheRestorationCouple 3 жыл бұрын
Charltons for the cladding, usual merchants for the frame.
@malvarado5955 3 ай бұрын
🎉
@okcantbelieveit294 3 жыл бұрын
As my wife says it’s a nuisance running out of energy at the critical moment. 😁
@ins1337 3 жыл бұрын
red hot chilli peppers huh ^^
@nurhafizahbentmuslimen7259 3 жыл бұрын
What is the purpose of leather membrane? This is my first time to see this, Philippines
@WizsWoodwork 3 жыл бұрын
Could you do a run down on costs?
@TheRestorationCouple 3 жыл бұрын
Will do once it’s done. 👍
@ianbird4737 3 жыл бұрын
It's rather too late to suggest this but ... Instead of a single door fit a door-and-a-half. Think of an inward opening pair of French doors where one dor is full size and the other about half the width. The half door has shoot bolts and most of the time stays locked shut. However, when you want to get something larger in (or out) the extra width is a real boon. I saw this on a very large shed on a house in France which otherwise would have had an enormously wide door to get the ride-on mower out, but a very wide door is otherwise a serious inconvenience.
@klaeLIFE 3 жыл бұрын
I did exactly this on the second shed I built. So helpful.
@wgoconnor33 3 жыл бұрын
When did you grow the beard ? I haven’t missed any episodes
@googleaccount3555 3 жыл бұрын
you are starting to look like TheWoodedBeardsman ;)
@keanMechanic 3 жыл бұрын
Could I ask what nails you used? “ stainless ring shanks” a link would be good thank you.
@TheRestorationCouple 3 жыл бұрын
50mm stainless ring, can't remember the brand, either bull dog or champion I think.
@salsolo2403 3 жыл бұрын
tims ocd working overtime lol
@vivaldi1236 3 жыл бұрын
salsolo: Not so much. If you want to see real OCD, go to 1806 Stone House. (Retired Licensed Clinical Psychologist)
@beplh5242 3 жыл бұрын
82p per m for cedar, they must really like you
@TheRestorationCouple 3 жыл бұрын
List price. 👌
@spencerjuk 3 жыл бұрын
Where from? I need some for a shed build too!
@shedlife1783 2 жыл бұрын
Random Q: What Oakley's are you wearing?
@njuham 3 жыл бұрын
Perhaps a silly question but what is the structure/method with the bottom row of cladding to close the gap to keep rodents out?
@TheRestorationCouple 3 жыл бұрын
Next video, I ended up doing concrete but lots of ways you could do it, whether board or mesh.
@jixuscrixus1967 3 жыл бұрын
I thought Prince Harry was back from LaLa Land and had finally got a job in the building industry!
@brandonbippus37 3 жыл бұрын
Why the time lapse
@idandidnt 3 жыл бұрын
Okay. Dilf vibes.
@fireblaster9961 3 жыл бұрын
Try waxing the ends of boards to prevent future cracks, I’ve used surf board wax before, adverts killing theses vids
@TheRestorationCouple 3 жыл бұрын
KZfaq have now inserted mid video ads across all videos now since last weeks change up. I will turn off when possible though.
@clothedwiththesun 3 жыл бұрын
“ You holding it ??” “ Yeah, there’s a lady bird!” And 28 dislikes ?????????????
@russellbarlow3616 3 жыл бұрын
Just a tip for future. You are supposed to put the nail at the top so when you put the new board on top it hides the nail. It also hopefully stops nails from getting rusty (i know you used stainless)
@TheRestorationCouple 3 жыл бұрын
Not usually how you would do featheredge cladding like this. Nail needs to be just above the board below to clamp it tight with one per board. If you only did the top you would likely have gaps opening up below each board.
@MarkSherwen 2 жыл бұрын
@@TheRestorationCouple thanks for that, I'm about to do a 20' x 8' with a central partition. I was wondering the same about the nails and can see why you'd do it the way you have. I'm thinking of going with vertical cladding instead of horizontal as it will save having to have a join due to the 20' length.
@doctorlove2022 3 жыл бұрын
Way way way to many adverts now Sorry had to subscribe Enjoyed it while it lasted
@TheRestorationCouple 3 жыл бұрын
Blame KZfaq. They changed things automatically last week. I will look to see what I can thin out. 👍
@captainbarnes923 3 жыл бұрын
@@TheRestorationCouple Tim that was going to be my gripe too. Glad you plan to do something about it. Good luck!
@ThisOldManOfTheSea 3 жыл бұрын
How weird. I’ve just watched it (in UK) and only 1 skip-able (Amazon) ad at the beginning - no others appeared so maybe it’s a geography or device issue (I watch on an LG TV using the inbuilt App).
@TheRestorationCouple 3 жыл бұрын
Any video over 8 minutes will now default to mid video ads. I’ll try and turn off for first few weeks, that way it won’t affect subscribers.
@johnroberts6251 3 жыл бұрын
Only had two quick ads only lasted a few seconds before I could skip them!!
@alcopley7684 3 жыл бұрын
Is that Prince Harry?
@CB-zr9fi 3 жыл бұрын
Bet your neighbours are at their whits end with all the noise you create messing about.
@TheRestorationCouple 3 жыл бұрын
??
@klaeLIFE 3 жыл бұрын
I wouldn't call it messing about. Doing things yourself is very rewarding, more people should do it. When my neighbours use power tools and such like I'm always wondering what they are making rather than complaining about noise,
Braincatchers
Рет қаралды 13 МЛН
The Restoration Couple
Рет қаралды 217 М.
Robin Clevett
Рет қаралды 153 М.
The Restoration Couple
Рет қаралды 97 М.
CRYSTAL HAIR
Рет қаралды 3,9 МЛН
Sergio Outdoors
Рет қаралды 29 МЛН