Delco Radio AUX Two channel input upgrade just for fun
Пікірлер: 92
@haku-jin9 жыл бұрын
Thank you Tim, my Delco cassette radio built in March 2003 doesn't have the 14 pin CD connector that everyone else uses to add an Aux input. Using your video I was able to cut into the FM circuit exactly as shown and can now enjoy listening to podcasts directly from my iPod without having to "play" a blank tape or CD. You are a gentleman and a scholar.
@27479BB14 жыл бұрын
Thanks a lot, i did it to my radio and it’s working beautifully. I made a video using your method in my channel with better resolution so people can see the solder points better
@MrSeth1669 жыл бұрын
It works I just did mine and it sounds good but it comes out Mono not Stereo also my FM sounds with lower Bass and low volume. Great video Tim.
@pauljs759 жыл бұрын
I think for the Monsoon style AC/Delco head, there's some adapter called GM10AUX or some sort that plugs in the back. I'm considering this on my Grand Am. (Shame they tease us with the button, but don't provide this feature by default.) And I wouldn't hack up anything on front either, I'd run the wires down so the lead would come from the back of the storage cubby in the middle. Good spot to put the MP3 player and the connection is out of sight and out of the way when not in use.
@m-c-m-8 жыл бұрын
I would suggest doing it this way and avoiding mono sound, also would be easier for a notice to complete. There is a thread on LS1tech called How you can add aux input mp3 player without adapter that shows close ups and is cut and dry.
@michaelw81097 жыл бұрын
Thanks! This worked great! However, it might be mentioned when using a five prong 3.5 mm jack it will be necessary to jumper between the two normally closed contacts. Otherwise, awesome!
@sick_mopars_7118 жыл бұрын
Can you do a video for installing aux on 2003 Tahoe with 6 disc Bose with onstar?
@janbill79 Жыл бұрын
Nice video lesson on aux. I counted the bottom connection spot from left to right 15 solder globs then 2 globs then the 1 single one is it. the top wire hooks to furthest left blob , of cross ways row of 7 I have a radio like this from a 1999 venture van. I got it home, from salvage yard ) think I paid $10) Tried it on my test bench. Lite up display for just a second and fuse blew between radio and my 12 volt power supply . Do you suggest looking for a bad capacitor in the power supply. My other radio similar hooks up at the bench & worked fine. So its not the bench wiring.
@TeamHURSTOLDSRich4 жыл бұрын
I would like to see a video on how to add an input to the Monsoon radio found in many GM vehicles. Specifically the ones with the AUX button found in the Pontiac Grand Am.
@compaweasel19 жыл бұрын
I have an Delco radio model 16161605 off an 1993 Chevy S10 it has no CD player no Tape player only radio. Can you show me how to add an AUX and USB port it will be helpful been looking for a long time and your videos are the easiest to follow. Thank You
@y_dnahomz9903 жыл бұрын
I have a problem.. my CD player on the stock radio doesn’t engage and won’t let the signal from the Bluetooth modulator interrupt CD player music.. is the a bypass to trick the cd player to stay on??
@jloera20048 жыл бұрын
didn't like the results. now my fm and am doesn't work and when the aux works thru my speakers it's after I switch to am for a second then switch to fm. I have done some older gm radios with aux and I have done them with 2k resistors and wired different and worked like a charm. what did I do wrong?
@El_SaTa2 жыл бұрын
Hi. I bought a modded delco radio for my 2004 Astro, but despite it works, the sound is mono and lacks good tone. Seems not to go thru the preamp. I can adjust bass/treble, but the sound is not good. What do you think?
@michaelpichardo10 жыл бұрын
Can this be done on a 2006 model (Chevy Tahoe) , what would be the differences in the board. This video was very well made.
@boomernyob49309 жыл бұрын
Tim, I want to mount the jack remotely. If I use two separate wires inside like you did and bring them to a panel mount RJ 11 at the back of the radio, then use a regular phone cable with the RJ 11 male on one end, cut the other end off to wire to the 3.5 jack, will I experience cross talk? Doing it this way gives me a nice clean small connection in case I have to pull the radio out for some reason. Also, it appears you are saying that it does indeed give you stereo audio quality and not mono correct? Thanks
@clintonfawley93238 жыл бұрын
do you have a picture of the board before you soldered the wires on. and if so can you circle where you solder the wires and everything else that you did? please and thank you
@mikebanducci13966 жыл бұрын
I agree. I need more visual clarity. Did you ever find out?
@FaisalRamzan8 жыл бұрын
How i can add USB kit with Coure Car FM Player . Please elaborate with with step and soldering wire with highlight the points. Thank you , your videos are informative
@jebradleymd7 жыл бұрын
Which channel do you wire? Since it's only a 2-wire modification (actually 3, because you're also running a ground wire), you must be loosing the stereo.
@richardcote96633 жыл бұрын
Nice video. Been watching a few videos about adding auxiliary inputs to car head units. Very interesting indeed. You wouldn't happen to know how to locate the preamp output signals in a FM modulator? I have a Kenwood 10 disc cd changer that I would like to add to a newer vehicle's factory head unit which is equipped with an auxiliary input. Problem is I do not want to utilize the FM modulated signal as the sound quality is terrible. I have the service manuals for both the cd changer and FM modulator, but I cannot figure out how to bypass the fm modulator. I would like to add 2 RCA connectors to the modulator, actually bypassing the fm modulation of the signal and have a nice clean full bandwidth signal to feed to my auxiliary input. Is this possible?
@NeilCaulfield6 жыл бұрын
So does this overpower the FM signal when connected? I am trying to figure out how it automatically switches when plugged in
@wandalllither24525 жыл бұрын
5 pin 3.5 jack, 4 of the connections acts as interrupted ONLY when u insert 3.5 jack, hence the signal from your AUX jack goes where it needed (before interruption it was coming from an fm radio module) research 5 pin 3.5 jack, 3 pin 3.5 jack wouldnt work
@jweb479 жыл бұрын
Any comments on how to ad a aux input to a GM 15216905 radio that's in my 05 GMC Canyon? It doesn't have XM so the plug is empty on the chassis. Thanks, Joe
@electronicsbyjohn7 жыл бұрын
Can you do this with a delco cdr 500?
@waylander27 жыл бұрын
I have a 97 Sierra with a radio that has an AUX button on the front ( it doesn't do anything) and has a separate stand alone DC player. Can I use this same procedure? Thanks
@Thenebrosity11 жыл бұрын
Hi, I think I've found the correct solder joints, I was wondering which ones represent the right and left side.. There any way you can please upload a clear picture of where the correct solder joints are? Thanks
@husseinalnasrawi37666 жыл бұрын
There is three wire right and left and negative of aux where? i put these three wire on the board
@w8fg7 жыл бұрын
I have a 96 Buick LeSabre Custom , it has a bad cassette deck , I would like to see proper hack to just remove the cassette portion, make a plate over the front opening, mount a toggle to switch between aux and the AM/FM , this seems reasonable I just dont know proper starting point for this, stealing cassette wiring to accomplish this? I have plenty of tools, even a decent scope, plenty of parts, but zero money right now. Your advice is welcomed. 73 de Seth - W8FG
@jameybarisoff4 жыл бұрын
How to do this on a 1995 Lincoln Continental jbl head unit with cassette and has a cd changer?
@petecharest9 жыл бұрын
Hello Tim..this video looks like exactly the thing I need to do for my radio which is the same as yours here. I am going to mount the 3.5 jack externally on a different part of the dash. But I can't quite figure out the parts that are blocked by your finger or not shown clearly on the video. Can you help me? Thanks in advance!
@NSAZ069 жыл бұрын
I have 2003 Chevy Tahoe Z71 how can you do the Aux input... Please let me know
@jimgordon32068 жыл бұрын
Great video. I don't want to destroy my radio. Do you do this for customers? Can I send my radio to you? How much would you charge?
@roydervish-me2ns7 ай бұрын
Здравствуйте, обозначение проводов для разъемов delco 15071234 не сохранились ли у Вас? С уважением.
@ericmcdonough3078 жыл бұрын
Hey Tim. I was thinking if you new how to install aux jack to a 06 sonata factory radio, with am/fm/cd palyer only no xm. can u interferer with the fm like you did in this video for the delco radio. thanks.
@vincentfiliberti79039 жыл бұрын
Can you show how to do it on a 2007 Chevrolet Silverado stock stereo with out the cassette player
@mohamedtorky11448 жыл бұрын
hi tim great video but i am intersting if you could found way like the first video as stereo better
@BT_Spanky11 жыл бұрын
It'll be used in my 1986 Oldsmobile Cutlass supreme. I don't want the port on the faceplate..., if possible, could you do a tutorial on how to modify one of those type radios?
@Marc_Wolfe9 жыл бұрын
I have a Chevy lumina with an almost identical radio ...almost. I'm trying to find the pinout for the fm reciever. The radio's model number is 16232091 and the serial number is89bszfm310480304. The am/fm reciever has a bar code with the number 8086 us vert 7121 raa1w. @tim does your radio have the same reciever, if so I would like to know which pins are the left and right channel. Thanks.
@rolferiksson1856 жыл бұрын
Hello i have a Sony cdx-mp40 and want to do this job tanks Rolf Eriksson
@giuseppeagostinelli96428 жыл бұрын
I've watched both your vids on this. i have the exact same looking cd player from my 2000 Silverad/Sierra. it has the fan on the rear with bump under the antenna jack. but my board does not look like the one in this vid. So i cant tye into the same location. How do i find out schematics? model # 09375915 Delco
@timramich9 жыл бұрын
Why not just interrupt the signal that goes directly to the amplifier, so it doesn't matter if you have a CD in there or it's on the radio mode?
@jaredj6318 жыл бұрын
My CD player just says err all the time.
@boomernyob49309 жыл бұрын
Has anybody done this and ended up with the FM section being WAY quieter than the AM when finished? I'm pretty sure I have the right connections because the aux jack works fine. I also ran a continuity test between the two points he used before I cut the trace and it had continuity. What's also weird is I can only hear the ipod when on FM. If I have chosen AM, I hear AM radio. This is regardless of whether the ipod is plugged in or not. This is driving me nuts
@boomernyob49309 жыл бұрын
Figured it out. One of my connections had come loose on the board. Couldn't see it til I pulled the CD player back out and took a look.
@darylbartlett8177 жыл бұрын
Can you do a close up of the connections an the ground on the 3.5 I don't want to screw it up when I do this
@behnkeb218 жыл бұрын
could you do it on the radio out of a 2005 Pontiac grand prix without xm or premium sound?
@autumnjeserich26892 жыл бұрын
What kind of jack did you use?
@Danielab99 жыл бұрын
Can i do the same procedure in a Delco Bose 16179646?
@nxime736 жыл бұрын
Hi I was wondering if you could do a 2004 to 2007 Pontiac Grand Prix audio input jack
@michaelwolf56098 жыл бұрын
any chance you could make a video with the delco model 15075614
@Jaruddd11 жыл бұрын
I've got this unit in my '99 Lumina, though the PCB is laid out differently from yours. Is there a way I can determine where my FM points are located? I've tried looking for a schematic for my model number and have come up empty.
@Thenebrosity11 жыл бұрын
Alright, after setting everything up as instructed everything worked overall, however.. once running a test for the right and left audio channels I only have the Right Channel coming through on both speakers but no left channel.. is this how it suppose to work? Also, during the 1-2 seconds of silence between tracks the FM Radio station blasts through the speakers then it goes back to the music on your MP3/Phone/Music Player.. is this how its suppose to work? I'll Post a video of what I mean l8r
@joseangeldominguez36638 жыл бұрын
can you do a vid to show how to do this for a 2004 buick Rainer, (NO xm) regular 6cd changer/player
@7PinesPulling10 жыл бұрын
does this play through all the speakers or just one side of the vehicle? thanks for any help
@Blakep77045 жыл бұрын
Can you mod the older Delco radio from my 90 square body k5 blazer? I want either a usb or mic.
@md650008 жыл бұрын
Now can you make a video about getting rid of all the g*ddamn ignition hum?
@TheFariswheel9 жыл бұрын
I would like to see how its done on a Nissan altima 02-05 radio model py020. Is there a way I can share pictures with you of my unit if you can't get your hands on that radio model ?
@TheFariswheel9 жыл бұрын
Sorry its model # PY010
@stefanosanestis29567 жыл бұрын
could you make tutorial for renault clio 2002 radio?i cannot find the pins for aux please help
@nicknarz19 жыл бұрын
im looking to do this to my 2006 stereo manufactured in 2005. Delco delphi no. 21002195. i know its possible can you make a video for that model please. ive looked everywhere and would like to try this myself. Thanks in advanced
@migujara95107 жыл бұрын
Tim how much would you charge to put that on my 2004 pontiac azteck stock radio?
@dirkdejong84217 жыл бұрын
Tim, I left a message on your website contact form regarding positively identifying the terminals and traces. If you have a chance, please reply.
@boydalcorn53937 жыл бұрын
can you do this same radio but with a bluetooth?
@u8un7u5 жыл бұрын
thanks for video. I'm looking for internal diagram of 94/95 Delco 16179102 / 16166661
@hasanal-thigah848410 жыл бұрын
Thanks a lot man for this amazing video, but can you help me out by doing the 2003 Chevy radio single cd , cuz I don't have xm radio to take it from it. Thanks again man
@tmuckey10 жыл бұрын
I agree you can get an aux interface however; your unit must also be configured for the aux interface. You are correct that there are other ways of doing this. This application does give you 2 channels and sounds good at least for my old ears. For some just getting a more modern replacement radio with all the new technology provides overall greater value. This was just for fun and to show those who would like to play with electronics the infinite possibilities. Thank you for your valued feedback.
@eduardoromodevivar688010 жыл бұрын
hi Tim, great video, I have a 1998 Chevy Silverado and i want to keep the factory radio. This radio is very similar to the one you showed, but instead of a cd player, it has a cassete player, the board is different but I think it can be done in the same way the radio model is 16265855
@eduardoromodevivar688010 жыл бұрын
could you help me please? thanks
@Austinsairplanes11 жыл бұрын
will this work on a standard 2000 grand am radio and are they the same
@oemautosound10 жыл бұрын
Sorry but this is not the correct way of doing this, you are cutting audio from the FM decoder and the input its only one channel, Mono audio. everybody wants stereo, that is the reason you are only using 2 cables, I'm sure there is a better way to do this if you connect after the preamp for now there is a 9 pin plug on the back side of the radio and that works with the aux button no need to open the radio just purchase the correct cable with the interface and you can do this in 5 minutes search online for Chevrolet aux auxiliary input interface gm9-aux
@tmuckey10 жыл бұрын
Actually this is using 2 channels the third wire for common is the one to the case. This method does work quite well and sounds good. I do however agree there are other better, easier ways of doing this. This video was more for those that would like to try something new. This was just for fun and to get people thinking. Thank you for your valued input.
@PCDeviceLib10 жыл бұрын
Tim Muckey Hello Tim, thank you so much for giving hope to my old stereo. I don't think my unit is configured for the aux interface and anyway I think it's stupid to pay $40 to get an aux input (considering you can get a nice aftermark radio for less than $100). Can you just please clarify how this is using two chanels? If I correctly understand, one conects jack's pin 1 to ground, pin 2 to the amplifier's side conexion and 3 to FM's side conexion. Is it correct?
@usafa199210 жыл бұрын
Tim Muckey Can you explain how this works with 2 channels. Looking at that Aux port, shouldn't there be 5 wires coming from it? One pair for each channel, and one wire for ground? In the video I only see one pair being used to interrupt the audio on the circuit board. Shouldn't another pair be used as well? Your video doesn't explain in enough detail? I'm used to dealing with left & right audio. Doesn't cutting that trace only cut one channel of audio. Your videos & pictures are the only detailed source of info out there and seems to be the only solution that doesn't require a CD/Cassette in the deck. Please shed some clarity on how the left & right audio is being addressed. Thanks for taking the time to make these videos.
@blueuniform9119 жыл бұрын
oemautosound you are wrong. I have this same exact 2002 radio, and bought the gm9-aux kit you suggested, and it will NOT work. The only way the gm9-aux kit you suggest will work is ONLY if your car or truck also has the SEPARATE CD slave changer unit in ADDITION to the Delco dash Radio. You can plug in the gm9-aux kit to the back side of the Delco Radio all day long, but if there is no SEPARATE CD slave changer unit, you can NOT input anything through the 3.5 aux jack for the radio to play. I hope this helps others so they don't spend the money for nothing. That is why this modification that Tim Muckey posted is VERY helpful!
@oemautosound9 жыл бұрын
You are confusing the PIE GM9-AUX with the inferior aai-gm9 from pac you don't need the slave CD or changer to use the GM9-AUX aux interface
@maciasrick45410 жыл бұрын
can this be done to a 2003 chevy s10 factory radio with RDS?
@SuppaflyZSM10 жыл бұрын
Any chance you've done this for a dodge radio and could post a video?
@christoffl810311 жыл бұрын
do you know how unlock my stereo .says on the screen inop is a car malibu
@BT_Spanky11 жыл бұрын
I have factory GM delco cassette player that I want to do this for.
@paulrhoades407 жыл бұрын
Why don't you just hook in to the wiring harness for the cassette player and not have to go into the radio
@michaelwolf56098 жыл бұрын
or at least tell me the color code for the wiring before the amp
@wwelkss11 жыл бұрын
Can you make a tutorial for CDR 500? Nice vid btw.
@startamer270736 жыл бұрын
Rod Steward
@clasicradiolover7 жыл бұрын
What is the web site?
@h-townrollinworld6997 Жыл бұрын
Can I pay you to my radio?
@trentonjohnson4507 жыл бұрын
05 malibu radio
@mohamedtorky11448 жыл бұрын
hay man i did what i was talking about have aux stereo input check me
@jaredj6316 жыл бұрын
I made a video clarifying the solder points with a higher quality camera for anyone looking to do this. kzfaq.info/get/bejne/mcqga9FqmdO4ZmQ.html
@jet63746 жыл бұрын
your not showing anything, also 1channel??????
@ifuckingfarted4 жыл бұрын
This crap just isn't worth it. Way to much work it's dumb. Just get a new deck. Not expensive can get one for $10. Plug, slide it in, good to go voila. This shit here just isn't worth it.
@servicerepair20137 жыл бұрын
Don't Do an instructional video if you cannot reply to questions makes this video useless to most