CNC 63 ATC with JGL 80

CNC 63 ATC with JGL 80 - 2.2kW

Рет қаралды 54,928

flyingchrisRC

6 жыл бұрын

First try with 6 different tools.
G-Code: Fusion 360
Software: Mach3
Spindle: www.jian-ken.com/automatic-pne...

Пікірлер: 111

@notthomasharrell 4 жыл бұрын

When I finally have space for a larger machine, I'm wanting to build in a similar tool change application. 4'x8' machine with a wider axis to allow a 4th axis on one edge and tool change on the other. It's great to see it in action.

@forrestgumpv9049 4 жыл бұрын

You need to add a G04 X50 to your tool change MACRO to give it more release time at tool drop point. Man , I really like your setup and programming speed of cut. Great Job !! You have easily beat every video on KZfaq. I'm a cnc machinist 40yrs now and I am impressed.

@ContractCAD 3 жыл бұрын

Slow the video to 0.5x to see it in real time. Still cool, but not quite as dazzling.

@Flybrei 5 жыл бұрын

Nicht schlecht.👍 Respekt

@andysworld4418 5 жыл бұрын

ist toll geworden👍

@tbfanling2787 5 жыл бұрын

very nice changing head

@airgunningyup 5 жыл бұрын

the machine looks incredible

@flyingchrisRC 5 жыл бұрын

Thank you so much. Now it is even better. :)

@haansworsie 4 жыл бұрын

@@flyingchrisRC What CNC are you running here? , I do recognize the Spindle

@flyingchrisRC 4 жыл бұрын

@@haansworsie hi Christopher, the machine is DIY, but the spindle is a JGL 2.2kW ATC Spindle.

@Nick02021991 5 жыл бұрын

Nice spindle :)

@wmt16 6 жыл бұрын

Fetter Daumen hoch! Klasse. Wenn ich blos mal in den Quark kommen wuerde :-)

@YannPomarede 5 жыл бұрын

Pretty impressive acceleration settings! It moves fast!

@flyingchrisRC 5 жыл бұрын

Thank you. My Spindle works still great after two years of milling.

@YannPomarede 5 жыл бұрын

flyingchrisRC great to hear that he spindle is still working good. By the way, can you give me your acceleration settings in m/s^2 ?

@MakeTechPtyLtd 4 жыл бұрын

@@flyingchrisRC well done. Can you give me advice about setting up the wine rack tool change? Maybe Yann has a suggestion as well. Thanks

@MakeTechPtyLtd 4 жыл бұрын

@@YannPomarede please see my comment above.

@flyingchrisRC 4 жыл бұрын

@@MakeTechPtyLtd What do you wann know exactly?

@jendarstudio3067 3 жыл бұрын

Nice rapid rates! Would you mind sharing the model number of your stepper/servo motor

@skylerlabsing.4028 3 жыл бұрын

Do you use servos and what kind. Also how did you tune the gantry servos if you use 2 on one axis? Thnx.

@splint3048 2 жыл бұрын

Awesome. I have the JGL 100 spindle, Pokeys57cnc and Porelay8. I plan using the Porelay8 to control the pneumatics for the tool changer, retractable probe, vacuum table, air nozzle etc. I'm bit lost on how to get Mach to send signals to the relay board. Are you able to share any resources which may help? Thanks

@murrayedington 5 жыл бұрын

Swarf all over those exposed tool tapers! You need to devise some form of screen to protect them.

@caseycappoen251 4 жыл бұрын

Agreed, it's wood tho.

@robpierce3914 4 жыл бұрын

It would be enough to blast high pressure air through the tool taper while the draw bar is opened. that will clean the swarf off the tools before insertion.

@leversole01 4 жыл бұрын

I built a belt drive CNC and have been using it for about three years...I am in the process of designing a new machine with ball screws and ATC...can you send some pictures of your machine? I like the design very much.

@papaserver1678 3 жыл бұрын

What is CNC model? Regards

@bransonlariscy4660 5 ай бұрын

Is this the JGL 80 2.2 r24 or r30? I was wondering what VFD you use? the r24 needs 800hz to run it. Any information would be appreciated.

@bsproduction4054 4 жыл бұрын

Hello, extremely nice Maschine, is it possible to get the cad Data of the Maschine, I want to Bild a similar one and think it would help me if I have an good example.

@TheSpawaczRider Жыл бұрын

Hi How is that spindle holding up over the years ?

@divyeshdodiya7853 11 ай бұрын

Hey can u tell me, I want to know your tool holder gripper (black) , company name i want to buy that black gripper

@armandoortizlira6552 Жыл бұрын

Hello my friend, do you sell the macro that you use?

@wasimakram837 5 жыл бұрын

nice video...which control software are you using

@christoftittel431 5 жыл бұрын

Hello wasim, I generate the machine code with Autodesk Fusion360 and Mach3 post processor. To controll the cnc router, I am using Mach3 with german screenset.

@matteyles7466 3 жыл бұрын

Cool stuff, Could you show some detail of the pneumatics for the tool changer? I have the same spindle but I am a bit lost.

@flyingchrisRC 2 жыл бұрын

Hi Matt, I just use some electric Solenoids for Atc, Duft removal and seal air.

@pasandoelpaso Жыл бұрын

Hello Could you please send me the installation manual, especially how to connect the temperature wires, the cone placement control wires 11 and 22 are already connected. But the temperature one, I do not know the exact measurement. I do not know what type of sensor to connect. Thank you and good day

@Madhack2004 3 жыл бұрын

NIIIICE

@JDesignSwe 4 жыл бұрын

looks nice, where did you get the mounting brackets for the spindle?

@flyingchrisRC 4 жыл бұрын

Thank's, they are cnc milled on a big industial cnc machine.

@spheattreatment 2 жыл бұрын

👍👍👍👍👍👍👍

@evomann1692 6 жыл бұрын

Ich bin begeistert.

@martinkuhlwein5525 3 жыл бұрын

Na ja schau dir mal den WZW an da verbiegt es ja alles!!

@danielminskey 5 жыл бұрын

where did you get the slotted top for you cnc. did you mill it after you installed it...looks great

@flyingchrisRC 5 жыл бұрын

Hello Daniel, These are some normal aluminium profiles stacked together. I got them here: www.alu-profil-technik.de/product_info.php/info/p3_aluprofil-nutplatte-montageplatte-15-x-120--nut-8-b---raster.html/XTCsid/3j1fa5hcoapr221l13bnjq2g03 I did not milled them afterwards.

@stefankrimbacher7917 Жыл бұрын

Wo bekommt man die Spindelaufnahmen ISO 20?

@rok1475 5 жыл бұрын

Did you build this machine to get into micro manufacturing or just for fun of doing it?

@flyingchrisRC 5 жыл бұрын

Hello Robert, I have built the cnc router to mill parts for my model airplanes and drones. I also use it to make moulds.

@ipadize 3 жыл бұрын

which inverter do you use with this spindle?

@flyingchrisRC 3 жыл бұрын

2.2kW VFD 400Hz 230V from Ebay. (20.000rpm)

@JShel14 2 жыл бұрын

Any idea how much the spindle weighs? It's weird they don't have any weights listed on their Alibaba store.

@dakotajohnson4229 Жыл бұрын

The brand is Jianken and their website has the weight at anywhere between 7.8 to 8.9 kgs.

@crumantapete8156 5 жыл бұрын

Hi wie hast Du denn die pneumatischen Anschlüsse verbunden. Lock und Blow ist klar, aber der "Air return"?

@flyingchrisRC 5 жыл бұрын

Hallo Adrian, Air return ist einfach die zurückgeführte Luft vom Pneumatikzylinder des Werkzeugwechslers. Ich habe einfach ein Stück Schlauch angeschlossen, der in der Schleppkette endet, damit kein Staub, bzw. keine Späne hinein gelangen können.

@svenkrause3433 5 жыл бұрын

@@flyingchrisRC Falsch....

@flyingchrisRC 5 жыл бұрын

Hallo Sven, was ist dann der Anschluss?

@CNCPRINTBLOGSPOT 4 жыл бұрын

nice but why the Tool #1 was so torn down at 1:05 min? regards

@flyingchrisRC 4 жыл бұрын

It was a First try setup with some incorrect tool place coordinates.

@CNCPRINTBLOGSPOT 4 жыл бұрын

@@flyingchrisRC ah k i had the same issue in the upside direction, it was a lucky Situation, that the tool was driven inside after turning the spindle on and not thrown towards me

@deanrichards9541 5 жыл бұрын

Great setup. I am looking at buying the same spindle and just wonder how many tool holders came with the spindle. do the tool holder rack clamps come with it as well?

@flyingchrisRC 5 жыл бұрын

Hello Dean, There came only one ISO20 ER16 with the Spindle. But the tool holders and tool clamps are bearly cheap. You can get them from Aliexpress or Ebay.

@deanrichards9541 5 жыл бұрын

@@flyingchrisRC Great, Thanks. What centre distance do you have between tool holders on your rack?

@flyingchrisRC 5 жыл бұрын

@@deanrichards9541 I have got 80mm center distance between the ISO20 holders. But it could be less with an other spindle holder. So I could use 12 tools with my cnc router.

@deanrichards9541 5 жыл бұрын

@@flyingchrisRC Thanks again. Just one last question if you dont mind, are you using ER16 or ER20 collets. I just realised the supplier is selling with ER16 but I need ER20. Not sure if we can order the same spindle motor but with ER20 collets.

@flyingchrisRC 5 жыл бұрын

@@deanrichards9541 I also use ER20 for bigger endmills. I even have a 20mm face milling cutter used with the spindle. Works great if you don't push to hard 😅

@bsproduction4054 3 жыл бұрын

Hallo, Hast du die Führungsschienen direkt auf das Alu Profil geschraubt oder wurden die Flächen überfräst oder anderweitig begradigt? Mfg Bastian

@flyingchrisRC 2 жыл бұрын

Hallo Bastian, sind direkt verschraubt. Ich hatte leider keine Möglichkeit zum überfräsen.

@ravenmooore 4 жыл бұрын

How'd you get the ATC to work? Is this cnc a set?

@flyingchrisRC 3 жыл бұрын

The machine is home build. Software for ATC is Mach3

@mertcapkin7263 6 жыл бұрын

Are you happy with this spindle? Still working good?

@christoftittel431 5 жыл бұрын

Hello Mert, the spindle is awesome. No problems at all. The spindle is very quiet and powerful. I use it now for a year without problems :)

@olajideoyekunle9044 4 жыл бұрын

How much did it cost please? Thank you.

@TheSlavascorp 3 жыл бұрын

What the type of CNC controller use?

@flyingchrisRC 3 жыл бұрын

Pokeys57cnc

@andysworld4418 5 жыл бұрын

hallo chris. tolles setup. ist die cnc maschine von sorotec? wann ja , weelche? grüsse, andy

@flyingchrisRC 5 жыл бұрын

Hallo Andy, danke, die Fräse ist selbst konstruiert und gebaut. Hat ca. ein Jahr gedauert. Ich habe mich dabei an der Sorotec AL Line orientiert. LG Chris

@Exorzist666 5 жыл бұрын

@@flyingchrisRC Okay sehr cool! Gibt es Pläne dafür ? würde auch gerne eine bauen... wie sind die Maße? Stellmaße und verfahrweg? Was hat der Spaß so grob über den Daumen gekostet? Ich hoffe du teilst die Pläne oder verkaufst ggf auch. LG

@flyingchrisRC 5 жыл бұрын

grabcad.com/library/3-axis-cnc-machine-cnc-63-1

@joecnc3341 9 ай бұрын

Awesome machine and video - can you post your M6 Tool change macro?

@wuwutastisch4964 3 жыл бұрын

Sind da Kugelumlaufspindeln mit 5 mm oder 10 mm Steigung verbaut?

@flyingchrisRC 2 жыл бұрын

10mm Steigung auf X und Y.

@maximiliansonntag6040 5 жыл бұрын

How much did you pay for this spindle? I'm interested in investing in a nice spindle as well.

@flyingchrisRC 5 жыл бұрын

Hello Maximilian, I bought it on Alibaba. Check the link out: german.alibaba.com/product-detail/jgl-80-2-2kw-30000rpm-500hz-iso20-water-cooled-atc-spindle-motors-for-engraving-machine-tool-60631520548.html

@Remyeijssen 4 жыл бұрын

@@flyingchrisRC how much did you pay for it approximately? just to know if it is even worth it to send an invoice.

@flyingchrisRC 4 жыл бұрын

@@Remyeijssen it was about 1300€

@Remyeijssen 4 жыл бұрын

@@flyingchrisRC ok thanks, fair price i think so.

@kurtbilinski1723 Жыл бұрын

To anyone thinking of getting an ATC spindle, be aware that the ATC option adds about $1000 to the price - no kidding.

@tedbear2478 5 жыл бұрын

Was hast du da für Material genommen zum bearbeiten? Ich brauch genaus sowas zum meine model prototypen zu fräsen? Wär dir echt danbar wenns mir veraten würdest😁

@flyingchrisRC 5 жыл бұрын

Hallo Ted Bear, das Material heißt Ureol und ist einfach ein Kunstoffblock. Gibts von Sika.

@tedbear2478 5 жыл бұрын

@@flyingchrisRC cool, die oberflächen sehen echt toll aus bei deinem teil. Weist du ob man ureol macher direkt zum abformen mit Polyurethane brauchen kann?

@flyingchrisRC 5 жыл бұрын

Danke, nein, die Oberfläche muss man bei mitteldichtem Ureol 2K grundieren und 2K lackieren. Bei hochdichtem ureol kann man die Oberfläche gleich aufpolieren und abformen.

@tedbear2478 5 жыл бұрын

@@flyingchrisRC ok cool dank dir viel mal für den tip😉