Dodge ram 4 x 4 1500 Ball joint replacement how to,easy, nut and bolt upper and lower

No video

Dodge ram 4 x 4 1500 Ball joint replacement how to,easy, nut and bolt upper and lower

Рет қаралды 58,399

Күн бұрын

In this video I’m going to show you how to remove the upper and lower ball joints . I also give you the socket sizes and show you my supersecret tips on getting things to come apart without destroying them. There are several videos that show you how to remove these ball joints. Except mine shows you a way to remove them without costing yourself more money $ by destroying other things while doing this job. hopefully find a video to be helpful and informative send me your nice comments and give me 👍 ,also I have the “C” roll at the bottom of my videos so that’s fun. If you need to remove your lower control arm . there is also a video of that up on my KZfaq page.
2004 Dodge ram 4x4 upper and lower ball joint removal super easy tips and tricks how to, 2005 Dodge ram 4x4 upper and lower ball joint removal super easy tips and tricks how to ,2006 Dodge ram 4x4 upper and lower ball joint removal super easy tips and tricks how to ,2007 Dodge ram 4x4 upper and lower ball joint removal super easy tips and tricks how to, 2008 Dodge ram 4x4 upper and lower ball joint removal super easy tips and tricks how to ,2009 Dodge ram upper and lower ball joint removal super easy tips and tricks how to ,2010 Dodge ram upper and lower ball joint removal super easy tips and tricks

Пікірлер: 51

@28drafting Ай бұрын

Very good video and narrating!,

@franciscoramos2413 Жыл бұрын

Do the facts thing on a FACTS THING VIDEO.

@sharpcarco 11 күн бұрын

@briandavis8940 Жыл бұрын

one of the Best ive seen, no torches, im not going to tackle....

@sharpcarco Жыл бұрын

Maybe one day 😎

@crisashton573 4 жыл бұрын

Excellent video! Very detailed with clear video. Thank you!

@lifeinfernglenvalley6088 2 жыл бұрын

Anybody else miss like 2 minutes of the video from reading "if you sneeze too hard you can break a rib" ? 🤣

@billbly1691 5 жыл бұрын

Great job clay always enjoy your videos thank you

@Wally-pu2hh 4 жыл бұрын

Grand Rapids , I'm right here too .

@jaymiemcmann8238 4 жыл бұрын

From Muskegon

@TheSkysteve 2 жыл бұрын

thanks

@sharpcarco 2 жыл бұрын

You’re very welcome Steve

@arthurn9237 3 жыл бұрын

WELL DUN 👍

@ignaciocastelan1935 Жыл бұрын

Do you have the part numbers to the ball joints

@davidcrowson4745 4 жыл бұрын

Very helpful and thank you 😊

@simonpicken6055 2 жыл бұрын

Great job!…What brand of ball joint’s did you install?

@sharpcarco 2 жыл бұрын

Moog Thanks for the kind words and welcome to the channel happy to have you

@donnheadley3960 4 жыл бұрын

Great, thank you!

@raycano2707 Жыл бұрын

would like torque setting if needed

@zone6theohiostate119 4 жыл бұрын

Had to click away stupid little facts take away from people trying to learn

@sharpcarco 7 ай бұрын

Bye Felicia…..

@sugargoldy 4 жыл бұрын

Good job boys

@thewolf8848 3 жыл бұрын

dont be fooled by your local part store, there is a difference,most of them are marked-l -left-r-right.

@Wally-pu2hh 4 жыл бұрын

My 2009 Ram 1500 rocks like a seesaw , does it need a strut replacement ?

@sharpcarco 4 жыл бұрын

Hello I’m sorry to say I’ve been braided for giving bad advice on the past. And I’ve still got a sore butt from it so without driving this vehicle unfortunately in this situation I would probably not be able to help you

@Wally-pu2hh 4 жыл бұрын

Understandable . I could bring it through there

@ffemt1187 3 жыл бұрын

Do you have to replace the upper control arms?

@sharpcarco 3 жыл бұрын

Depends on If they’re no good I don’t replace parts unless it’s necessary I’m very cheap like that

@user-xk3sg4zq1s Жыл бұрын

Just pull out the 1-3/8 for a 35mm fastener.

@db477 4 жыл бұрын

My 05 calipers go the opposite way, Are there no camber bolts on these?

@3dp_edc 3 жыл бұрын

ive been beating on my upper for the better part of a day and still dont have the stupid thing out.... you give it two whacks and it pops out like butter.

@sharpcarco 3 жыл бұрын

It’s not that you’re hitting it it’s the way that you’re hitting it…… Trust me when you get it every time they will pop right out and you can’t hit it like a little girl

@3dp_edc 3 жыл бұрын

@@sharpcarco tie rod popped right on on the first swing idk this thing is stuck good. the aluminum is dented in pretty damn far already from whacking it so hard. dont think hitting harder is the key. im about to go buy a separator see if that works. the upper is recently replaced (april 2021) so trying not to damage it in the process either, or id just use a pickle fork on it

@sharpcarco 3 жыл бұрын

Yeah maybe so I’ve just never not been able to get them to come off the way I show you in the video but I guess it’s possible

@3dp_edc 3 жыл бұрын

@@sharpcarco bought a separator and made quick work of it!

@sharpcarco 3 жыл бұрын

I’m sorry you had to do that but I’m glad it worked out for you brother The only reason I show that technique is so that if you’re not replacing the component you don’t destroy it if you replacing it it doesn’t matter if you destroy it but may be some people are doing other things and I’ve never seen it not work like I said before but it is certainly possible

@JacksonGuitarsPlayer03 3 жыл бұрын

Are the ball joints and front drive shaft greaseable? I appreciate it if someone lets me know... also I’d like to know all the grease points. 03 ram 1500. Be cool if someone know. 👍🏼

@noidontthinksolol 7 ай бұрын

yes, ball joints are greasable. the drive shaft is greasable too but you have to undo the rubber which nobody does. you should only regrease it when you had a torn rubber

@JacksonGuitarsPlayer03 7 ай бұрын

@@noidontthinksolol I knew about ball joints being greaseable lol why did I ask that 😆

@JacksonGuitarsPlayer03 7 ай бұрын

@@noidontthinksolol I found all of this out appreciate the comment though 👍🏼👍🏼👊🏼

@jeffa847 11 күн бұрын

@@noidontthinksolol Is that true on a 2007?! I never saw any zerks - is there some other way you are doing that?

@noidontthinksolol 11 күн бұрын

@@jeffa847 you undo the tie wrap and add a new one after greasing. but when its not broken you shouldnt

@RozetRides 3 жыл бұрын

You aren’t removing a factory ball joint. This is literally every other video about removing ball joints.

@sharpcarco 3 жыл бұрын

The only difference being that I show you how to get it out without being a pain in the ass..,..

@dannytorres8348 3 жыл бұрын

You did not provide torque specs for all nut areas.

@sharpcarco 3 жыл бұрын

Sure don’t……. I’m surprised if supplied any That’s what Google is for and if you do supply them you get knuckle dragger’s that just tell you that they’re incorrect so I don’t put them in most of my videos for that reason