DIY "High End" Guitar Body | Routing / Evertune / Finishing etc.

Рет қаралды 31,732

ML Sound Lab

4 жыл бұрын

Be sure to follow my buddy Janne @irotlas on Instagram: / irotlas
ML Sound Lab: ml-sound-lab.com/

Пікірлер: 49

@KaiDown 4 жыл бұрын

Man, that teal going on looks so damn satisfying

@mlsoundlab 4 жыл бұрын

It's an ML approved color scheme. ;)

@m3m3sis 4 жыл бұрын

Kiitos MIKKO! Especially for this but for your contributions to the modern day metal and guitar production!

@mlsoundlab 4 жыл бұрын

Aww thank you so much Pablo.

@toemasmeems 4 жыл бұрын

I'm a sold fan man I bought the Orng sound pack and it fixed literally all the problems I've had with my Two Notes IR's. Also dl'd Mikki Cab Sim and it's amazing. AND THEN YOU MAKE A GUITAR HELL YEAH

@Joey.Darkwoods-Studio 2 жыл бұрын

That is killer.... the color man... wow.

@ZachWish 4 жыл бұрын

Man this rules. Thanks so much for sharing.

@JaredGunstonTV 4 жыл бұрын

vvery cool man!!

@BartekEVH 3 жыл бұрын

Fantastic!! I love to watch it. :)

@opetja2279 3 жыл бұрын

what a beautiful guitar 😻 respect from Serbia bro

@georgepelekoudis 4 жыл бұрын

Nice work guys!! That was fascinating to watch, especially the Evertune section. That finish is gorgeous. Could this be the basis of an ML Soundlab virtual instrument 😂? Stay safe :)

@jeffsternon5062 2 жыл бұрын

Nice Job Mikko ! Good to see someone create his own guitar and put an evertune in it (I did it too on my channel :p ). Btw, I recently tested your amp models, they sound great !

@jeffcrist2977 2 жыл бұрын

Nice work.

@hogblockula9335 3 жыл бұрын

sooo sick

@ChessmasterHex 4 жыл бұрын

Would love to have an ML sampled virtual djent guitar library 😉

@punith.basavaraju 4 жыл бұрын

Butt of someone with smooth skin 😂😂😂. Mikko the champ

@mlsoundlab 4 жыл бұрын

Words are like poems - they just come to me.

@cpfs936 3 жыл бұрын

Wow! Didn't realize an Evertune took out about as much wood as a trem!

@jakubnowacki5537 3 жыл бұрын

It's even more I'm afraid :)

@alensarajlic3236 3 жыл бұрын

R E S P E C T Wow :)

@_ajguerra_ 3 жыл бұрын

Beautiful guitar 🤘🏻. What did you use under the bridge pickup for support since there is no wood under the pickup due to the Evertune?

@cris_viga_loca 3 жыл бұрын

great! what is the power of your Einhell bend saw ??

@kjemradio 3 жыл бұрын

Lacquer melts into each layer. Sanding in between coats isn't really necessary. You can put all of your layers on when each dries. Level sanding between coats applies to polyurethane.

@eamonnparsons3155 11 ай бұрын

Question! It's been 3 years since the build obviously, I'm going to be building my own guitar shortly and have watched endless amounts of build projects here on KZfaq and everyone has varying approaches, particularly to finishing. My question being, did you get any shrink-back on the paint that has revealed some of the wood-grain beneath over time. Or did Janne do a pore-fill on the wood prior to the base-coat that just didn't make it into the video?

@salatinoable 2 жыл бұрын

Before epoxy , are u sanding filler on body before? thanks

@garikdjan6266 3 жыл бұрын

Who will hook up what strap and pickups on the guitar?

@lorenzovega2465 3 жыл бұрын

what type of wood is it?

@dudubok8706 3 жыл бұрын

Is body from alder?

@LeMans512 3 жыл бұрын

A chamfered edge.

@Hagstrom4ever 4 жыл бұрын

Mikko, the guitar is beautiful, it reminds me the JP6 which I honestply prefer to the Majesty. Do you know if your friend build the same guitar with floyd? Thanks a lot. P.S. and great color choice :-)

@Ritolah 4 жыл бұрын

No, I don't really like floyds. I've made few guitars with schaller vintage tremolos and they are awesome, just like MM jp6 trem. Also the Ibanez Synchronizr is great but really hard to find...

@Ritolah 4 жыл бұрын

.. Btw the body shape is basically hybrid between jp6 and jp13 with different neck heel

@MadSteexProduction 4 жыл бұрын

No any sanding process between each paint?

@mlsoundlab 4 жыл бұрын

Honestly - that's the part where I wasn't filming so I'll have to check with Janne. The truth is there's a ton of sanding between every process and we just didn't want to make a video with 75% of the material is just sanding. :D

@MadSteexProduction 4 жыл бұрын

@@mlsoundlab yeah I just wanted be sure cause I did in past this process but saving time without any sanding process between each paint would have been great.

@Ritolah 4 жыл бұрын

Two primer coats were sanded smooth before the white color coat. You don't sand the color coats.. then 2K clear on top.

@mlsoundlab 4 жыл бұрын

@@Ritolah Cheers buddy! Now go make me another guitar.

@TriumphWithoutGlory 4 жыл бұрын

what pickups are into it ? :)

@mlsoundlab 4 жыл бұрын

DiMarzio Titans. :)

@TriumphWithoutGlory 4 жыл бұрын

@@mlsoundlab Great choice I like di Marzio pickups too, have you ever tried the fusion edge ? :)

@bergglobus2428 4 жыл бұрын

The neck would scare me to build

@mlsoundlab 4 жыл бұрын

Oh yes it's very different than building a body. You never realize the amount of work the small things require.

@bergglobus2428 4 жыл бұрын

@@mlsoundlab yeah I always wanted to build my own guitar but the neck really turned me off, because it requires you to be so precisely as well as a lot of tools and importing a warmoth neck to the EU is quite expensive. At least to Germany. Anyways your guitar looks killer and I dig the shape. Enjoy playing it!