UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust kzfaq.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

Welp, I really appreciate your video. Just received a BE 4000 PSI 4gpm washer today freighted in from Florida. From the factory the set screw holding the key down was missing and the key had worked its way lose so I was just getting hose pressure. Your video saved me a lot of time in trouble shooting and now I'll just be waiting on a warranty replacement part to come in.

Just started learning about all these power washer I bought on pallet and all of them had the same problem . Thanks for the time to make the video

At 1:53 you can see the KEY sitting on top of the bearing housing directly above the shaft. Another miss by the builder.

The breather isn’t on there bud. That’s the first thing you do after taking out of box. Take that red cap off the top of pump and put the breather on. That’s why no flow is going through the pump lol.

you forgot to take off that red cap for the oil airflow

You fixed my new Simson power washer. I returned it to Amazon and they refunded me but didn’t want the washer five months ago. I watched your video this morning and mine was the same. Thanks for the help.

The spacer absolutely belongs there. All of these units have the spacer stock from factory. I have a tool store and have sold dozens of this model. I have also seen a few where the key was missing from factory.

In your opinion, are the AAA pumps on these pressure washers good?

Where did you buy these power washers from? They all came in a pallet from a wholesale distributer? I wanna buy some

Hey bro how did you fix the other dewalt with the broken gasline? Because i got a simpson with the exact same model look as the dewalt with the broken i would like to know how you fixed it please

IQuestion I have the same machine and my keeps leaking water from the small orange looking valve that is next to where you hook up the water hose. Can you help why is it leaking ? And second question: I have connected the hoses, turned on the water and pressed the trigger of the gun to let out the air and get "a steady stream of water" but this is not happening even after minutes of holding the trigger. Please tell me what to do. Thanks so much.

How do you know when home depot has those returns ? Thanks

Great video, i learned alot, i have a question, some guy sold me a supposedly brand new 4400psi dewalt pressure washer. We need it to pump water out from a tank like our last pressure washer but it doesnt and only seems to work from a water source that already feeds with pressure. Basically it doesnt pump water out of a tank to the machine

same problem. no pressure. the Key on mine was sitting at the bottom of the pump when i pulled it off. I put it back in the right place and works now. Also had the spacer in mine so i just took it out

You are supposed to replace the red plug with one with a hole in it for air

What engine is used in the DeWalt dwpw3300? It says branded OEM 208cc engine. Is this the same as Honda gx200?

i bought a 3800psi dewalt. It was a return. The store manager told me that one guy came in the morning bought it and returned it late afternoon. He assumed he finished his job because his shoes were soaking wet. I think it was a 1000 pressure washer at the time. I got it for about 600. His excuse for returning it was to powerful

I also have a brand new DeWalt 3600 psi washer with the same problem. Looks like I'll have to take it apart to get any work done. Common DeWalt.

You gotta watch those returns. I saw a guy that bought one at lowes and they had 'dolled up' and painted an old one and brought it in, switched stickers and all. He bought a $300 piece of crap.

Good video. I have a Honda pressure washer is got pressure on the my motor but ones I install the hose and wan no pressure. Any idea? Thank you

Need to know how to remove starter pull rope on dewalt

I bought a dewalt 4400 psi on offerup and it seemed pretty new. But im not sure if the pump was already broken and they patched it up. My question is, will a 4200 psi pump work properly or should i buy a 4400 psi pump?

You’re supposed to take out that Red cap and put in the black oil breather part it came with.

Im trying ti figure out whi mine is now pressurising. When I took off the pump. I had that same ring... My key was there but was portruding a bit.

Question I have the same machine and my keeps leaking water from the small orange looking valve that is next to where you hook up the water hose. Can you help why is it leaking ?

Perfek thak yu bro

How do you find the returns? I never see them at home Depot

Just buy one 3600 dewalt from Home Depot brand new....and it came with that spacer inside!

Great video! Question - my pressure washer turns on but no water or pressure is coming out of the hose, even with a strong flow of water connected to it. How should I troubleshoot?

Mine is not transfer the water to the gun. Needs an air release. It's brand new. How can I get the water to come from the water tank to the gun?

Do they sell keys for this separately. If so where can i find one.

This is the second video that I have seen of yours that the key is stick to the machine, after you pull the pump away....it is laying in there sideways.....you can see it if you watch it again....

a tip for when your spark plugs not finding its thread.. make one lol

What size key? Mine is missing as well

Put the spacer back on,it keeps key from sliding in off shaft!!

No wonder there was an extra key in my box. The trash was never in there.

So you expect to get as much money as a brand new one?. That's crazy. I'm always leery about buying anything from pallets when people ask as much as a brand new unit. I wouldn't pay more than 50% for such units. Some even have the orange sticker from home depot, which clearly shows they are returns.😅

Hola amigo disculpa como se llama la parte donde va conectada la manguera de la segunda hidrolavadora la manguera que va al tanque tengo el mismo problema de la comp se llama esa parte para poder comprarla

Are you in Georgia

But there was a 🔑 sitting above the the shaft hole

You still have the red factory plug in

I took my 4 bolts off and the pump wouldn't come off ....what am I doing wrong????

I got the shaft one time

You have the wrong plug in there it should be a black one not a red one it needs to have a breather on it

They really should just call it a Honda.

That red cap tho 😒

In 36 seconds of this video I saw the problem. Dude forgot to read instructions. Take off red top and install breather. This is called , " faulty customer " not faulty machine lol jk jk

Yeah my Dewalt 3400 psi pressure is an absolute piece of shit as well. Pathetic.

I've got 3 DeWalt products and they are all junk. Including a pressure washer with a Honda engine.

That’s bullshit all of them have the spacer

This pump is trash