Diesel Heater Timer setting on Blue Controller

  Рет қаралды 16,120

Keith Gee

Keith Gee

3 жыл бұрын

Timer 1 is a delay time to start, timer 2 is a delay time to stop.

Пікірлер: 72
@oojimmyflip
@oojimmyflip Жыл бұрын
very clear video and good to hear someone with the confidence to actually speak and tell people how to do it. I like the blue controllers so much that I recently replaced the ecu on my 5kw heater just so I could attach another blue controller and lcd remote. the old style ecu also opens up the possibility of using all the triangle plugged lcd screens. I also had to replace the wiring loom to. I have a 2kw diesel heater mounted to my driveway wall in a harwood ply box taking air from my kitchen and pumping hot air into my living room and at 2.0 Hz it uses about 14 pence of fuel an hour to heat my 2 bed semi detached house to 20 degrees C all day from 8am to middnight which is far more effiecient than our 32kw gas central heating boiler. Gas prices got to a point where our gas boiler was using around £12.00 a day to heat and cook on gas to now thats as little as £2.00 a day so runing the diesel heater has saved us a lot of money so far. When charities on the news go on about fuel poverty this is what they should be installing in peoples homes it might even save lives in the long run.
@geenote
@geenote Жыл бұрын
I like the way you think. Thank you for sharing!
@74willy81
@74willy81 3 жыл бұрын
Finally a clear concise and well presented tutorial for adjusting the timer on these controls. Actually this is one few tutorials of any kind on YT that is done on a professional level regarding clear voice and video. LOL A rare art it seems. Anyway you have it aced. Thank you!
@geenote
@geenote 3 жыл бұрын
LOL! I figured if it was taking me a while to figure it out then maybe I could save someone else some time and aggravation. Thanks I appreciate it!
@The1980toyota
@The1980toyota 3 жыл бұрын
Thanks Kieth of course I have the blue controller and appreciate any tutorials u could offer. Cheers
@geenote
@geenote 3 жыл бұрын
The timers in my blue controller were giving me a fit and I could not find any correct instructions. Once I figured it out, I thought I might save someone else some time. Thanks!
@MrChristian13
@MrChristian13 3 жыл бұрын
Thank you very much. What gave me a headache - I have the other controller (black one) and it works with this count down timer. Thanks for the video, it helped me a lot.
@geenote
@geenote 3 жыл бұрын
Awesome! Thanks for the feedback!
@hhawg1
@hhawg1 3 жыл бұрын
I have the all in one with the blue controller but no remote. Going to be installing it in my motor home this week. Thanks for the tutorial.
@geenote
@geenote 3 жыл бұрын
I think you can purchase the remote separate. It is very handy and has a display that shows the current heat setting.
@ExpediteTravels
@ExpediteTravels 3 жыл бұрын
Very informative thanks Keith
@geenote
@geenote 3 жыл бұрын
I probably wont use the timers but at least now I know how. Thanks!
@athanasiosdrakopoulos1519
@athanasiosdrakopoulos1519 Жыл бұрын
Haven't tried yet but thanks for the good and clear information!
@geenote
@geenote Жыл бұрын
Play around with the timer settings and keep in mind they are delay timers. 👍
@mickward2775
@mickward2775 3 жыл бұрын
Thank you. I could not find out how the timer worked or how to set it . I have a 5 kw in my micro camper van and the timer function is nice when I'm going to bed I turn the heater off after it warm inside turn it off and then set the timer for 2 hours after I go to bed and it runs for 4 hours and when it cools down it's time to get up for work. Thanks again
@geenote
@geenote 3 жыл бұрын
Perfect way to use the timer function. Took me a while to figure it out but a very useful feature. Thanks!
@nikolaju6
@nikolaju6 2 жыл бұрын
Ty 🤟
@geenote
@geenote 2 жыл бұрын
👍
@Cementhead48
@Cementhead48 3 жыл бұрын
Than, you. Just ran mine and learning the controller. Is there a temp for the heater temperature?
@geenote
@geenote 3 жыл бұрын
You can select to run the heater in a sort of automatic/temperature mode or a manual/pulse mode by pushing 2 buttons at the same time (settings or OK button with one of the arrow buttons). In manual/pulse mode you change the pump pulse rate by changing the hz setting and the heater stays running constant at that setting. In automatic/temperature mode you set the desired temperature in Celsius and the heater will try to maintain that temperature by running at a higher setting until the desired temperature is reached then drops to low setting. Hope this helps. Thank you!
@garyreed354
@garyreed354 3 жыл бұрын
@@geenote and if you go into the settings inside the machine and raise the low setting to like say 2.1 when you're in the automatic mode it'll drop to the 2.1 instead of down to 16
@brendandoolan7838
@brendandoolan7838 Жыл бұрын
When set up will it repeat at the same time next day and so on.
@geenote
@geenote Жыл бұрын
No. It has to be reset every day.
@sjobusen335
@sjobusen335 Жыл бұрын
What happens if you set the heater on lowest setting (+8 degrees) and the heater reach that temperature? Will it automatically turn off and then turn on again when it gets colder ambient temp?
@geenote
@geenote Жыл бұрын
The unit will not turn off. It will just run on the lowest setting once the room heats up to the set point unit the room cools back down, then the unit will start to ramp back up trying to maintain the set point temperature. The controller has to be inside the room being heated to use the "temperature mode". I run mine only in manual mode.
@sjobusen335
@sjobusen335 Жыл бұрын
@@geenote Thanks for your answer :)
@adventurewhitasiam
@adventurewhitasiam 9 ай бұрын
Do wee are able to ajust the temp for exemple at 14 celcius and whend the temps weel be at 14 celcius, this air heather will start ?
@geenote
@geenote 9 ай бұрын
The temp setting only controls the heat and blower speed. The heater will try to maintain the set point by speeding up or slowing down but never shuts off. Once the set point is reached, the heater stays on the lowest setting.
@Veikra
@Veikra Жыл бұрын
somebody probably made a open source controller for those. And with actual hour of the day based timer
@geenote
@geenote Жыл бұрын
That would be nice!
@Veikra
@Veikra Жыл бұрын
@@geenote Ive got so may projects but it's something I can actually do.
@Jp2209
@Jp2209 Жыл бұрын
Yeah I set mine for 9 hours and sometimes it's like it's still counting down so I'm not sure what I'm missing
@geenote
@geenote Жыл бұрын
Try setting T1 for "now till on" and T2 for "now till off".
@wiesawbaranowski3935
@wiesawbaranowski3935 2 жыл бұрын
Witaj, nic mi nie wychadzi !!!Czy jest mozliwe ustawienie zeby za 12godzin sie włączył? dzieki pozdrawiam
@geenote
@geenote 2 жыл бұрын
Set timer 1 to 12:00 and set timer 2 for how long you want it to run. It will delay for 12 hours then start to run. It will run the amount of time entered on timer 2.
@wiesawbaranowski3935
@wiesawbaranowski3935 2 жыл бұрын
Witaj,juz tak robiłem ale to działa tylo 1dzien po godzinie 24:00 juz sie nie uruchamia..Teraz go oszukuje ustawilem o godzinie 19:00 ze jest 7:00 i to moze zadziałac ? Bardzo dziekuje
@geenote
@geenote 2 жыл бұрын
Unfortunately the timers have to be reset every day. Timer 1 delays the start time, timer 2 delays the shut down time. "12:00" in timer 1 would delay 12 hours before start, "13:00" in timer 2 would delay 13 hours before stopping, so the heater would wait 12 hours and run for 1 hour before shutting down with these settings as an example. After the timers complete the cycle, they have to be reset all over again.
@wiesawbaranowski3935
@wiesawbaranowski3935 2 жыл бұрын
@@geenote Witaj 1.przestawienie zegara nie pomogło się nie uruchomił 2 Potrzebuje dzisiaj o 17 :00 po południu zaprogramować żeby JUTRO rano o godzinie 6:00 rano się uruchomiło czy jest to możliwe zwżywsz ze to JUTRO Pozdrawiam i dziekije za pomoc
@wiesawbaranowski3935
@wiesawbaranowski3935 2 жыл бұрын
W tym samym dniu sie uruchamia
@scotthoder9172
@scotthoder9172 2 жыл бұрын
how to change to Fahrenheit
@geenote
@geenote 2 жыл бұрын
Not possible. Stays in C.
@garyreed354
@garyreed354 3 жыл бұрын
Mine if you do your settings one day the settings are usually still there by the next day just have to turn it on
@geenote
@geenote 3 жыл бұрын
Yes I think that is the same with mine. The time entered on timer 1 and 2 will normally stay entered in there but the timers turn off after finishing the cycle and have to be turned back on to use them again. I don't like how I would have to turn the timers back to "on" every day at the exact time every day to get the heater to cycle on and off consistently day to day. Seems like one should be able to set the time to come on and time to turn off and then just turn the timer on. Oh well... good thing every one doesn't thing like me. Thanks for pointing that out.
@garyreed354
@garyreed354 3 жыл бұрын
@@geenote the first kind kind of came with the heater work had a regular clock on it can win it all
@geenote
@geenote 3 жыл бұрын
@@garyreed354 Sounds like a better design.
@garyreed354
@garyreed354 3 жыл бұрын
@@geenote it would be if it didn't fade out and who knows maybe one of those red fobs would work on one of those as well
@geenote
@geenote 3 жыл бұрын
@@garyreed354 I think you can swap out different controllers
@MrMarkAMartin
@MrMarkAMartin 3 жыл бұрын
Does any English speaking person in the world know how "Plateau Adaptive Function" for altitude adjustment works on the new Blue or Red controllers with lcd remote? The digital black controllers are adjusted in Advanced settings by adjusting hgh low and pump speed/fan speed- know that. How do the blue controllers adjust with "Plateau Adaptive Function". Thanks in advance, frustrating search for info after marketing BS about it being "easy"
@geenote
@geenote 3 жыл бұрын
I have the blue controller and can use one of two different password numbers to access the factory screen. "1688" or "9009" will allow me to get into the factory screen and make adjustments to min and max pump rate and fan speed. Hope this helps.
@MrMarkAMartin
@MrMarkAMartin 3 жыл бұрын
@@geenote thanks, I want to know how the altitude adjustment function works, I have the black control and know how it doesn't work except manually
@geenote
@geenote 3 жыл бұрын
@@MrMarkAMartin My controller shows the correct current altitude but I don't know if it changes any settings that depend on the altitude or if it is adjustable. If you get any correct information I would be interested in knowing. Thanks.
@MrMarkAMartin
@MrMarkAMartin 3 жыл бұрын
@@geenote I'm tracking info down and will certainly share what I find. It would seem that the manufacturer would be motivated to educate potential buyers, language barrier or not- this issue of Chin-Englis translations seems more like a 1920 problem than a 2020 problem, I just don't get what keeps the knowledge gap so wide.
@MrMarkAMartin
@MrMarkAMartin 3 жыл бұрын
@@geenote I did find a pdf of the blue controller explaining buttons symbols etc- do you want it?
@garyreed354
@garyreed354 2 жыл бұрын
You have it wrong on the second timmer. It is set from now till.off FROM NOW TILL ON %FROME NOW TILL OFF
@geenote
@geenote 2 жыл бұрын
I think you are right. I never use the timers but realized they are delay timers. What happens if you enter a larger time in timer 1 than timer 2? Like 15 min on timer 1 and 10 min on timer 2? It can't shut down before it starts...🤔 Thanks!
@garyreed354
@garyreed354 2 жыл бұрын
@@geenote if u set 2 for 10it will go off and then the other for 15 it will. Come on 5 minutes later or it will do nothing if it's the other way around
@adicmx
@adicmx Жыл бұрын
@@geenote yes , the situation that you are describing and the result is correct. I set mine with 1 -13h and 2 with 3h (hoping that it will start in 13 hours and stop after 3 hours of running) but the next day the heater was still running and no timer icon in the display.
@geenote
@geenote Жыл бұрын
@@adicmx Did you try setting Timer 1 for 13:00 and Timer 2 for 16:00 ?
LOVE LETTER - POPPY PLAYTIME CHAPTER 3 | GH'S ANIMATION
00:15
MEGA BOXES ARE BACK!!!
08:53
Brawl Stars
Рет қаралды 36 МЛН
БОЛЬШОЙ ПЕТУШОК #shorts
00:21
Паша Осадчий
Рет қаралды 9 МЛН
How To Set The Timer On The New Blue Chinese Diesel Heater Controller With The Spanner Button
4:56
Van Life Uk A Complete Survivors Guide
Рет қаралды 2,3 М.
Chinese diesel heater Blue controller #kerosene #31
11:10
Deano's Workshop
Рет қаралды 978
Having trouble setting the timer? | Chinese Diesel Heater
4:07
Different Style Diesel Heater Controller
7:24
Ugly Topper
Рет қаралды 51 М.
How To Set Chinese Diesel Heater Temperature Controller Settings
3:52
The Campervan Builder
Рет қаралды 122 М.
Diesel Heater New Type Controller
15:12
Mic S
Рет қаралды 152 М.
CHINESE Diesel Heater - LCD Controller, Remote Pairing & Temperatures
7:22
Sam's Motor & Machine
Рет қаралды 159 М.
New Blue LCD screen Vevor Chinese Diesel heater
14:08
Storm Norm Leduc
Рет қаралды 55 М.
Ахахах 👅
0:44
Dragon Нургелды 🐉
Рет қаралды 1,5 МЛН
رورو ضد رقيه🔫😲🚀 #shorts
0:13
رورو فاميلي | Roro Family
Рет қаралды 25 МЛН
When dad sneezes 😱😵‍💫 LeoNata family #shorts
0:26
LeoNata Family
Рет қаралды 3,6 МЛН
😆 @SantiOficialll @SantiFansshort @CAMILOAGUILLONN
0:15
Santi
Рет қаралды 8 МЛН
i respect girl #respectshorts #respect
0:32
Movie Copy
Рет қаралды 25 МЛН