Dyson Turbine Head Not Working Fixed ( Part 1 of 2 )

Рет қаралды 3,829

Green-Crocs-Fixes

2 жыл бұрын

Dyson Turbine Head Assembly Teardown

Пікірлер: 25

@craigb2657 5 ай бұрын

Wanted to send a thank you! The bearing that you show at <a href="#" class="seekto" data-time="486">8:06</a> was the exact problem that I had and all it took was a little WD-40 and machine oil and its working again.

@green-crocs-fixes1520 5 ай бұрын

Thanks Craig, happy to help and glad you managed to resolve 😎.

@simonwatmore257 3 ай бұрын

Brilliant Tutorial Will Help So Many, Excellent Thanks.

@green-crocs-fixes1520 3 ай бұрын

Thanks Simon, happy to help😎.

@harjitsamra1313 7 ай бұрын

Thanks. Your suggestion to oil the small belt cog worked.

@green-crocs-fixes1520 7 ай бұрын

Thanks Harjit, happy to help 😎

@elloragray6945 7 ай бұрын

Thank you so much! I have been searching the internet high and low for this

@green-crocs-fixes1520 7 ай бұрын

Thanks Ellora, happy to help 😎.

@AndreYeu Жыл бұрын

This video did it! It got to the part at <a href="#" class="seekto" data-time="474">7:54</a> where that was the part that was stuck on mine. Some lubricant and it started moving again. Thanks for saving me some money and plastics in the landfill!!!

@green-crocs-fixes1520 Жыл бұрын

Thanks Andre, Appreciated.

@patriciamclaren843 Жыл бұрын

Thank you so much - my head was slightly different but did the trick - feeling very happy - Thank you

@green-crocs-fixes1520 Жыл бұрын

Thanks Patricia, happy to help 😀.

@sonyyoung1036 7 ай бұрын

FYI. It is not necessary to remove all the parts after <a href="#" class="seekto" data-time="90">1:30</a> if you want to simply remove the hair from the turbine shaft You can remove the fastener holding the shaft in place as shown at <a href="#" class="seekto" data-time="250">4:10</a> and pull it out as shown. Thanks

@green-crocs-fixes1520 7 ай бұрын

Thanks Sony, but the title does say "Dyson Turbine Head Not Working Fixed" as it quite clearly was not working. Naturally one would not repair the unit then place the Brush head full of hair back inside. Other viewers have benefited from the video hence the views and comments, and you also can use the KZfaq platform to illustrate whatever you would like to present. Kindest regards.

@green-crocs-fixes1520 Жыл бұрын

Thanks Andre, Happy to help, and glad you have manage to resolve 😀.

@snowman4981 Жыл бұрын

Great Vid, thanks. Any chance you have the specs on the very tiny spring that popped out and disappeared (@ <a href="#" class="seekto" data-time="200">3:20</a>-<a href="#" class="seekto" data-time="225">3:45</a>)? Lost mine and if I had length and diameter and coil count I could find a replacement.

@green-crocs-fixes1520 Жыл бұрын

Hi Snowman, yes that tiny Spring can be elusive if it pops out into infinity. Sorry I have no idea of the size though it was very rigid. Maybe you can purchase an assortment box from eBay. Regards 😎.

@snowman4981 Жыл бұрын

@@green-crocs-fixes1520 Thanks for your response. Hopefully someone else tackling a repair can measure diameter and length and count coils of the spring and post the information.

@gabrielanunez4093 9 ай бұрын

Hello, a question how can I buy that part (the small part) I don't know how to look for it, thank you 😊

@green-crocs-fixes1520 9 ай бұрын

Hi Gabriela, I have also not been able to locate the part hence why I repaired it. There are various Schematics diagrams but no Brushbar Motor part available.

@gabrielanunez4093 9 ай бұрын

@@green-crocs-fixes1520 thank you for your help and answering I really appreciate it. You have a great day .