CV Axle | 2nd Gen Toyota 4Runner

Рет қаралды 10,670

Жыл бұрын

In this video, my wife and I replace both CV Axles on our 1990 Toyota 4Runner. This process should be similar for all 4Runners and Toyota pickups of this generation and model. Hope this helps!
SUBSCRIBE: / @roughcutsgarage
Share this Video: • CV Axle | 2nd Gen Toyo...
Follow us on Instagram: @roughcutsgarage
Check out our Shop: www.etsy.com/ca/shop/roughcut...
Parts:
AMAZON US
Cardone CV Axles 66-5009: amzn.to/43tifmc
Arcan 3 Tonne Car Jack: amzn.to/43y0otQ
Pro-Lift Jack Stands: amzn.to/3WNy0BA
Moly Grease: amzn.to/3WSKGrc
___________________________________________________________________
AMAZON CANADA
Cardone CV Axles 66-5009: amzn.to/3MZUhZL
Arcan 3 Tonne Car Jack: amzn.to/3MJtfEy
Pro-Lift Jack Stands: amzn.to/3MJtfEy
X-Tra Heavy Duty Grease: amzn.to/3q9k0G8
Camera: GoPro Hero 10
Editing Software: DaVinci Resolve 18
Animation/ Thumbnail: Canva.com
Music: Disfigure - Blank (NCS Release)

Пікірлер: 29

@kos_187 9 ай бұрын

Should put some manual locking hubs on there to increase the life of those CVs even longer!

@putradjaja8196 6 күн бұрын

Pretty sure yes

@fightthelies4349 5 күн бұрын

Great video, if you undo the LBJ the whole assembly slides right out. Just dont damage the boot on that trying to loosen it.

@roughcutsgarage 4 күн бұрын

Awesome thanks!

@morganmcadams6596 10 ай бұрын

Hey man, your channel has been immensely helpful

@roughcutsgarage 10 ай бұрын

Hey thank you! Glad to hear!

@OvensGarage Жыл бұрын

Bet you are glad to get that one done!

@roughcutsgarage Жыл бұрын

Yeah lol, only took 2 full days to figure out haha

@samuelcoleman9629 11 ай бұрын

This is a really well done instructional video, thanks. What I really want to know though is where u got that roof basket decal. Would look so good on my white 2nd gen :)

@roughcutsgarage 11 ай бұрын

Thanks! My wife actually makes them on Etsy. Check out this video and the links for the decal are in the description. kzfaq.info/get/bejne/i62mdcRqur68oY0.html

@edwinharris3699 8 ай бұрын

Symptoms of bad CV joints are noted by many as “clicks”. I would say the sound I’m hearing on my 92 run into the ground, rescued 4 runner is more like big “clunks”. How can one diagnose with certainty, prior to taking things apart? Great videos. Thank you!

@roughcutsgarage 8 ай бұрын

The only thing we had wrong with ours was multiple trips through sand, mud, and water with open CV boots so we figured we should replace them. We didn't experience any clicks or clunks. My recommendation would be to jack up that side, hand rotate the wheel and feel for grinding or clicks, then you could also go under and try to wiggle the axle itself. There shouldn't be any really notable slop. A little is fine but you could try and replicate it that way. That's what I would try but if anyone else reading wants to chime in, please do.

@akewt Жыл бұрын

Well done! Hope I don't have to change mine! 🙈

@roughcutsgarage Жыл бұрын

Thanks! The key part for us was figuring out how to get the axle out without taking apart everything.

@philbialek7236 11 ай бұрын

How did you get the serration bolts on the passenger side seated after removing them? There is so little room, with the diff in the way, to actually hammer them in!

@roughcutsgarage 11 ай бұрын

I think I used a punch if I remember correctly. Or I hammered them with the side of my hammer. You just need to get them in enough for the teeth to grip then they will work themselves in from tightening the bolt.

@TacoFijiwater 8 ай бұрын

thank you for all the help, where abouts did you get your overfender's or were they already on the vehicle, and if you could steer me in the direction for some locally, i haven't been able to source some :/ thank you!

@roughcutsgarage 8 ай бұрын

Hey out pleasure! The brand is Bushwhacker. Couldn't find their website but you could try amazon or a 4wheeling parts store.

@irangeu36 9 ай бұрын

In the middle of doing this and i seem to have messed up my studs on my hub tapping out the conical washers. only able to get 2/8 of the nuts back on the hub. i tired chasing the threads but no luck. any ideas or am i getting a new hub?

@roughcutsgarage 9 ай бұрын

Hey! Those studs are threaded on both sides. You can back them out. Recommend pulling one out and taking it to a hardware store and finding replacements.

@JammyCrackcorn Жыл бұрын

I wish mine had been that easy..I had to use a 3 foot cheater bar to loosen all 6 on ine

@roughcutsgarage Жыл бұрын

Thats crazy! They definitely weren't easy.

@michaelgurule4589 8 күн бұрын

Where did you get those headlights

@roughcutsgarage 8 күн бұрын

Hey picked them up off of Amazon. kzfaq.info/get/bejne/fLGifbKcxq3Tpps.html Parts should be in the description. 👍

@Ramjam9000 Жыл бұрын

Toyota sure as hell don't want anyone to do repairs or modifications themselves.

@roughcutsgarage Жыл бұрын

Haha for some things they are awesome but others it's just a huge pain.

@fightthelies4349 5 күн бұрын

This is one of the easiest trucks I work on. If you undo the lower ball joint and the sway bar it slides right out because you can move the knuckle around freely. Little more work for less work in the end.