Drag Racing Bush Plane gets custom carbon fiber door that can open in flight

Drag Racing Bush Plane gets custom carbon fiber door that can open in flight | Scrappy #36

Рет қаралды 265,197

3 жыл бұрын

Check out some of my Favorite Aviation Companies:
Best Tugs
www.besttugs.com/
Worlds Greatest Zip Tie!
www.griplockties.com/mikepatey
Avionics Systems
www.avionikits.com
Pratt & Whitney
www.pwc.ca/en
Turbine Service
www.covingtonaircraft.com/
BRS Parachute
brsaerospace.com/
Aircraft Engines
www.lycoming.com/
Carbon Cub Kits
cubcrafters.com/
Aircraft Lighting
aeroleds.com/
Garmin Aviation Products
garmin.com/Aviation
Aircraft Fabric
www.stewartsystems.aero/
Aircraft Lighting
flywat.com/
Alaska Bushwheels
www.airframesalaska.com/
King Shocks
www.kingshocks.com/
EarthX Batteries
earthxbatteries.com/

Пікірлер: 830

@slick1ton849 3 жыл бұрын

The “Dude, where’s my car” scene was hilarious! “And then!”

@28th_St_Air 3 жыл бұрын

And it was a perfect poke at his over elaboration.

@adrianioancucuiet346 3 жыл бұрын

And then?

@owensparks5013 3 жыл бұрын

Seven planes and not a wing to be seen. At this point they're revelling in our suffering and anticipation 😉👍👍

@kevinstephenson3880 3 жыл бұрын

Ditto!

@dogcreek8547 3 жыл бұрын

Come on man! Mike takes things to explosion level. I love watching him. He is not superman. Give it a rest

@YSALF 3 жыл бұрын

@@dogcreek8547 Team X & SpaceX share same spirit

@terrymargieduvall4808 3 жыл бұрын

He'll lose any Stol competition with this plane if that's what he's building it for. Maybe it's just for looks.

@YSALF 3 жыл бұрын

@@terrymargieduvall4808 It depends. I have no doubt that he designed a wing increasing its area to reduce its wing loading per ft2...

@pieissquared 3 жыл бұрын

Scrappy needs to be on the main floor of sema next year. To show them what real quality work is. Not the 20 foot cars they put in the booths.

@Crewsy 3 жыл бұрын

Some times 20 feet isn’t even enough to hide the flaws.

@quickdeuce 3 жыл бұрын

@Cindy Klenk I so agree Cindy,, Mike has the patience of Jobe, the mind of Thomas Edison, and the quality mindedness of street rod builder Jeff Lutz,, his work is incredible!

@RWBHere 3 жыл бұрын

@@quickdeuce If Job was around today, I wonder what he would think of the Patey twins? 😉

@benjimun1 3 жыл бұрын

LASTLY..... NONE OF OUR ADMIRATION FOR MIKE IS POSSIBLE WITHOUT YOU MY BROTHER RON..... 95% THE HIDDEN GEM BEHIND THE CAMERA

@jjarango2 3 жыл бұрын

All over the world we are carefully following the construction of "OUR" new aircraft. I can't wait to see it fly.

@imaner76 3 жыл бұрын

I can't wait to see the queue to fly "OUR" aircraft... 😮 🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍🧍‍♀️🧍🧍🧍‍♀️🧍🧍🧍

@Jonnydeerhunter 3 жыл бұрын

Ditto!

@Jonnydeerhunter 3 жыл бұрын

@@imaner76 Lol

@dinobot_maximize 3 жыл бұрын

da, comrade!

@dinobot_maximize 3 жыл бұрын

@@imaner76 lol the number of women seems accurate, i guess

@alfatechniks887 3 жыл бұрын

Mike, your wifey says, if you can’t beat ‘em, join ‘em! Love the way you can all play together as a family and share your passion and energy, that’s awesome.

@russguppy8761 3 жыл бұрын

I love the sound of the door frame connecting with the rest of the plane. No clunk, bang, bounce. Just click. And it’s not even finished. Sound like high quality. Excellent work. Excellent team.

@sdcaclint 3 жыл бұрын

Dude! Its been 3 weeks man. Your builds are amazing, and I can't get enough of them. Can't wait to see the progress from the Mrs., Scrappy, and the re-life of Draco. I'll patiently wait for an update(mostly). You are such an inspiration. Your whole family actually. That boy is a chip off the ole block. I bet those jet skis turn out top notch. Thank you for letting us come along for part of the journey. Cheers to the IRL Tony Stark

@mooman351 3 жыл бұрын

Its a Christmas miracle, Mike video to watch in bed on Christmas morning while waiting for the kids to wake up

@ryanschaff2507 3 жыл бұрын

That’s weird. It’s 3pm Christmas Eve here and I’m laying with my 4 year old to get him to take a little longer of a nap before Christmas Eve festivities begin! What part of the world are you at? Anyway Merry Christmas, have fun with the kids, it really is the beat day of the year!

@mooman351 3 жыл бұрын

@@ryanschaff2507 Australia, just after 7am now and the kids are elbow deep in presents

@richarddoyle689 3 жыл бұрын

Great idea, just started watching and then read your comment. Now saved for a morning watch on the big screen before the rest of the house wakes up on Christmas morning. Time here 8.13pm Christmas Eve - Winchester, England. PS Happy Holidays to all :-)

@mikepover3253 3 жыл бұрын

I’ve just done the exact same thing.

@REDMAN298 3 жыл бұрын

I feel sorry for the people who can`t laugh at stupid humor like this. Ol` Red is sick. bwahaha

@bluereaper88 3 жыл бұрын

15:00 Now that's what I would call some fun family time. Great to see all of you again!

@honestspirit56 3 жыл бұрын

Always a pleasure to watch the master of carbon fiber, and his creations as they come to life. Thank you Mike and Family.

@garyvanvuuren199 3 жыл бұрын

The attention to detail, and the craftsmanship in this build is simply staggering. Makes me so happy :-)

@adriangpop 3 жыл бұрын

Are you absolutely sure of the wisdom of losing an emergency exit? Happy Christmas to you and your family and thank you for sharing all that you do with us. Bless you.

@MattThornton87 3 жыл бұрын

Yeah I wondered why he didn't mention the left window being able to be pushed out in an emergency. Presumably it could? Great video as usual by Mike. Fascinating to watch the build develop :)

@adriangpop 3 жыл бұрын

@@MattThornton87 I would have both windows opening, it just seems like a no brainer to me.

@tomcoryell 3 жыл бұрын

I think it’s cool that you took a negative like the tape sticking to your carbon fiber and turned into a positive. Also, paint stirrers and duct tape! Brilliant! Just one of your doors would probably blow the whole budget for the plane I want to build....Very Cool seeing Mark, Chandra, and Jason building on their planes! I can’t wait to see all four of you buzzing Spanish Fork in formation.

@josiatokirina1788 3 жыл бұрын

What a gift! A Scrappy Video! Thank You Mike for sharing, explaining, teaching, and letting us be a part of the adventure and fun. AND THEN........"Can't wait for the next video".......AND THEN........

@Isaacmantx 3 жыл бұрын

Always love a Mike Patsy notification!!!! That’s some awesome engineering for a door!

@PapaPilot88 3 жыл бұрын

Merry Christmas to the aviation family! Hopefully 2021 is better for you all

@luczipkin 3 жыл бұрын

Early Christmas present: Scrappy video!

@gls9902 3 жыл бұрын

I LOVE how you over engineer "OUR" aricraft, just like I would.

@flycory 3 жыл бұрын

Yay

@deanmiles3505 3 жыл бұрын

Mike, Your work with carbon fiber is incredible and fascinating.

@Tanguero 3 жыл бұрын

Mike, I really love your channel. Your passion for aviation and attention to detail remind me of the better parts of my dad and grandfather. I never became a pilot, myself, but have a great love of aviation, particularly GA. Watching you build your projects is quite satisfying, even though I never got my pilot’s license. Thanks for filming (and explaining) all your builds. I have one request: please, film more close ups of the processes you describe in such delightful detail. As they say: a picture is worth a thousand words. Or as we say in the corporate presentation business: Show. Don’t tell. Keep up the great effort and continue building fantastic aircraft. Back to work!

@brianwills4398 3 жыл бұрын

I clicked on this video for 2 reasons. I love airplanes and my nickname has been scrappy for over 50yrs. Merry Christmas!!!

@tcerickson2621 3 жыл бұрын

Cool. The 7 of cubs club. Merry Christmas Mike and family.

@VirtanenDK 3 жыл бұрын

This just shows how important it is to work with something you like/love !!

@hackofalltrades446 3 жыл бұрын

Awesome pro tip using tape to set your "trim to" point for making composite bits... I've always done the same thing "inside out" I suppose for making parts out of aluminum, to where the tape would become a sacrificial barrier, and a movable point to file and stress relieve to. I've never thought about forming it into a piece of composite like that, especially since it's all going to get turned into dust like you said... I can't wait to see this thing out and about when it's flyable!

@DavidWood1970 3 жыл бұрын

Mike we all love watching progress on Scrappy but personally I’m looking forward to the video series watching Chandra build the “Bride of Scrappy”!!. Wishing all of the Patey clan a Merry Christmas!

@DavidHope1133 3 жыл бұрын

Guys. Imagine a ~3 hour long video of Mike Patey and Ed Seguin nerding out on all of the engineering done to Scrappy...

@gemsquashthg 3 жыл бұрын

Without fail you educate and entertain with every episode. I truly hope KZfaq doesn’t ever loose any of your episodes. So I can watch every episode again with my kids and show them one of the most influential people of my life. Mike you are a legend and a gentleman.

@r.p.3192 3 жыл бұрын

Jeeez the complexity is overhelming.... mind boggling... and that’s just the door... looks to me like a flying Swiss watch!

@TomisaburoRMizugawa 3 жыл бұрын

A typical American. Buying even air plane kits in bulk family-value packs ... ;-)

@TriDaddy 3 жыл бұрын

Needing some Scrappy in my life! Hope all is coming along well!

@gafrers 3 жыл бұрын

Wonderful. The RedGreen reference and clip made it even better. Quality as Always

@wayphun72 3 жыл бұрын

I love this guy! One of the things I like is that even though his videos are sporadic as for the frequency when they come out, they are full of content that us craftsman tune into for. He hasn't given into the weekly video craze that a lot of other channels have. He has stayed true to the craft and hasn't turned it into a homemade TV show that ultimately is all about the subscriptions and add revenue...he's got nothing to prove, and has remained original and true to the mission...build awesome stuff!

@robertwren2289 3 жыл бұрын

Unbelievable to have that much talent in the same shop. Just one word comes to mind watching you work, AMAZING. God has given you a brain that is filled with more talent than than most of us could even dream of. Merry Christmas to you and your enter family and that includes all those that you call family. Unto us a Child is born.

@TheScoundrel70 3 жыл бұрын

Whether you are into aviation or not, watching the Mike and Silent Ron Show is infectious and makes me want to match his passion and energy on my own projects.

@conawayfilms 3 жыл бұрын

Your drive and work ethic is incredible! You are a huge inspiration to aviation enthusiasts of all ages but especially to young aspiring pilots like myself. Thank you for the great content, keep it up Mike! 🤙🏼

@darcyw5586 3 жыл бұрын

Love how excited and enthusiastic you are about building you plane. Also how willing you are to share your journey and experiences to the world. Thanks Mike

@severus88700 3 жыл бұрын

As an aeronautical boilermaker I love your job on Scrappy!! Your videos are so interesting and they have a lot of enriching advices for me!!! keep going and Merry Christmas !!!!

@ColeAviation 3 жыл бұрын

This is gonna be the most epic flying Cub out there. 😁👍🏼 Mike you are doing such a fantastic job!

@TheBeardedEngineer 3 жыл бұрын

The REDGREEN Show!!!! Like reliving my entire childhood!

@dalewhite5015 3 жыл бұрын

Sitting here waiting patiently for more Scrappy! I love your craftsmanship

@jessegunderson2605 3 жыл бұрын

Is it weird that I come here and click 'Thumbs Up' immediately after the intro, before the show even starts? That thing fires me up every time. :P

@jonmichael4882 3 жыл бұрын

Finally....whew. Needed this.

@teddyabearo1066 3 жыл бұрын

Dude. 🤟🏽🐻

@raytheron 3 жыл бұрын

Scrappy installments have been the highlights of this year for me. So much utter awesomeness every time! Very chuffed, too, to get a glimpse of Chandra at work on her Cub; can't wait to see more. Above all, Mike, Chandra and your wonderful kids, have an amazing Christmas and the best New Year ever! Thanks for all you share with all of us, Mr 21st century Da Vinci!

@flyingkub 3 жыл бұрын

Just great look forward to seeing the finished door. It will be better than 90% of the production GA aircraft doors out there.

@stevenscott432 3 жыл бұрын

I was surprised you didn’t make a door on both sides. One of the coolest things I remember about flying a Bellanca Scout years ago was that both windows would swing up and latch on the wing and you could literally fly in an “open” cockpit.

@jginmt 3 жыл бұрын

I wonder if the decision was made in case of a crash to have the window fixed. Or maybe noise consideration. Mike let us know why you decided on one fixed window.

@brandonthompson9957 3 жыл бұрын

I would guess visibility. Full window vs. the bottom section having to contain a latch mechanism. Just a guess though

@samroesch 3 жыл бұрын

Yeh, seems less ideal for egress in a crash, if one side is blocked shut or has hazards (fire)

@dhyde9207 3 жыл бұрын

One of the few decisions on Scrappy that really doesn't seem to make sense.

@tatdexter2334 3 жыл бұрын

Your shop is starting to remind me of the AH-64 assembly line I worked on many years ago :) You and your family never cease to amaze! Merry Christmas to all

@walterweigert9840 3 жыл бұрын

Hi Mike! From South America, I wish you, your family and friends a Merry Christmas and a Happy 2021. Glad to see Chandra, Mark & frinds starting to build their own bush planes! The B.P. family is growing!!!! Thank you so very much for making this eternal lockdown in my country so much entretaining. I´ve enjoied it a lot and also learned a lot, so Thanks. I send all of you a big hug from NE patagonia, Argentina.

@Mike7478F 3 жыл бұрын

Fascinating watching a gifted builder create aviation parts. Good for you all building 7 or more carbon cubs going on. Can't wait for next install. Merry Christmas 🎄 ya all.

@ForFunFlyer 3 жыл бұрын

What?! Seven plane builds at one place?! 🤙🏻 Man, would've loved it to be there helping out! 😀 Oh, and awesome work! 👌🏻

@desertfox3860 3 жыл бұрын

Very nice, thanks. Merry Christmas to all of you!

@rydplrs71 3 жыл бұрын

Merry Christmas, thank you for letting us follow along

@johnreed8872 3 жыл бұрын

Hey Mike... I just wanted to take a second to thank you for making this past (really crappy ) year a little bit more bearable! Like your other viewers I can't get enough of your enthusiasm , excitement and ingenuity. Your passion for the present and future of aviation is inspiring! So Thanks again! PURE PATEY!

@Russellsperry 3 жыл бұрын

GREATEST KZfaq CHANNEL EVER!

@GlideYNRG 3 жыл бұрын

Thankyou for taking the time to explain what’s going on there Mike.. The doors need to be reliable and the in-depth explanation is hurting my head. Merry Christmas to you and your family from West Oz.

@beachboardfan9544 3 жыл бұрын

25:00 The door mating surfaces should be at an angle to each other, like two 45 degree angles. With them as they are now, if you crash and the frame flexes you run the risk of the door itself getting pinched in the door opening. If they're angled and the frame flexes due to a crash the door will get pushed out of the door opening and you'll be able to escape.

@fighterace140 3 жыл бұрын

Interesting, never thought of that...

@davewilshere 3 жыл бұрын

It’s nearly all carbon, it will either flex and return or break. It’s not like metal frames/doors which can bend and set.

@smalljetpilot 3 жыл бұрын

Santa, I want a scrappy for Christmas 🎄

@brianpetrow7218 3 жыл бұрын

must...finish...studying....THEN fine money to build plane...haha... Thanks Mike - Ron and everyone! Can't wait to see Chandra's spin, and Mark and Jason running against eachother...

@johndeereal1 3 жыл бұрын

Love how excited you get explaining things, it like watching your mind unfold, you are a wizzard !!!

@timothyhill1792 3 жыл бұрын

March on, what positive examples. Back to work!! Love yor family...

@scottgold5655 3 жыл бұрын

Such an amazing amount of work matched with your top level craftsmanship and attention to detail, Thanks!

@oldschoolhoosier 3 жыл бұрын

It would be awesome to see a Radio Controlled plane of Scrappy complete with a detailed signed certificate from Mike Patey in the future. 🇺🇸🇺🇸🇺🇸🇺🇸

@chaseweeks2708 3 жыл бұрын

It's still hilarious how easy you make building carbon fiber parts look. It must be a gift.

@cheesewhiz32 3 жыл бұрын

Love to see the Mike Patey and SV seeker collab.

@kylefrye6265 3 жыл бұрын

Incredible craftsmanship! Keep up the strong work!

@Dr_Kenneth_Noisewater 3 жыл бұрын

Tip of the cap for the “and then” reference from Dude Where’s My Car. 😂

@Jim_Austin 3 жыл бұрын

I always learn a lot watching these videos. I probably will never make use of the knowledge but it’s nice knowing it.

@doc-nobody-glider 3 жыл бұрын

Modern design, modern materials, strong engine, awesome performance to be expected :-) Keep on, all the best!

@Bill_N_ATX 3 жыл бұрын

We got a Scrappy and a Binky video on the same day! Two of our favorite over engineered and wonderfully, obsessively built objects of passion and determination. Thanks for a wonderful present. Merry Christmas and Happy New Year to all!

@FeralPreacher 3 жыл бұрын

What man can conceive he can achieve. Your conception is extraordinary. Merry Christmas and thanks for sharing.

@thereissomecoolstuff 3 жыл бұрын

Who in the world would be crazy enough to get in a plane and fly with Mike Patey. Got my straight jacket flight suit... Merry Xmas Patey Family. Enjoyed all the videos and hard work except for the Drago bending...God bless.. 2021 is going to be awesome....

@goatflieg 3 жыл бұрын

Seeing the mascot dancing around your work table got me thinking... you should make a music video called the Scrappy Dance!

@robertbradford7892 3 жыл бұрын

Beautiful carbon Fab work! fits like a Corinthian leather glove...👌

@ryanschaff2507 3 жыл бұрын

Merry Christmas to both Mike and Mark and their families! Thanks you all for being such an incredible inspiration and role model for us and our kids!

@Utkarshv3 3 жыл бұрын

The level of detail that goes into everything is just amazing , huge respect , keep pumping videoes .. cant wait to see more 🥰🤗😎

@cf6282 3 жыл бұрын

Mike you make it look easy! No drawings just right on the airframe. Which is already painted. I guess designing this by th industry would set you back many thousands of dollars before it gets built. Fascinated by your approach.

@gidderman 3 жыл бұрын

When i come home at night after a long day of work, i drink beer and watch this guy work. Professional supervisor am I....

@michaelrosebud 3 жыл бұрын

Awesome Mike, bout time you got back to Scrappy...I have been having anticipation withdrawals...lol Merry Christmas to you Mike and your family from Washington State :-) At 75 and a pilot since 1978, I thoroughly enjoy these builds, and what you are doing for Aviation, keep up the great work Mike :-)

@johnfife3062 3 жыл бұрын

Damn, Mike, that's orbital-grade construction. If you accidentally break atmo, it'll survive re-entry. Glad to see I'm not the only one who counts paint stir sticks and tape among the building blocks of the universe.

@robertbutler9465 3 жыл бұрын

New Scrappy video just in time for the holidays 😊 Thanks for the Christmas gift, Mike. Looking forward to 2021 when we get to see Scrappy completed and the long awaited start to the Draco 2 build. Hurry up and "Get Back To Work" 😃👍 Wishing you and your family a Merry Christmas and a Happy New Year!

@craigblankenship490 3 жыл бұрын

Amazing work as always. I love to see all the fabrication of the bird going together. Keep them coming.

@adamhughes2694 3 жыл бұрын

Love the Red Green clip!! Proud Canadian!!

@Utahdropout 3 жыл бұрын

Mike, I love the editing of this video. Overlapping the progress so we can see where you are going as you are describing it is great....!! Good job.

@leadgindairy3709 3 жыл бұрын

Man what a great family, all getting together and doing what they love, building airplanes! I wish I could just complete my 32hrs for my privates pilot license, just got too expensive for me, but to build and fly my own plane, what a dream that would that would be. So cool watching you though, love the videos!

@CAPFlyer 3 жыл бұрын

Man, you guys are upping your game. Red Green and Dude Where's My Car in one video. I knew I liked y'all. :-)

@xion1012 3 жыл бұрын

I absolutely love the enthusiasm that he gives off, I'm super excited to see how this thing flys

@denvershoemark8495 3 жыл бұрын

Best way to finish the year!!! Thanks Mike and Merry Christmas to you and your family.

@mtsledhead08 3 жыл бұрын

Wow! I love watching your videos man. A true craftsman. The amount of skill and knowledge you have blows me away! It’s always been my dream to learn to fly and these videos just throw av gas on that fire! What I wouldn’t give to hang out with you and learn! Keep em coming!

@ibgarrett 3 жыл бұрын

So I’m watching him describe the plan for the window... “normally there is bar through the middle, but I don’t want to do that”.... of course that makes sense... Mike says “nah - that’s the easy way, I’m going to make it better, stronger, faster...”

@kalel33 3 жыл бұрын

Did you deliberately do a 6 Million Dollar Man reference or just accident?

@timofeyserikof8397 3 жыл бұрын

Dear Mike, a lot of work has been done over the past year, as well as over the past decade. Your progress is impressive! I look forward with pleasure and impatience to each of your new releases! Let the New Year 2021 bring you new ideas, new inspiration and keep the old youthful passion and enthusiasm. Health to you and all your loved ones, well-being!! From Russia with love! Happy New Year!

@Dan_Bender 3 жыл бұрын

Not a better way to wait for the kids to get up and open presents. A Scrappy video!!! Merry Christmas!

@travismorgan4249 3 жыл бұрын

I love that you have the financial means to pay someone to do this stuff, but you still build almost everything yourself. You are one heck of a designer / engineer!

@SmittySmithsonite 3 жыл бұрын

Hope you, Chandra, and the kids had a fantastic, Merry Christmas, Mike!

@aerospot2 3 жыл бұрын

Merry Christmas! Thank you for your documented work. I resonate.

@lucky-gh5ox 3 жыл бұрын

This thing will be soooooo fun. Cant wait to see it flying.

@jimrogers2831 3 жыл бұрын

So interesting watching you build Scrappy. It's really going to be a great plane. Your knowledge of how to design so many systems involved is enviable to say the least. How's DracoX coming? A video coming soon on it? Jim R

@jghanson25 3 жыл бұрын

Video Editor deserves a raise. Editing in the references is ON POINT! More of The Office please!!!

@eiselbay 3 жыл бұрын

I check your channel everyday hoping for a new video. For a video about doors and window frames this was awesome! Can't wait to see them finished.

@hansuhlig8565 3 жыл бұрын

I think we are all ready for your next video!!

@RaptorsBlood 3 жыл бұрын

Thank you for adding the whole “and then and then and then”. So I didn’t have to go look for the clip and watch all of it. Merry Christmas from Texas!