DIY how to paint your vpin cabinet!

Рет қаралды 4,872

8 ай бұрын

Episode#40 Custom Virtual Pinball Cabinet Tutorial Series Extravaganza!
In this video I will show your everything you need to know to be able to prime and paint your virtual pinball cabinet and wet sand it for paint/vinyl.
I will also show you 3 different methods of paint from brushes/rollers to using an electric hvlp gun to using a professional hvlp gun......I teach it all and show you the results so you can pick your method!
As I go I will talk about stuff you can do to make this easier, more enjoyable, and things you can do to improve the outcome of the paint and vinyl artwork.
Loving the vpin series? Share with your friends and get them interested in building a vpin.....it's never been easier!
Link to my parts video for all the info/links to all of the parts you see missing from this cabinet that will be going back in!
• Virtual Pinball Parts:...
These links will take you to the parts I used in this video/filming gear and help support my channel! As an Amazon Associate I earn from qualifying purchases. I get commissions for purchases made through links in this post.
Rustoleum oil based paint amzn.to/3EAk2uA
Rustoleum spray paint cans amzn.to/3PelGa9
Zinnser oil based odorless primer amzn.to/3R9PHL4
Wagner electric HVLP spray gun amzn.to/488wzmy
Devilbiss HVLP spray gun kit amzn.to/3RgPEwR
Odorless mineral spirits for cleaning amzn.to/3qZuybX
Acetone for thinning amzn.to/3P55196
Paint brushes amzn.to/3PggmDg
Paint roller kit amzn.to/3Px5UYr
Kraft paper for covering surfaces amzn.to/3sM2lpx
painter's plastic drop cloths amzn.to/486y1pF
painter stand offs amzn.to/44HB58F
painter's tape amzn.to/3RlQvwB
Japan Drier amzn.to/3PB8opW
paint funnels amzn.to/48cHyM6
paint mix cups amzn.to/462Q3r5
Durablock sanding block set amzn.to/48c0cDu
Wood filler amzn.to/3NJpS19
Putty knife amzn.to/44e3Bj5
Sandpaper amzn.to/3Q5JNu3
320 grit wet sandpaper amzn.to/3LjLYH4
1/4 sheet palm sander amzn.to/3D3HzmX
Festool orbital sander amzn.to/44ANhbH
6" orbital sanding discs amzn.to/3rlJSiP
Festool HEPA vacuum amzn.to/44CWIY8
Tac cloth amzn.to/3Q5JUFZ
Filming gear:
Canon M50 camera amzn.to/3x53c3v
Canon M50 AC adapter amzn.to/3JTaMpe
Canon lens filters/protective covers amzn.to/3HO6fBQ
Rode Wireless Go 2 amzn.to/46eIzl2
Smart Phone tripod with cold shoe mount amzn.to/3RSQUEP
GoPro suction cup mount amzn.to/3DSQHvJ
GoPro head strap and quick clip amzn.to/3RMXxIB
GoPro Media Mod amzn.to/3YESM6r
GoPro Light Mod amzn.to/3YfQsml
GoPro Chest Mount amzn.to/3HFlvAU
GoPro Dual battery charger and battery amzn.to/3DV0xNA
If you would like to make my vpin cabinet, here is a link to the free plans!
sdssautomotive.wordpress.com/...
If you design your own, I'd love to see it! Send pics/video to my DM on Instagram!
If you would like to keep up with behind the scenes info, pictures, and videos, follow us at / way_of_the_wrench
If you enjoyed the video, learned some cool tech tips, I would appreciate it if you could share out the channel on your social media so I can help more people! Thanks for watching and if you hit the post notification bell, you will know when our next videos are out!
Music for this very special episode by :
🎵 Song: Pyxis
🎧 Artist: HOME
• HOME - Pyxis [Synthwav...
Promoted by Royalty Free Planet: royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
Alchera by Shenzei
/ shenzei
Promoted by Royalty Free Planet: royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
失望した by EVA
joshlis.bandcamp.com
Promoted by @RoyaltyFreePlanet - royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
Thanks to Teknoaxe for his royalty free music for our intro/outro music. Please check out all of Teknoaxe's sweet music tracks!
www.teknoaxe.com
Intro music is Synthwave D
www.youtube.com/watch?v=WNDvO...
Outro music is Sythwave E
www.youtube.com/watch?v=RBxnY...
Disclaimer: These videos are intended for entertainment, inspiration, and educational use only. Working in a woodshop, metalshop, or autoshop is dangerous without proper safety and experience. Always seek professional advice and training before using any power tools/machinery. If you have any uncertainty before performing any shop procedure, stop and learn a safe method/technique. Do not attempt anything simply because you saw it in one of my videos. Be smart, use common sense, respect your power tools/machines, and be safe.

Пікірлер: 87

@dirtnaps 4 ай бұрын

"Maybe it's me Bill.. but I swear when I left Friday I didn't see this black mist on the windows of this green car". But seriously, this series is fantastic with the level of detail you provide that goes above and beyond standard how to videos. Very well done and produced.

@wayofthewrench 4 ай бұрын

Bill's a knob and that's his car.....he doesn't work here anymore.....lol. yeah I hear ya about the over spray but it was actually pretty minimal. If it was a car I cared about, it would have gotten covered or better yet, a spray tent constructed. Thanks for the watch and I'm glad you are enjoying the series. Hopefully I earned your subscription today. Thanks for the watch and your support for the channel!

@user-xd6fl2hs8i 8 ай бұрын

This series and channel provide by far is the most quality information per minute of anything available anywhere. So well done every video. Truly inspiring watching and soaking it in. Thanks! This is why I am immersed into this hobby.

@wayofthewrench 8 ай бұрын

Thank you very much for your kind words, I appreciate it! I work super hard on making the best videos I can so it's always nice to hear from subscribers. I just wish KZfaq would recommend my videos more cause it's hard to be seen in a sea of content out there. Yeah it's a wonderful hobby and I'm glad I found out about it. Thanks for the watch and your support for the channel. Cheers!

@weekendinteriors8971 8 ай бұрын

5 cabs under my belt now. I've used KILZ 2 All-Purpose primer (white) as a base with Behr Ultra Semi-Gloss (black) top coat. All applied with an HVLP sprayer. Then wrapped with 3M vinyl (sides, front, apron, dmd panel, and back box sides). So far no issues at all with peeling and the cabs look great. Thanks for the great video as always WotW!

@wayofthewrench 8 ай бұрын

5 vpins? Awesome! You make em for friends or profit? That Behr a polyurethane? Thanks for the watch!

@soma_rc 8 ай бұрын

Man you sure know how to pick great tunes for your videos 🎶

@wayofthewrench 8 ай бұрын

Man I try, you have no idea how hard it is to find decent royalty free music. Thanks for the watch!

@EvilNuff 8 ай бұрын

This is such a fantastic series and so helpful. I love how you show the importance of cleaning up at the end of the video, too many youtubers skip those parts.

@wayofthewrench 8 ай бұрын

Thanks Bruh! It does make the videos longer but it's seriously the info people need/want to know so they can be successful. Thanks for the watch!

@MandoMike 8 ай бұрын

"Like Glass" Looks Great!

@wayofthewrench 8 ай бұрын

Thanks! Yeah if you take your time you can make these panels flawless.....that is until you start using it. Absolutely perfect finishes will show every little mark/scuff/fingerprint. Just go till you're happy with it, then enjoy it. Cheers!

@gerhardbicker1473 8 ай бұрын

As on every video before, it's a real pleasure to listen to you, it's amazing how well prepared you are and how easy I can follow you. THANKS A LOT!

@wayofthewrench 8 ай бұрын

So nice of you, I try hard to make the very best videos I can so it's always nice to hear from subscribers. Thanks for your support for the channel and thanks for the watch!

@robertbrugger1803 8 ай бұрын

Great job Emil, very detailed with lots of tips and methods. You are truly a giving person. Thank you for all you do.🔧🔧

@wayofthewrench 8 ай бұрын

My pleasure! Happy to share my knowledge and experience with ya guys! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Thanks for the support and the watch! Cheers!

@robertbrugger1803 8 ай бұрын

@@wayofthewrench sounds like a great idea, I have shared your talents on my Facebook account with friends.👍🏻

@wayofthewrench 8 ай бұрын

I really appreciate it Robert! Cheers!

@Urko2005 8 ай бұрын

You did good with your build over the months , and helped me with mine immensely.

@wayofthewrench 8 ай бұрын

Thanks bud! Happy to help! Cheers!

@jasongilpin5124 8 ай бұрын

Hell yes! Been waiting for this!

@wayofthewrench 8 ай бұрын

Lol, glad I could get this out for ya. Thanks for the watch!

@Kennebec27 8 ай бұрын

Very impressive. The way you explain everything is incredible. I'm glad I found your videos.

@wayofthewrench 8 ай бұрын

Appreciate your support for the channel! I'm glad you found me too! If you deem me worthy, I'd really appreciate it if you could share out my channel on your social media so I can help more people. Cheers!

@sailingsvzara 8 ай бұрын

Spraying paint near those cars made me nervous. lol. :)

@wayofthewrench 8 ай бұрын

Yeah if there is something that you don't want to over spray on, ya gotta cover them up. These cars are on their last legs for sure so no worries. Literally nobody cares about a 1991 Ford Escort.....lol. thanks for the watch!

@MrPhilip201 8 ай бұрын

havent watched your videos for a long time. It's nice to see that you are still going with the project, that you have fun and that you make us such awesome content. 😊

@wayofthewrench 8 ай бұрын

Yeah it's been a while now cause I took my sweet time building and filming the series. Each video seriously takes 20-40 hours to make/build/edit. Glad you are enjoying them. Cheers!

@michaeloertel3054 8 ай бұрын

Love these pinball videos!!! Look forward to every one of them.

@wayofthewrench 8 ай бұрын

Glad you like them! They're a ton of work so I'm glad people are enjoying them. Thanks for the watch!

@DanielBreitschaft 8 ай бұрын

Fantastic, eagerly awaiting the next episode! Thanks man!

@wayofthewrench 8 ай бұрын

Thanks! Glad you're loving the series! Cheers!

@TheAfroman 8 ай бұрын

I’ve been using Shellac. Get a nice one. Roll on, and sand smooth. Second coat. Sand. Flat, and sealed. Cheap too.

@mikeyfoofoo 8 ай бұрын

I used Aquacoat wood-filler then Shellac too under suggestion from a specialty woodworker store. I told them I was going to vinyl it. I haven't done the final paint job though. They said anything would stick to Shellac.

@wayofthewrench 8 ай бұрын

Nice! How does the vinyl artwork stick to it? Any issues?

@TheAfroman 8 ай бұрын

@@wayofthewrench none at all. The shellac provides a smooth glass like finish and I have had art work in the side of my TMNT machine for 2 years now not a single issue.

@wayofthewrench 8 ай бұрын

Ok cool, good to know. I'll add it to the list.

@thetopshed 8 ай бұрын

Keen to see the artwork!

@wayofthewrench 8 ай бұрын

Next video up is the vinyl artwork install! Thanks for the watch!

@dunderdotten 8 ай бұрын

Amazing work and skills! Its all coming together now :D What a ride!

@wayofthewrench 8 ай бұрын

Thanks bud! Now more people can learn to be skilled too! Yeah it's almost there.....just wait for the vinyl! Thanks for the watch and supporting the channel!

@Vector-kz2nx 8 ай бұрын

Gracias por el video. Esperaba ansioso!!!!

@wayofthewrench 8 ай бұрын

Glad you liked the video! Cheers!

@gilabides 8 ай бұрын

The moment I’ve been waiting a year for.

@wayofthewrench 8 ай бұрын

And? How was it? Lol.....thanks for the watch!

@gilabides 8 ай бұрын

@@wayofthewrench I now have the knowledge to confidently prep and paint my cabinet when I finally get going on it. …also, I can now armchair review others paint jobs and judge them. Thanks for all you do, sir.

@wayofthewrench 8 ай бұрын

Nice! You'll have to send some pics when you're done. Cheers!

@cdh76 8 ай бұрын

Nice

@wayofthewrench 8 ай бұрын

Thanks!

@robe4314 8 ай бұрын

Oh man I just ran out of videos in this series and a new one shows up!

@wayofthewrench 8 ай бұрын

Lol..this series will never end. Thanks for the watch!

@Jewer76 8 ай бұрын

Looking good Emil :D Absolutely gave me flashbacks to my own spraying and sanding of my cab. I sealed the wood with wood filler before painting, but I am not sure it was absolutely necessary since I used high grade ply. For paint I used (way too many) spray cans which did a fantastic job, but since I put vinyl on it, it was probably once again way overkill ;) On the visible part on the inside I actually used semi glossy black vinyl, since I found it a bit stronger when taking the playfield TV in and out. Good luck going forward. So many new tables are waiting for you when you get it all assembled again :D

@wayofthewrench 8 ай бұрын

Lol...flashbacks. Sanding can do that. Yeah my cabinet grade ply was pretty smooth too. I could have spent some more time and done a couple more coats but I was really happy with the finish. Yeah I've got some catching up to do with 64 but and vpx 10.8 and the new pov. Plus the new tables...looking forward to trying Spongebob!

@ynnebbenny 8 ай бұрын

Ha ha, glad you got rid of the Rabii look, mid way through. ;) Love you videos !!

@wayofthewrench 8 ай бұрын

Lol....I look like a rabii? Oh man, maybe I gotta keep it trimmed better..lol. Thanks for the watch and your support for the channel!

@ynnebbenny 8 ай бұрын

Yeah but a a pretty cool rabbi though! 😊

@wayofthewrench 8 ай бұрын

lol....I could pull it off.

@ynnebbenny 8 ай бұрын

Hmm maybe a good name for a KZfaq channel. " The Pinball Rabii" BTW, I used quite a bit from your channel to complete my table. I can't bare to pull mine down and paint it though. Because its made out of black formply, its semi acceptable for the moment.

@wayofthewrench 5 ай бұрын

It wasn't that bad. Besides, half the fun is the building! Cheers!

@HomeArcadeInABox 8 ай бұрын

Killz white primer, Behr black satin or a semi gloss is nice. Worked on my last cabinet. Decals are fine. Let it cure for a week as well.

@wayofthewrench 8 ай бұрын

Nice! Is that Behr an enamel or polyurethane or? Thanks for the watch!

@HomeArcadeInABox 8 ай бұрын

Regular acrylic house paint.

@wayofthewrench 8 ай бұрын

Water based?

@HomeArcadeInABox 8 ай бұрын

You bet, Water Based from Home Depot.

@wayofthewrench 5 ай бұрын

Yeah water based for the win!

@GaryStephenJones 8 ай бұрын

Great work. And I’m about to spray my horse box so some great tips in here that’s transferable. The only issue I had was you spraying your garage doors with overspray. Dude 😮 😂

@wayofthewrench 8 ай бұрын

Horsebox? Yeah a little overspray on 40 year old bay doors in an autoshop ain't gonna bother me. I was actually thinking it would be cool to do some graffiti artwork on them to liven up the shop. Thanks for the watch!

@GaryStephenJones 8 ай бұрын

@@wayofthewrench yeah I’ve never used spray gun before so set up tips about spray width on cardboard and clean up was handy thank you. I’m midway converting horsebox to a food trailer. Your garage doors looked so perfect that’s why I mentioned them. But if you plan to graffiti them anyway it doesn’t matter. Keep up the great content.

@wayofthewrench 8 ай бұрын

No worries dude! Yeah they have that patina of a 40 year old paint job. Cheers!

@TabascoFinger 8 ай бұрын

Incredible amount of work, dedication and attention to detail.. slapped mine together and still isn't finished.. too many tables to play lol

@wayofthewrench 8 ай бұрын

Thanks! Yeah it's a labour of love for sure....and you're never really done. I'm excited to upgrade vpx and get me some new tables too! Thanks for the watch!

@billiamthesecond 8 ай бұрын

Any thoughts on hybrid paints? I've seen them recommended a lot for cabinets (in general), but I don't know if they have issues with vinyl adhering

@wayofthewrench 8 ай бұрын

Are you talking about the polyurethane paints or the modified latex ones? Anything latex scares me as they are prone to breathing and lifting vinyl. I'm not 100 percent sure about them but hopefully some builders can chime in here and let people know what water based paints work well with vinyl decals. Thanks for the watch!

@mikeyfoofoo 8 ай бұрын

Perfect timing. I used Aquacoat to wood-fill. Then I used clear Shellac with a couple coats with light sanding in between. It feels like glass (and looks great) but I haven't done the paint job on it yet. - I can't decide. I have a Wagner electric, but I also have a good compressor. That DeVilbiss oil sprayer looked really smooth. Dang! I now want one of those. What would you prefer?

@wayofthewrench 8 ай бұрын

Sweet! Glad it's available for ya to finish your vpin! If I could pick, I would only use an hvlp spray gun for everything. The finish is way better and it's fast. Lots of overspray though. The Wagner is ok but it comes out chunkier even when you thin. Have fun and thanks for the watch!

@deadmousyplutaprestige8771 8 ай бұрын

You looked 10 years younger once you switched to the wagner. Stick with that!

@wayofthewrench 8 ай бұрын

Lol, took me a second to figure out what you meant! Yeah it got hot in the Summer mid video, so the beard got whacked! Thanks for the watch. #babyface

@splugereport 5 ай бұрын

Awesome work but all that work just to wet sand. Next time melamine :)

@wayofthewrench 5 ай бұрын

Thanks! Yeah the wet sanding ensures a flat surface so the vinyl sticks and nothing shows through like bumps. It's a lot of work but hey, that's what makes it pop when you're done. Thanks for the watch! Cheers!

@jcinsaniac 8 ай бұрын

If you had access to a pancake compressor and wanted to paint a cabinet , knowing that most spraying rigs need a lot more CFM and you did not want to spend more than $100 - $150 US, how would you proceed? Love watching this stuff, I just built a cabinet and finishing will be coming soon! As an alternative, ever heard of ebonizing wood? Any thought on that versus painting?

@wayofthewrench 8 ай бұрын

You could use the other 3 methods to paint instead (rollers, electric hvlp, or spray cans). Or you could rent a proper compressor. Or take the parts to someone to spray it. Remember almost everything gets covered by vinyl so really you're only worried about the front of the blackbox, back of blackbox and back of cabinet. I'm not sure about ebonized finishes, it's really just a preference of the look of it and whether vinyl art work will stick to it. Thanks for the watch, cheers!

@danw3735 8 ай бұрын

I just used Black MDF primer and sealer paint on mine with both roller and paintbrush. Honestly mine is just slapped together compared to your masterpiece.

@wayofthewrench 8 ай бұрын

Hey most of it is covered by vinyl anyways and even if it's not vinyl covered, a decent roller finish can look great too. Thanks for the watch!

@ftsrecords5052 8 ай бұрын

A little Over-Kill with the paint being that it’s going to be wrapped in vinyl but whatever it’s your Rabbit Hole.

@wayofthewrench 8 ай бұрын

I used $15 of top coat paint so I'm not worried. The whole project is overkill if you think about it..lol. I played on the floor with just the monitors for 8 months...lol. thanks for the watch!