Applying K Rend base coat to the garden office

No video

Applying K Rend base coat to the garden office

Рет қаралды 52,408

Build and repair and restore

Күн бұрын

Today’s task is to start applying the KRend basecoat to the external walls. We used the HP12 basecoat.

Пікірлер: 98

@ralphthebrick 3 жыл бұрын

Good days work boys. Nice to see it done right, very professional

@deborahcauson5199 3 жыл бұрын

It's so therapeutic watching you do this....now I understand about k rend lol

@Joshuadg95 3 жыл бұрын

Great work!!! That's one giant afro comb!

@jimmybaldwin737 3 жыл бұрын

Lovely video. Your work looks really neat and clean. I’ve worked with plasterers. And there scratch and everything is just rough. Nice job. The scratch looks the neatest I’ve seen 👍🏼

@darrenthebuilder 3 жыл бұрын

Thanks Jimmy 👍🏾

@macky0305 3 жыл бұрын

Wha!, Dread a render!, Nice work me bredrin. 👏🏾👏🏾👏🏾

@darrenthebuilder 3 жыл бұрын

Thanks 👊🏾

@62retrac 3 жыл бұрын

Looks like a lovely job! Good video too! Well done guys 👍

@harrybond9282 2 жыл бұрын

VERY NICLEY PROFESTIONAL WAY YOU DID.

@sanjay2116 3 жыл бұрын

Excellent job guys, good to see you take pride in your work. 👍

@darrenthebuilder 3 жыл бұрын

Thanks 😊

@mohammedafzal5359 3 жыл бұрын

Great job lads, can see u take pride in ur work, keep it up :)

@darrenthebuilder 3 жыл бұрын

Thanks

@RichyParton 3 жыл бұрын

Great video lads. Good tip on the overlap of mesh and nice finish. Thanks for making the video

@themudhutt1 3 жыл бұрын

I could watch that all day ..... skills 💪

@liviurabet7326 Жыл бұрын

Well done and keep up the good work 🥂🥂🥂

@usernamey 2 жыл бұрын

One of the best videos on rendering I’ve seen. if you guys could go into more detaile on sizes etc, you could be the best. Great camera algles and quality! New sub100%

@darrenthebuilder 2 жыл бұрын

Thanks, we have some Krend to do on the current project s ill try and do a bit more detail

@stuartandrews4344 3 жыл бұрын

Superb job, love attention to details.

@RobinHood-uv6uw 2 жыл бұрын

What a brilliant job you guys, well done. 👍👍👍👍

@petersparshot4997 3 жыл бұрын

Nice tidy job lads

@kasper52173 3 жыл бұрын

Baaad Mans are not messing around!!! 👍🏾

@boxerdogsam Жыл бұрын

Great job lads,👌

@damprotek 3 жыл бұрын

Nice job I'm gonna put mine on with two top coats as I've seen people scratch it back and the base coat is coming through but if you've got the same colour on the bottom coat it won't notice also it sticks like s*** anyway if not I just put SBR over everything and then put the first coat on and mesh it then scratch it each to their own many thanks

@darrenthebuilder 3 жыл бұрын

Thanks, yes you gotta have it on the right thickness. Sounds good 😊 hope it goes well

@lukekitcher1175 3 жыл бұрын

I always put a tight 2 or 3mm just so it takes to the scratch coat then a thick 10 or 12mm second coat. Krend can go tits up quick if you don't know what your doing.

@petergray882 3 күн бұрын

Does the mesh coat need to be scratched ,seen lots unscratched ¿

@darrenthebuilder 3 күн бұрын

@petergray882 yes you should scratch it

@viankalobosvalenzuela7456 3 жыл бұрын

Excellent work great professionals greetings from San Felipe chile

@darrenthebuilder 3 жыл бұрын

Hello Thankyou and welcome 😊

@gavinwilliams2240 3 жыл бұрын

You can just go straight onto them block with out the base coat you know saves cost an time just use 15mm beads an do 2 passes of top coat with mesh in first layer get all on in a day rub it back next day

@johnwinters6999 Жыл бұрын

Good job lads

@junior4246 10 ай бұрын

great work guys, you both work great together, can you tell me what size beads did you use ? and have you got a video of the top coat going on ?

@markdavies389 2 жыл бұрын

Top job boys.

@nom843 3 жыл бұрын

top work lads

@TheBiglfb 2 жыл бұрын

@09.20 i see you found a great use for Mr A's Afro comb lol.....

@dccowell56 3 жыл бұрын

nice tide job, just one small thing, l would have to clean all the crap away from the building first would make it a lot easier, o, and put radio on you gays talk to much, hehe good work.

@kktomm 3 жыл бұрын

Beautiful job chaps, but why not move all that shite out from under your feet on the back elevation? Was sure of you was gonna snap an ankle 😆

@darrenthebuilder 3 жыл бұрын

Lol it should of been moved since Monday but one of our workers has been off for two days. It should be moved today

@feidhlimidhmacanaltha3644 3 жыл бұрын

Fact no way i could work on with that mess

@Ireland-bc2gx 3 жыл бұрын

You guys could really use a magnetic lathing hammer and stud nails for that bead no messing around with that mud,its how we roll here in fla,great channel 👍

@wandaroach765 3 жыл бұрын

So very nice 👍

@darrenthebuilder 3 жыл бұрын

Thanks

@mrv5801 3 жыл бұрын

TIDY JOB!!!!! 👍🏽👍🏽👍🏽

@chrismcgee3745 Жыл бұрын

Hi, brilliant page! How long does the HP12 last once mixed in the tub?

@lukethedukewatkins7441 Жыл бұрын

What primer did you use for the walls before putting on your beads? great video

@jamesjb2007 3 жыл бұрын

Nice one may I ask why did you apply base coat before mono thought mono could be put on straight on block 2 coat meshed??

@darrenthebuilder 3 жыл бұрын

Hi James, I have seen people use without and I think It’s ok, but I prefer to be safe than sorry. You can’t go wrong using the hp12 basecoat to be sure of no adhesion issues.

@jamesjb2007 3 жыл бұрын

@@darrenthebuilder yes makes sense

@philstation335 3 жыл бұрын

Good job guys how thick did u put ur base coat on?.....haha ur jacket seen better days looks like a seat at the back now lol...how many bags you use for basecoat

@darrenthebuilder 3 жыл бұрын

Hi Phi, I promise to pick up a new one soon 😅 The basecoat is say anywhere between 5-10mm

@razorkane5011 3 жыл бұрын

I was so bummed no music😥

@kasper52173 3 жыл бұрын

👍🏾

@RicardoTheCraneOperator 3 жыл бұрын

Nice :)

@zdzislawchujaki6169 3 жыл бұрын

Hi lads great job .could u tell my what’s size beads u using for that job ? Thanks Karl.and what kind of base coat this is

@paulperrin2152 3 жыл бұрын

Does the mesh stop it cracking ??, another great video

@darrenthebuilder 3 жыл бұрын

Yes to stop cracking.

@rockroll456 3 жыл бұрын

Nice job guys how long do you get with the base coat be fore it start going off 👍

@darrenthebuilder 3 жыл бұрын

Hi, you get a decent time. Much more time than sand and cement. I would say you have an hour to play with it.

@bhurst5055 3 жыл бұрын

Hi I’m after a bit of advise please, I’m an experienced renderer but never used K rend before. I applied the HP12 base coat over a month ago now too a friends garage and going next week too finish up, my question is will I need too SBR the base coat with it being so dry or at the least soak with water or can I just go straight on top? Thanks.

@darrenthebuilder 3 жыл бұрын

Hi I know you need to give 24hrs between the coats but I doubt theirs a maximum time. I don’t even think you need to wet it as the base coat is very waterproof so doubt it will absorb much anyway. Is just go straight on.

@suddy07 3 жыл бұрын

Hi sorry to bother you, on brickwork could you tell me how many square meters do you get from a bag base coat and also top coat on brick, I’m a plasterer but never rendered and wouldn’t mind doing my bungalow. Cheers Steve

@darrenthebuilder 3 жыл бұрын

Hi Steve, you should get about 1.5 - 2 square metres out of a bag. That’s both basecoat and top coat.

@wandaroach765 3 жыл бұрын

Why do these home owners want a complete separation house on such a small plot?

@darrenthebuilder 3 жыл бұрын

They maybe what a separate office space away from the house

@fireykev 3 жыл бұрын

Nice job , how many meters does a bag of hp12 roughly do,. Thanks

@darrenthebuilder 3 жыл бұрын

Thanks. You should get 2.5 - 3 sqmetres per bag at around 4-6mm thickness

@fireykev 3 жыл бұрын

@@darrenthebuilder many thanks m8, been plastering for years , but never used krend

@gvine7691 3 жыл бұрын

Great job how many bags that take

@darrenthebuilder 3 жыл бұрын

I can’t remember lol

@tomg3245 3 жыл бұрын

From putting the first coat on till scratching the lines in roughly how much time do you get 🤔?

@darrenthebuilder 3 жыл бұрын

I’d say do it as you go

@iancampbell839 3 жыл бұрын

How long can you leave the base coat before you add the top coat? Top workers.

@darrenthebuilder 3 жыл бұрын

Thanks Ian, give it till atleast next day

@iancampbell839 3 жыл бұрын

@@darrenthebuilder Can you leave it longer? Does the base coat have a time limit before it's knackered?

@darrenthebuilder 3 жыл бұрын

Yes you can leave it longer. The basecoat is waterproof so I guess you can leave it quite long

@iancampbell839 3 жыл бұрын

@@darrenthebuilder Great thanks for the help. Do you cover North Wales?

@vytaspuzinauskas8329 3 жыл бұрын

How long do you have to wait to dry out base coat before you apply top coat

@darrenthebuilder 3 жыл бұрын

You can apply it the next day

@RobinHood-uv6uw 2 жыл бұрын

How long does the base coat take to set, or does it go off overnight?

@stepbackandthink 3 жыл бұрын

How many bags of HP12 did you use for this job?

@darrenthebuilder 3 жыл бұрын

Hi I think around 10 or so but I’m not sure

@expedition-UK 2 жыл бұрын

Hi, what size stop beads and corner beads you using? 10mm? Thanks

@deadpresident78 3 жыл бұрын

Can the K-rend be applied on the inside walls?

@darrenthebuilder 3 жыл бұрын

Yes you can

@richard01206 3 жыл бұрын

Do you put any sealer of the blocks before base coat?

@darrenthebuilder 3 жыл бұрын

No sealer required. You can apply this direct to the blocks. If it’s an existing rendered painted surface I would use a primer first. This product has very good adhesion.

@richard01206 3 жыл бұрын

Cheers for the reply

@darrenthebuilder 3 жыл бұрын

You’re welcome

@goldenineke 3 жыл бұрын

What is the purpose of the mesh Darren?

@darrenthebuilder 3 жыл бұрын

Hi Ineke, the mesh is to prevent cracking.

@postman445 2 жыл бұрын

Do you fit insulation

@bhaveshsolanki6485 2 жыл бұрын

Can you render over existing older render like this? So you will still have to do a base coat and a top coat,or could I get away with skimming over the existing render?

@darrenthebuilder 2 жыл бұрын

Yes you would need to use the base coat first

@bhaveshsolanki6485 2 жыл бұрын

@@darrenthebuilder thank you and great work, I wish I had your skills, but its never too late to learn 😉