Trouble Shooting a Downhill Weld-Welding Methods.

Рет қаралды 66,357

5 жыл бұрын

What you need to know about how to control your weld puddle, heat or amps to help put a downhill welding root in. Little welding tips and tricks about controlling finger nail with 6010 serious downhill rod. Also how to handle a tight and wide fit. Heck we even through in some High low just to make it even more fun. I am a firm believer in once you have the welding fundamentals down you need to learn how to number one fix your weld and number 2 how to weld things that are not fit correctly. Hope you enjoy and hope your able to pick up on a few things. Be blessed

Пікірлер: 78

@WillyD1 2 жыл бұрын

Bro thanks to you I passed my 5 p downhill 6 inch schd 80 pipe test I’ve tig welded and 7018 stick most of my time in the trade but I learned my 5 p downhill from you I passed my test yesterday thank you bro these vids saved me and my family’s life’s for real can’t thank you enough

@johndoe43 Ай бұрын

Good video as always.

@JacobSchofield Ай бұрын

Glad you enjoyed it

@michaeljennings5014 5 жыл бұрын

Great info on fighting high low and fingernails. Took me a while to learn how to manipulate the rod to counter that. Thanks for the video.

@Imthemfman 5 жыл бұрын

I didn't really understand he confused me, was he saying point the rod and the arc towards the side the puddle is sticking too, Or point it to the opposite side the puddles not sticking too?

@michaeljennings5014 5 жыл бұрын

@@Imthemfman move the rod towards the fingernail. Its counter intuitive like a rudder on a ship.

@davidbennett5601 3 жыл бұрын

Have been welding for 37 years, everything under the sun but NEVER down hill. Been running this on 6in. for the last 2 weeks. Much respect to your skills, I teach welding and thanks for a great down to earth smack down. I tip my hat to you. Mine looks nothing like that.....

@boricuaarecibo9259 2 ай бұрын

Great video I learned something

@JacobSchofield Ай бұрын

Glad you enjoyed it

@plumbfit727 5 жыл бұрын

Jake, you the man. Keep doing what you do.

@wadewittman8510 5 жыл бұрын

Great video buddy! Thanks for sharing the details 👍🇺🇸

@cjgibbons5850 5 жыл бұрын

Right on keep em coming!

@plumbfit727 5 жыл бұрын

Good work, had to show this to a friend. He liked it as well.

@richardsolomon8076 5 жыл бұрын

Great again Jake thanks for sharing

@wademoore438 5 жыл бұрын

love the instructions, I need way more practice,your a ace Jacob Schofield.

@greggschultz5768 4 жыл бұрын

You nailed this one. Too many guys don't practice misfits and they need to as you will run into them more often than you think. Great information man!

@JacobSchofield 4 жыл бұрын

thank you Gregg you have to be able to fix things for sure.

@jad2484 3 жыл бұрын

@@JacobSchofield Hey Jake what kind/brand of shirt is that. I like it. I wear Martin Brothers.

@mandylad 3 жыл бұрын

Great job..i learn alot of tips watching you..thanks for sharing it's very helpful watching you ..

@Blue_Collar_Hunter 5 жыл бұрын

Great video! Alot of good info again. Keep it up brother.

@FISHBREATHH 5 жыл бұрын

Jake you have a great on camera presents , keep it up. give that bride of yours and you boy a big hug for me, Take care. Dave

@1greencuda 4 жыл бұрын

learning to weld with one hand is the best advice that you can give to anyone , I have one hand one the remote and one on the stinger at all times . If that red half moon gets close and catches up with the rod crank it up . light up with 5/32 on top then switch to 1/8 on the tight bottom .

@FranklinBallowe 3 жыл бұрын

Tricks of the trade! 👌🤠😎

@guymcmullan9297 5 жыл бұрын

Great video.

@dodgendeere8768 11 ай бұрын

Man I know you’re busy with life, we miss your vids brother! I hope everything’s going good!!!!

@JacobSchofield 6 ай бұрын

Thanks brother. Were good now, just had to take care of some priorities first, but we're back. Check out the 'channel updates' playlist for the exciting news!

@albertsewell878 5 жыл бұрын

Good one there bro.

@WelderPro-DaliRasco 4 жыл бұрын

Very good work jake 😉🤙

@robertchaffee7737 5 жыл бұрын

Nice welding Jacob

@samjones2752 5 жыл бұрын

Jake, Love your work mate and thanks for the instruction and help your putting out there. You gotta stay healthy though, check the new guidance from the UK Health and Safety Executive on mild steel welding fume now classified as carcinogenic. It's advised RPE (air fed hoods) is used even outdoors to protect the welder and anyone in the area. Burn hot and stay safe brother...

@dalejacaway4881 5 жыл бұрын

Awesome video man thanks if you do another one I wouldn't mind seeing more of the finished weld after you're done welding and explain how you controlling it and why the world sitting the way it is cuz sometimes I think I'm running just fine and then my weld doesn't sit but I'm not sure at what part I screwed up

@dalejacaway4881 5 жыл бұрын

And maybe make some of the mistakes you're talking about on purpose so we can see what they look like

@sammorris1452 3 жыл бұрын

Yessir good tips

@dixiemechanical8050 5 жыл бұрын

What settings are used on the camera to focus better on the weld? Most of the time it would appear over exposed and too harsh on camera, so great shots of the welds!

@mauriciosaldana6207 4 жыл бұрын

Jacob it's happened to me before wider on one side and tide on the other . Sometimes I just rotate my wrist a little it'll burn that fingernail off with some pressure also.

@josesuarez-di1np 5 жыл бұрын

Awesome Video Jacob, always wondered where you got that cool looking welding cap

@JacobSchofield 5 жыл бұрын

jose suarez blue collar caps

@jad2484 3 жыл бұрын

Jacob...planes do "landings" welders do "lands"

@florezisraelif Жыл бұрын

Hey Jacob I have been looking on the tube on how to weld 6010 all the way out for chill water I'm having trouble with it maybe you can show some of your experience with this process it would be greatly appreciated by the way good videoes

@wyattkappus4512 5 жыл бұрын

Do you know where any tests are? My buddy is looking for some

@goatsinker347 Жыл бұрын

If only someone made a stinger holder that has a slide knob, to control the amps as your welding, like a foot pedal does in TIG welding.

@brendanfair4108 2 жыл бұрын

So what's the trick too putting a bead in with 5)32 6010 on 42 inch hard pipe. Seems hard to keep your bead flattening out on the sides and bottom

@taneilsimpson4689 5 жыл бұрын

My passion welding works but ï am in college now sml just put gods firsts 📝👀🌎💪🏻🇺🇸🇨🇦👩🏻‍💻💶💶

@ronvonbargen8411 4 жыл бұрын

I'm not a welder. But I have seen a video of a guy that says you can use arc length whipping and how fast instead of changing amperage. Or is that not an approved way. Just curious and interested in what you guys do.

@stevehines Жыл бұрын

Save it

@walterdiczhazy2700 5 жыл бұрын

Where did you get the orange cable for the stinger and how long would you recommend getting it 100 foot

@austinbell1044 4 жыл бұрын

I believe he said i a previous video his are 125 foot

@brettsmith3173 4 жыл бұрын

what electrodes are you using

@melvinmariott8609 4 жыл бұрын

I like that you ant a welder if you can't feel up a gap.

@DavidLopez-ow1qi 5 жыл бұрын

👍

@jackmasse8227 4 жыл бұрын

What are you running you miller at for soft and stiff settings? Ive been messing with mine and cant get a good mix so I leave it around 5 stiff

@JacobSchofield 4 жыл бұрын

So I’m on 3 for my soft. I run everything about there. It’s a little more watery but you don’t really have to worry about trapping anytjing

@jackmasse8227 4 жыл бұрын

@@JacobSchofield ill try it out. Stock program?

@jad2484 3 жыл бұрын

What kind/brand of shirt is that?

@mightylaidlow1 5 жыл бұрын

I couldn't understand you but did you say if you punch through on the hot pass that its fixable? I'd like to see that.

@ethanpeden3011 5 жыл бұрын

Brandon D grind it down, run a 1/8 to repair hole, then hit pass over it. Happens everyday on the line. No biggie

@JacobSchofield 5 жыл бұрын

Just what Ethan said

@forresthaag6487 5 жыл бұрын

Anyone know where a good place to order a pancake hood at??

@juancarlosaguilar8743 5 жыл бұрын

Jacob, what is a tangent?

@JacobSchofield 5 жыл бұрын

Like in a 45 degree offset or what are you thinking?

@juancarlosaguilar8743 5 жыл бұрын

@@JacobSchofield WOW!!! You did answer! This is the first time I communicate with someone like this. Well back to "tangents". Just tangents in general. What are they and what are they used for?

@chaseallen9707 5 жыл бұрын

Long time no see

@JacobSchofield 5 жыл бұрын

chase allen I know sorry brother

@chaseallen9707 5 жыл бұрын

It’s fine

@chaseallen9707 5 жыл бұрын

How is Balin

@matthewtaylor7818 5 жыл бұрын

🧖🏻‍♂️

@METALMUNCHERS77 5 жыл бұрын

Why not use a 5/32 for larger opening in the first place.

@fittergrips2010 5 жыл бұрын

I've done both . if you have a wreck though it is a bigger wreck

@METALMUNCHERS77 5 жыл бұрын

Makes sense brother! Keep up the good work man enjoy all you videos

@LextechLighting 5 жыл бұрын

Genuine question...... Does everyone say Root like that in your area? (meaning regional slang, I don't know where you're from) Awesome job as always. I've been subb'd for a long time. Never seen a bad video yet.