Hi Kyle. Great job. I just got my frame and I wanted to make sure I was setting it up properly. I ordered my frame on March 1 and it was delivered today March 18. I had great communication from DHL and Omanik all along the way. This has been a great experience and thanks so much for your video.

Great review and demonstration, Kyle. I love my Omanik frames and don't use anything else, especially because I can get great tension on my fabric. I learned a couple of things from watching you get things set up. I just have one suggestion. A few months ago someone posted a picture on Instagram of one of her screws snapped in two from normal use. That made me a little nervous about how I was using my frame. Since then I always make sure that the holes on the horizontal bars line up (both either up or down, never one up and one down) and I try to minimize the distance that I have to extend the screws. My theory is that if the holes don't line up and the screws are extended too far the tension will introduce a torque that will cause the screws to fail eventually. I also loosen tension when I am finished stitching so that the screws don't remain under tension for an extended period of time. It often takes me two or three tries to get the distance between the bars right. If I don't like what I have I will unroll one side and pull the fabric a little to reposition the bar. Once again, thanks for the demonstration!

Kyle, thanks for this video, this is one of the best tutorials I've seen about this frames!! Cannot wait to get mine!!! 👍🤩

Thank you for sharing, I must buy one as soon as they are back in stock.

You are awsome and a mind reader. I like drum tight fabric and have been eyeing this frame since Xmas. I’m definitely getting one now. Thanks Kyle!

Kyle, you did a great job explaining this! I think you would be a great investigative reporter- no detail escapes you. You’ll really be cranking out those Mirabilias now!

Great demo Kyle you did a very detailed and understandable video. You are very nice guy and I'm impressed with your love for the craft. Thanks so much for sharing and I will be checking this frame out.

Kyle! This was fantastic! Thanks so much for sharing - you’re making me want to get one.!

Just yesterday I wish listed all that I’m going to soon purchase from the Ominik Factory and this morning up popped your video on that very company! Thank you so much for that great review Kyle!

Great video Kyle. I've been very curious about these frames. I decided to give them a try. I especially would like to use them for beading. Can't wait for my frames to come in!!! Thanks for the great review

That was fabulous, brilliant demonstration and review. Really helpful

Brilliant video, thank you so much for taking the time to do this :)

Thank you for the explanation, very easy to follow!!

Great explanation and demo Kyle. Thank you.

Really quite easy to follow your explanation. I think you did a good job on your review/demo. If I used frames, I would probably feel more comfortable getting one of these after watching this.

This is an excellent video. Thank you so much. I plan to order one soon.

Thank you for the comprehensive demonstration! I have a couple of Omanik frames, and I learned a bunch from watching your video!

Thanks for the video. I am waiting for my quantum frame to be delivered, can not wait!!!!

Great review!!! I am going to get one and see how I like it. It looks really easy to set up. And it doesn’t sound too expensive. ❤️💚

Thank you. I had no idea how they worked. You did a great job.

Great tutorial! Your videos are always fantastic and I just think you're such a nice person, so kind to share what you know and what you learn with the Flosstube community! I have to give you all the credit (or should I say blame, lol) for my current Mirabilia obsession... I'm obsessed with getting all the patterns and stitching them! I'm so jealous of your collection, you are such an enabler!! (Thank you ;)

Great explanation, Kyle! You’re a pro! And that shirt is glorious! 🖤

I’m glad you did this video! When I got my Quantum there were only videos in Russian that explained it, haha, which made things a little difficult for me. You did a great job with the explanation!

Excellent review Kyle! Now everyone wants one. 😉

Great review.. i think i will be getting one afterstitching with a hoop for 35 years.. thanks!

Great demo, thank you. You just make me smile. Your an amazing young man and I really enjoy your videos. I am going to look into this frame. Karen

Thank you for doing this video! It was really easy to understand and follow your instructions. 👍🥰 Meline

Thanks Kyle. VERY helpful and informative! Sally in Northern California. 😁

Wow you're lucky, I ordered mine on 22 January and still waiting to receive it here in the UK. I have a Millennium frame (and floor stand which is awesome) which has wooden screw side stretchers and they don't squeak. I'm looking forward to comparing the two when the Quantum turns up. Kay x

I roll my scroll bars the same way as you for the same reason. Plus it keeps the fabric cleaner on the right side that will show any grime when done. :-)

Very nicely done!! Thank you for the tutorial!! :-)

I have had mine for years and i really like it. You forgot to mention the best part of the package.....the chocolate!! Nice guitar by the way. I have been known to add fabric to the top and bottom of my fabric to make sure I have plenty of overhang

Kyle, this is great! All I see is prices quoted in Euros on the website. I may be upgrading my old frame, LOL!

Thank you so much for this excellent video! You have me a better way to use my beautiful Omanik frames!

A wise man, not risking it for the biscuit.

Great video.

I have a large frame with the side stretchers and I am puzzled as to how to use the side stretchers, would love to have a tutorial on how to use those.

Thanks for the review and tutorial. I have thought about getting this frame but haven't yet. I love mt fabrice drum tight too. I also thought it was more expensive. I got my Lowery stand last year and love it. I would be great with this frame. You should think about getting one Kyle. I can honestly say it is the best stitching purchase i have ever made. I love it. Happy stitching

This has been a great video. I have been noticing several videotubers useing them and have been contemplating buying one. Why did you select that width? Were there other width choices?

Thank you

Siento no entender video. Pero se que sus productos son los mejores.las KZfaq españolas lo recomiendan como tales.felicidades.los he visto y muy bien explicados.alaban su servicio y su trato esmerado

Great video kyle. I would love to order one but confused on the prices and demensions on website. What size did you order, and how did you know which one to order. I am looking for a 20" frame.

Great explanation and tutorial. I want to order some frames. I’m not sure what size to get. I’m thinking of using it for Mirabilia and HAEDs. What do you think of the size you have?

Thanks for the great review Kyle, I’m looking at getting one of these frames for stitching my HAED- but I do have a question- when choosing what size to order- is the size for the side stretchers (15cm in your case) the minimum or the maximum? As in do yours extend out further than 15cm? Or is that the maximum they will extend out to? I hope I’ve explained that ok. Thanks x

Kyle, I really enjoyed watching this, and I have totally decided to get myself one. I have one question, you said you ordered the 80x15 unit. Does the 80 measurement refer to usable length of the scroll bars? In other words, on the ends there are the square parts where the nuts fit in. Is the entire scroll bar 80 cm, or is the 80 cm referring to the round part in between the square parts. I hope my question makes sense. Thank you for making videos. I really enjoy how real you are.

LOL! I"m surprised you know who Neil Peart is. You're so young, maybe your mom likes Rush and that's how you know. Excellent review, Kyle. You covered all the bases. Gonna buy when I get paid.

Kyle there is a good sale going on for these frames right now. In case you want to share with your audience. It’s a pretty good sale. Looks to be about 20%

I find the pins are really loose after inserting the pins so that the material, even though I have made sure it is lined up, will move and be crooked. How can I keep the pins from allowing the material to move so freely (I am using 32 ct evenweave)

Really good tips Kyle! Did you say I’m not riskin it for the biscuit? Lol

Hey Kyle I got mine this week an sadly my rods are way to big an I'm so upset bc I don't do full coverage peices I ordered the. 50cm an got. The 90cm any suggestions on maybe finding someone with smaller 1s maybe a trade

When u order it and how long did u wait for it to deliver to you? Just checking

I was like "no thank you that fabric is way too loose for me" then you twisted the bars and my jaw dropped.

It's clearly a knock off of the Millennium Frame. The Millennium Frame is the original version of this type of frame, and is all wood (beech) and hand made. No plastic parts at all.