Cuban Link chains - CAD, 3D Printing & Metal Casting using Bluecast X One

Рет қаралды 18,667

Жыл бұрын

3D Printing and Metal Casting and Cuban link chain in situ... it can be done!
Cuban chains are always popular but not everyone has a jeweller's talent. But anyone can 3D print and that's the place to start!
I designed a Miami-ish Cuban Link using ZBrush and printed it using Bluecast X One resin. I then cast it in situ... but would the links all melt together? Well, I guess that's down to how well I designed it 😁
🔹 LEARN ZBRUSH AND GET $100 OFF THIS COURSE 🔹
Watch my review video of this amazing course • BEST ZBrush course ava...
Follow this link ▶ bit.ly/38nDb2z and enter the Coupon Code VOG
Your amended price should appear 😊
SUBSCRIBE for more tips, guides and fun projects
youtube.com/@vogman?sub_confi...
🔹 MY LINKS 🔹
▶ vogman.co.uk
▶ / thevogman
▶ / the_vogman
▶ rumble.com/c/c-2100620
▶ vogsmerch.myspreadshop.co.uk
▶ etsy.com/uk/shop/VegOilGuy
▶ / vegoilguy
💚💚💚 PLEASE SUPPORT THIS CHANNEL 💚💚💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 / vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 www.vegoilguy.co.uk/donations 😁
🔹 DISCLAIMER 🔹
The opinions stated are my own, based upon my observations of items I have actually reviewed. I cannot form judgements about items I have not seen.
This video is for and educational and entertainment purposes. Do not try and replicate what you see here without proper equipment, safety gear and a thorough understanding of the processes involved. It is a VERY dangerous.
#3dprinting #lostresin #metalcasting
#vegoilguy #vog #vogman

Пікірлер: 105

@ShapingSilver Жыл бұрын

As proof of concepts goes, it doesn't get any better than that. Casting chains have been done for some time, but doing the entire process at home is impressive. Nice one buddy! 👍

@vogman Жыл бұрын

Thanks buddy. It was fun 😁

@timtrantow1979 10 ай бұрын

Id love to see a better breakdown of how you did the chain in Zbrush.

@FrederickJamesPitsea Жыл бұрын

We did this exact process with a tulip bracelet! It was successful but there was definite room for improvement. Thanks for the pointers, much appreciated

@scottcaley6555 Жыл бұрын

VOGMAN what a groundbreaking and beautiful result! Kudos also on perfectly applying the new PepeTools sander in this project. Thank you for taking us with you on this journey! ❤

@vogman Жыл бұрын

Thanks Scott for the kind support. I'll be honest, with my limited skills, I'm not sure I would have had the patience to do this without the mini sander. It made light work of an otherwise fiddly job.

@RoseKindred Жыл бұрын

Wow, I know how to make these by hand (I am not good at it, just wanted to try) but never thought to try to forge one. I love how you incorporated the normal "wax sprue" into the design model. I envy people like you who can model what is in your head, I have to see/touch something in order to model it.

@vogman Жыл бұрын

I'm still learning CAD if I'm honest. I enjoy it, but I marvel at the talented of those that make it look easy. I also marvel at the talent of anyone who can make a Cuban the proper way 😁😁😁

@ahammedtechnology3231 Жыл бұрын

Please Cuban chain video full review

@ncvidman Жыл бұрын

Thank you for another great video. I like that you showed the failed casting as well as the successful one.

@vogman Жыл бұрын

It was a learning opportunity so it needed to be shared 😁😁😁

@spongeknock7387 Жыл бұрын

Awesome you’ve come along way with your 3D design and casting over the years 👍

@vogman Жыл бұрын

Many thanks. We all get better with practice. 😁

@B4IRUTUARU16 Жыл бұрын

I love these videos. Don't pay attention to the haters.

@choschiba Жыл бұрын

What an incredible looking result!

@PencilParasite Жыл бұрын

Every time I see these videos you make me want to buy everything needed for metal casting, too bad I can't do it because I live in an apartment building. Still waiting for the video on my fellow villagers of the Bluecast.

@tudesomer-chu1219 Жыл бұрын

Mini Vogman has more bling than me!

@vogman Жыл бұрын

You should see his choice of evening wear....

@ibz0991 Жыл бұрын

Thank you for bringing me here Tu!!!

@tudesomer-chu1219 Жыл бұрын

@VogMan is that who you make all the jewellery for?

@vogman Жыл бұрын

Mini Vogman? Yes. But he pays with resin tokens.

@cerberes Жыл бұрын

Brilliant work

@awldune Жыл бұрын

Great to see a project video from you! The result is amazing

@vogman Жыл бұрын

Thanks for watching 😁

@alfabsc Жыл бұрын

Thanks for sharing your experiences in casting a chain. If you are going to wear it on your wrist, you probably need to cast it as a open chain, and then get a clasp and jump rings from Rio Grande to finish it. They probably have items that are the same metal as your cast. I enjoy all of your reviews and demonstrations.

@vogman Жыл бұрын

I can cast the appropriate fittings on the ends, or cast an open link to manually attach. It has great potential to some I'm sure 😁

@alfabsc Жыл бұрын

@@vogman Your solution will be the best, I'm sure.

@giuseppe4909 6 ай бұрын

Outstanding

@mplatinum 17 күн бұрын

Amazing work, Guy's ❤🎉

@vogman 16 күн бұрын

Thank you so much 😀

@davidkomai Жыл бұрын

Very cool! Id love to see more articulated projects.

@madengineer9072 Жыл бұрын

That is amazing and the results look great.

@vogman Жыл бұрын

Many thanks 😁

@medyk3D Жыл бұрын

Superb results. Great work especially for the one who is good at being lazy :)

@vogman Жыл бұрын

Gotta be lazy. Work smart, not hard 😁😁😁

@checkmatefurries286 Жыл бұрын

This is dope

@kennyaymerich9989 Жыл бұрын

Just wow🎉

@vogman Жыл бұрын

Thanks Kenny 😁

@jeffhulett4194 Жыл бұрын

Looks fantastic, it’s an expensive hobby but I’m still going to have a go at it.

@theghost1920 Жыл бұрын

That actually looks amazing, well chuffed with how it came out! Keep up the good work buddy!

@vogman Жыл бұрын

Many thanks 😁

@Annonymous0283745 Жыл бұрын

Amazing proof of concept. Once I get my Al bronze mixture just right (getting that stuff to wet out is interesting) I want to try some articulating pieces.

@cptrikester2671 Жыл бұрын

I sure like your articulating castings. Very well done.

@vogman Жыл бұрын

Many thanks 😁

@johngrant5749 Жыл бұрын

Excellent job 👍

@vogman Жыл бұрын

Thanks John 😁

@LeaOverAtVatic Жыл бұрын

gosh you're genius

@vogman Жыл бұрын

You're very kind, but honestly it's a very simple concept 😁

@EJTechandDIY Жыл бұрын

I will love for you to make a video on how to get started and hardware recommendations that will not break the bank. This looks amazing well done.

@vogman Жыл бұрын

You need to look at some of my older stuff. This video will give you an idea. There's cheap DIY versions mentioned. kzfaq.info/get/bejne/p96aaMiG0KeqhX0.html And whilst it talks about Lost PLA, the same thing applies to Castable Resin 😁

@johnmccanntruth Жыл бұрын

Very cool!

@vogman Жыл бұрын

Thanks John

@catnamestaken Жыл бұрын

Fantastic

@vogman Жыл бұрын

Many thanks 😁

@tweedrhino Жыл бұрын

Mind sharing the casting and flask temps you used for the bad and good cast?

@JonasNeumann6 Жыл бұрын

The possibilities are endless, you could cast a rattlesnake rattle pendant with that

@Gocast2 Жыл бұрын

people actually didn't believe you cast that mindblowingly awesome dragon chain?!? 🤨 I'd take that as a compliment 😂

@vogman Жыл бұрын

I had one guy write and say he was going to report me to KZfaq. I told him I still had the casting so he was welcome to do so. I guess some people just don't understand the possibilities 3D printing have presented us with 😁

@0ADVISOR0 Жыл бұрын

You're the bomb

@davross_au Жыл бұрын

Very interesting indeed :)

@vogman Жыл бұрын

Many thanks 😁

@emilianofisanotti9639 Жыл бұрын

@Vogman, if you want to cure parts that are hard for light to reach through air (common curing way), then use a water container to submerge the part in water and then light up the container using a UV light reflector to cure the part there. Water is a really good medium for light to travel through:) I'm sure I'm late to the party with this comment, but if I'm not, I really hope it works for you:) Top videos as usual!!!:)

@vogman Жыл бұрын

Many thanks, but be careful with water and castable resins. Not all of them get on well with water and that can lead to poor castings 😁

@emilianofisanotti9639 Жыл бұрын

@@vogman Oh!!! I don't do castable stuff so I didn't know that!!! I keep learning stuff in this channel!! Thanks man!!! Also, love the humour

@tonywharton5220 Жыл бұрын

I'm so impressed with the outcome. Any Mexican chains coming soon? I see you use a different flask than normal. What's the difference apart from the holes please?

@TurdFergusen Жыл бұрын

Ive been wondering the same thing lately!

@vogman Жыл бұрын

If you can print it, you can cast it 😁

@dsdellinger Жыл бұрын

Fantastic! I'll be looking at doing something like this at some point, I'm sure. Love your videos. I've used your videos to get myself set up for casting and am having a bit of trouble getting a good seal on the Kaya Cast in the casting chamber side. Arbe is sending me replacement gaskets to see if that's the problem, but I was wondering if you had any tips for getting a good seal on that casting chamber side.

@TurdFergusen Жыл бұрын

I've seen people push the flask down with the tongs to get the seal, did you try that? Also make sure there are seals between each spacer.

@meeko81g39 Жыл бұрын

nice work mate, what burnout cycle did you go with for this ?

@yungjohnson76 8 ай бұрын

Nice I’d love to have that file

@AFV85 Жыл бұрын

Amazing absolutely love your channel! I just got my mono 2 this morning so it's set up time now I was just wondering about the 3.0.2 software slicer with it I bought the mono 4k about 3 weeks ago but needed a second and love my 4k so with that mono 2 being on promotion price both mono 2 and wash amd cure for £199 I grabbed one! As of today it's that just for the printer or £338 for both so saved £100 it's a spare wash and cure anyway! OK what I was wondering was the 4K slicer I installed can I keep that going as well as the new mono 2 version I'm away to install or will I need to use the same one and change the settings everytime? It might not be an issue as use lychee now for the mono 4k all the time I'm getting good test prints in the validation test matrix but the right sided slider up the sode I'm still getting the step lines! Have you Any tips on how to get them gone or near gone?

@HarrisonNewts 8 ай бұрын

Just wondering now it's been over 2 years since you brought your auto tool melting furnace hows it holding up? Is it still heating to the same temputures and is it durable still?

@FenWolf Жыл бұрын

Has Anycubic contacted you to review their new Photon Mono M5s?

@megaxecutioner2613 Жыл бұрын

I've always wanted to cast something like this but shrunk to ring size.

@MrOsvel82 9 ай бұрын

@VogMan would this be a compatible resin for my elegoo mars 3 pro?

@UnratedPlayer21 Жыл бұрын

Do you have a course where you are teaching how to create those files? Cheers

@okygultra8944 11 ай бұрын

WOW! looks beautiful!! I cant tell whether its a plated chain or 100% bronze, I'm really new to this! please clarify for me?

@vogman 11 ай бұрын

This is purely bronze. It shines up very nicely, though it will tarnish over time 😁

@grillzbytroy8870 Жыл бұрын

Amazing. I tried a file off of ch trader and were fused. Elegoo mars pro not the 2nd one siriya true blue cast. Would love someone who uses my exact machine to chime in on better settings. Vog love your videos been watching for few years now❤

@vogman Жыл бұрын

Many thanks 😁

@javziovaldez3024 Жыл бұрын

Hey big I have a quick question . Do you need an expensive computer to run the cad or the slicer program ?

@b.j.880 6 ай бұрын

How small were the gaps between each link? If you don't mind telling me, of course. I've been trying to cast a similar piece but im worried i'm working with tolerances a bit too tight (about .25mm).

@ReefReview Жыл бұрын

Oh yea

@vogman Жыл бұрын

👍👍👍

@jabapiper 9 ай бұрын

anyone have a link for the cuban file? or does vog have the file somewhere for download?

@rajathpawaskar 9 ай бұрын

Hello please suggest me best resin 3d printer for jewellery work on a budget

@vogman 9 ай бұрын

Here you go. Look at this. www.vegoilguy.co.uk/3d-resin-printing-jewellery.php

@cedricjones6713 Жыл бұрын

Is that the only resin you can do that with ?

@vogman Жыл бұрын

For this process I'd recommend a resin that doesn't need curing. X One is a good choice. Power Resins do a few, but they're double the cost.

@hk6562 11 ай бұрын

Quick question do you prefer this to the Siraya tech resin? Hopefully I win a free bottle hahahah but if I don't which one would you buy?

@vogman 11 ай бұрын

99% of my casting is done using Siraya Tech cast. It's affordable and you get a nice big bottle for your money. It prints very well and it casts beautifully. However, sometimes alternatives are needed and Bluecast X One was perfect for this situation. I hope that helps.

@hk6562 11 ай бұрын

@@vogman Thank you so much that's why I'll always keep watching your videos, I love your honesty!

@Hicham-zo3bp 4 ай бұрын

Sorry may bé IAM dump but thé loops of thé chain will stick to getter to make them solid and not moveable

@Hicham-zo3bp 4 ай бұрын

Can any one explain it to me please thanks you

@rauugarciteru1469 Жыл бұрын

The machines to make Cuban chain have been around since 1980, they are much faster than in 3D, in addition to the quality, hardness and final finish, is much better. There are many things where 3D printing is NOT competitive.

@rickstard73 6 ай бұрын

He's obviously not a jeweller, hobbies are not about productivity 😊

@robc26 4 ай бұрын

Bullshit

@vogman 4 ай бұрын

Are you? Don't run yourself down like that.

@robc26 4 ай бұрын

@@vogman am I what homeboy? Was calling bs to the concept and its viability, not your skills or the final product.

@JOE_GOMEZ777 Жыл бұрын

REVIEW PRINTERS MY GUY TO KEEP THIS CHANNEL ALIVE. NOBODY INTERESTED IN CUBAN OR MEXICAN GOLD CHAINS LOL PRINTERS PRINTERS PRINTERS IS WHERE ITS AT SO CUT THE BS

@vogman Жыл бұрын

BS? I'm not sure I'd agree. This Channel is me... it's my interests... the things I like to do. I'm not sponsored by anyone which gives me the freedom to be and to do what I want. I was metal casting before I was printing. For me the two interests overlap and I know the same goes for many of my viewers. It might not suit everyone, but they don't have to watch.

@AtkinandSon Жыл бұрын

2.8k viewers probably disagree with you JR.

@jaimierogers4388 Жыл бұрын

I'm one of the 108K subscribers who disagree with your suggestion. If I only want to watch 3D printing reviews I have a number of options. But how does that help me with casting? And are those channels looking at printers from a casting perspective? When I'm looking for casting info those channels won't help me. I'm glad VOG is here to give his perspective and tips.

@CroFittings Жыл бұрын

I started watching to learn about how resin printers can be used in the casting world so all the videos whether they are printer reviews with casting elements in them or specifically about casting with the use of a certain printer are useful to me. I don’t care what the casting may be, it’s the process I’m interested in watching. So I think it’s all valid, don’t like it? Don’t watch.