Easy configuration with the new DM01 / DMO2 from TOSEVEN motors, more options than Bafang or CYC

Рет қаралды 6,586

High Voltage DIY Electric Bikes and Vehicles

Күн бұрын

Пікірлер: 92

@Kirt44 Күн бұрын

Sounds to be the better solution regarding controls and that in my opinion dependent on how it is riding i would love to upgrade my mtb whit this

@gordonsteeves9950 6 ай бұрын

I am getting a TOSeven DM01, 1000 watt for my Catrike Expedition, looking forward to travelling this coming summer, thank you for the great video.

@HighVoltageKits 6 ай бұрын

You are welcome Gordon

@jonk8337 Жыл бұрын

Thanks for the video. I have 2 Bafang setups (BBSO2 and BBSHD) and I am excited about these motors, especially since the CYC Photon is at $950 in the US. I really want to upgrade to a torque sensing mid drive motor. I have a torque sensing rear hub setup which I love.

@HighVoltageKits Жыл бұрын

These will be coming in at much less than that. They need some polish still as you will see in my first test of the 02. I think they do have potential though.

@EVGizmo Жыл бұрын

Very refreshing something that works out of the box and doesn't give the user a headache to set up

@HighVoltageKits Жыл бұрын

I just broke it tho lol

@dieseldan1 2 ай бұрын

What broke?

@lukewalker1051 Жыл бұрын

Your content as always is of great interest to the ebike community and we await your assessment of these new motors. Also exciting news is a new battery supplier coming aboard that you support. Many of us are particular about what battery cells we have in our batteries because cell quality is so hugely important therefore if we can buy a 52V battery from your supplier with known cells be it 18650 or 21700...name brand and cell model is critically important....Samsung, Panasonic etc...then we know what to expect in terms of discharge current and longevity aka cycle life. Thanks again.

@HighVoltageKits Жыл бұрын

Thanks Luke. Should have some more thoughts on them later this week.

@Damienchristidis 28 күн бұрын

I just fitted my dm02 , I am yet to test it properly, but the initial tests are very positive

@HighVoltageKits 25 күн бұрын

Good stuff. Let us know how you get on!

@Damienchristidis 25 күн бұрын

@@HighVoltageKits Will do

@dennisvoltaire1146 Жыл бұрын

Thanks brother for the review

@HighVoltageKits Жыл бұрын

You are welcome.

@danielgreen4213 Жыл бұрын

Hi Captain hope you are well! Great video. Very interesting looking forward to seeing these motors in action. I'm very impressed with the settings out of the box on the display! It's very comprehensive compared to most other set ups from factory. Considering the price point of the motors they have done a good job it seems so far.. now for the testing!

@HighVoltageKits Жыл бұрын

Hey Dan. You can see the first quick test with the 02. Not the best start but I can see the potential.

@flixmyswitch 8 ай бұрын

Very new to look at getting a motor. Been through many channels. These toseven look to be the most friendly to use and best machined casing. Cant wait to get them in Europe. Love the open source

@HighVoltageKits 8 ай бұрын

There should be some more Europe options soon. You can have one shipped direct from TOSEVEN. If that is a route you wanted to take you can get in touch with a rep of theirs on our discord. I think there will be a UK option soon. Unfortunately not really Europe now with barriers that can make that kind of trade difficult and more expensive.

@flixmyswitch 8 ай бұрын

@@HighVoltageKits thanks other than toseven what other recommendations with torque sensors. May have to learn how to build batteries if it an issue.

@HighVoltageKits 8 ай бұрын

In ebike conversion motors there is the CYC stuff. The Photon at the lower power range and the X1 for higher power. There are a few other examples around but I do not know much of the merits of them. The CYC X1 is more powerful stock but also a bit more fragile and harder to fix and maintain when it goes wrong.

@ukrytykrytyk8477 Жыл бұрын

Great overview, looking forward to the next testing videos! I wish the wattage of DM01 was closer to Python but still good to see the market growing.

@HighVoltageKits Жыл бұрын

The 01 Peaks at 1700. Its also got a bit more mass to it and a higher RPM so I think it will do ok. I won't really know until I get it installed. The first test with the 02 did not go so well.

@mickp10 Жыл бұрын

Thanks for the overview. The ToSeven could be a great choice when someone is wanting something more than a Tongsheng , wants torque sensing the BBS02 doesnt , wants to use your existing battery the BBS M625 does not allow, but not pay the CYC Photon significant price. I will be watching the ToSeven closely to see if its a viable option for me. The only thing i don't get, is it appears you need to choose which voltage ToSeven version you want (e.g., unable in menu choose, 36v, 48v, 52v etc). Happy to be corrected , as if this is correct it is a deal breaker for me. I use a mix of 36v and 48v batteries from various bikes (Reention tigershark mount). Thanks

@HighVoltageKits Жыл бұрын

As far as I am aware you can pick those batteries in the menu system. I think it should be available though.

@mickp10 Жыл бұрын

@@HighVoltageKits thanks. When you test it, I would like your thoughts on the 500w version for road riding up a 1km 10% gradient . The thinking is if I get the higher power version it is heavier, and I will use more battery capacity (less range).

@nathangant7636 9 ай бұрын

The DM01 motor is compatible with batteries ranging from 48V to 60V. DM02 motor is compatible with batteries ranging from 24V to 60V.

@Bengy22 Жыл бұрын

I definitely agree the displayed information (at least with the one you have) leaves a lot to be desired for the main screen. Temps, battery voltage, time etc. They have it in the menus but would be nice to have it right there all the time. Hopefully a sw102 / eggrider can fix that. Excited for the ride footage hoping for good stuff!

@HighVoltageKits Жыл бұрын

There is a ton of real estate to use. I am hopeful that it could be done relatively easily. The functionality itself is all there.

@jonk8337 Жыл бұрын

These motors are open source and manufacturers want to sell as many units to individuals, vendors or suppliers as possible. They want these units to be able to satisfy many laws/restrictions. Could some of the programming or adjustments being not easily accessible be done on purpose? I imagine if these units were on bikes,such as a Specialized, they would sell them with certain restrictions preprogrammed to get around local ordinances/laws. Just a thought.

@MumfordJim Жыл бұрын

I’m interested in the DM02. Especially interested about heat. Have looked at the TSDZ2 with open source and it seems like you need to do special stuff to keep it from overheating. Hoping that the DM02 resolves that. Looking forward to you testing the DM02 prefer 52V battery. Enjoy your videos/comments.

@HighVoltageKits Жыл бұрын

Cheers. Ran into an issue a few kms in on the test ride. I need a program cable so in the meantime I may well open it up and have a look. Its significantly different in many key areas.

@Shreddykruger 8 ай бұрын

Iv had one for about a year it's never once overheated on me . Iv used it for xc mountain bike trails that are pretty steep.maybe if you live somewhere very hot it maybe a concern but in the UK it's been ok through the summer.

@Smegmeister Жыл бұрын

ooh look ar me being all early. I want to mess with one of these.

@HighVoltageKits Жыл бұрын

1st in! Epic handle by the way. I'm assuming it's because you are either a Red Dwarf fan or you excel in the use of high end kitchen appliances?

@stocksmk78 2 ай бұрын

would love you to do some videos on the truckrun motors

@HighVoltageKits 2 ай бұрын

I’ll put it on the list. Maybe they will send something out.

@visualrubble 3 ай бұрын

dumb question: is that the T24 display? According to the website they have about 8 displays to choose from - do you have any preferences amongst the smaller units? great vid btw, I can see I'll be spendig time here. :-)

@HighVoltageKits 3 ай бұрын

Yes this is a 24. So far it’s the only option with the motor as far as I am aware. They were looking at other options though

@capt.lennymiller6524 Ай бұрын

Size wise, is the DM01 larger, smaller or same size as the BBS02? Thanks, great video!

@HighVoltageKits Ай бұрын

It’s a little bit larger. About the same as the bbshd

@dalehall3110 Жыл бұрын

I have a BBSHD with an ASI BAC 855, be nice if you could run an aftermarket controller

@HighVoltageKits Жыл бұрын

We will be attempting it for sure.

@albertmonsieur7832 Жыл бұрын

not bad i hope they get a sw102 and 600c version for their motors i dont like these displays that have a seperate button control

@HighVoltageKits Жыл бұрын

There are no limits on displays as such. It would just need to be configured correctly on both sides.

@ryoukokonpaku1575 Жыл бұрын

Definitely would want a sw102 display. I like minimalistic displays, ideally also allow Bluetooth for OTA firmware updates and stats collection, even if I have to build an Android app myself since I already dabble wirh OSF programming .

@gabrielangel7686 3 ай бұрын

thanks for the overview of the settings. do you know how to configure 52v battery in this display ? thank you

@gabrielangel7686 3 ай бұрын

I forgot to specify, I'm talking about the DM01 750w

@HighVoltageKits 3 ай бұрын

You need to access the advanced menu and set the battery to custom then set the low voltage limit. There is another battery menu you can access with the top and bottom buttons pressed together

@Ale_Kor 4 ай бұрын

What buttons I need to press to enter on the main menu? I cant find any information about it.

@HighVoltageKits 4 ай бұрын

To get the advanced menu you need to have the top menu item selected from the first menu and hold up and down at the same time.

@iain.wlaird2275 4 ай бұрын

Just a quick question is it possible to cut back the brake sensor wires, if so what can I soldier to blank the brake sensor cable.

@HighVoltageKits 4 ай бұрын

I would cut it off and make sure the wires are not in contact before using some electrical tape on it.

@BobbyCync 3 ай бұрын

On the controller tab, can the motor voltage be changed?

@iain.wlaird2275 4 ай бұрын

Quick question, is it possible to get into the hidden menu with the DM02, any help would be fantastic.

@HighVoltageKits 4 ай бұрын

Try this video. I think it has the sequence on it. It can be tricky to time the first few goes. Easy configuration with the new DM01 / DMO2 from TOSEVEN motors, more options than Bafang or CYC kzfaq.info/get/bejne/e66HfdeQ27aXcok.html

@SamBuchmiller 2 ай бұрын

@@HighVoltageKits This is the same video this comment is under. The video skips how to access the hidden menu.

@FireMarshallStev 9 күн бұрын

@@HighVoltageKits as the other comment said, you linked to the wrong video. You linked to the same video we're looking at now with the DM01

@teemupekkala1068 2 ай бұрын

Do you know if dm01 supports 60v as in 16s? The website says so and some dealers too but i'm not sure if it really does.

@HighVoltageKits 2 ай бұрын

It’s supposed to. You might need to specify this to get a 60 volt version. I’d use a dealer in case of any issues

@Shreddykruger 8 ай бұрын

Hi you didn't show how you got in to the second menu?.😢

@HighVoltageKits 8 ай бұрын

Sorry. There is some documentation on discord now for that. In short though in the first menu. With the top menu item highlighted press the up and down arrows together and hold. Release when the password screen shows up. If you don't get it quite right highlight the top option again and repeat.

@Shreddykruger 8 ай бұрын

Thanks for the quick reply.what is the discord?.cheers

@mikk01975 26 күн бұрын

Got my motor installed yesterday and restricted the 1. level to 20 km/h and the 2. and 3. to 25. Still the motor gave me assistance far beyond that, so it's not really working, or I did something wrong... P.S. should those limits have an effect in all three modes (eco/city/sport)?

@HighVoltageKits 25 күн бұрын

Yeah they should do. Maybe join our discord server and post in the toseven rooms on there?

@philflip1963 Жыл бұрын

What I would like to be able to do is set an ebike motor to a profile that conforms to the legal limitations for a certain jurisdiction eg 250W Max power and Max speed 15mph for the UK and then be able to load another profile, eg. 'unrestricted' if I want to use this configuration in a place where it is legal. It would be best but not essential if loading the alternate profile were not straighforward, eg it had to be done via a phone app so that the police could not accuse me of quickly changing the profile. Can this be done with any of these motors?

@HighVoltageKits Жыл бұрын

You cam define the speed limit individually for each power level on the bike. The overall power is not definable. The power is set with the amps and the a % of that. In reality the police can only really test you for the speed limit. So if you can show the motor cuts off at 15.5 in a check you ought to be okay. Unless you were riding through a red light or something. There is no test for power outside a lab.

@philflip1963 Жыл бұрын

@@HighVoltageKits Cheers!

@stimpy_QC Жыл бұрын

hi i don't know if you could help me i am looking for an answer i am unable to find it hoping that you will be able to help me I bought this bike the onyx lzr pro and I would like to change the battery but in 48v is it possible without modifying anything else the engine is bafang m600

@HighVoltageKits Жыл бұрын

This is a question to post on discord under Bafang. You can post photos and video clips then as well. The link is in the description.

@pxl666 Жыл бұрын

can you do this with the smaller motor ?

@HighVoltageKits Жыл бұрын

Yeah. The menu systems are identical as far as I am aware.

@Shreddykruger 11 ай бұрын

Can anyone tell me how to adjust the abrupt initial engagement of the motor when you first pedal.mine pulls very abruptly on the first pedal stroke then is super smooth.

@HighVoltageKits 11 ай бұрын

There are three settings you can adjust. I thing lowering the top value will give you what you want if I recall correctly.

@Shreddykruger 11 ай бұрын

@@HighVoltageKits hi thanks for the quick reply which settings top value is it to be adjusted.iv still not managed to find the hidden menus yet the method I followed of another youtube video a German chap,doesn't seem to work the one share you put the pass code in.i can't even get to that screen.

@wapiti128 4 ай бұрын

@@ShreddykrugerDid you figure it out?

@Shreddykruger 4 ай бұрын

@@wapiti128 no I could never find how to get into the second menu.iv gave up on it now and bought a vitus mythique ebike insted.its up for sale if your in the UK midlands.

@wapiti128 4 ай бұрын

@@Shreddykruger Thanks. I'm in the USA. I appreciate your reply.

@syntxansyntxan7543 Жыл бұрын

This kit sieve to climb mountains without pedaling?

@HighVoltageKits Жыл бұрын

see other reply 😉

@georgeforeman89 Жыл бұрын

When you say it shows power in watts, is that motor power? Or is it rider power- as in like a cycling power meter

@HighVoltageKits Жыл бұрын

I think it's motor power. I'd need to see it in action on the bike to confirm tho.

@georgeforeman89 Жыл бұрын

@@HighVoltageKits I think you're right. Power meters, even the cheaper knockoffs, are really expensive. I would be surprised if it was rider watts and would be even more surprised if it were accurate lol

@Alex-uh1mj Жыл бұрын

@@georgeforeman89only ever seen rider input on the tq120 motor

@ricksanchez3628 Жыл бұрын

Does Shengyi manufactur these motors?

@HighVoltageKits Жыл бұрын

I don't think so.

@Alex-uh1mj Жыл бұрын

@tamholt3494 Жыл бұрын

Where are these motors for sale?

@HighVoltageKits Жыл бұрын

The dealer network is being setup. Eco Cycles I think will stock the 02. Best bet is to post on Discord.

@christianfricke9222 Жыл бұрын

Great video, but please, if you hold a disply, which is the center of interest, don't talk with your hands. Just put the stupid thing on the table. I got sea sick watching the video. Sorry. So no configuration software with this motor. How do you store settings while changing the configuration for best match with your application? Trade secret?

@HighVoltageKits Жыл бұрын

No trade secrets lol. There is a exit with and without saving. I put all the screens and parameters on a pdf on discord if you are interested in them. I should have found a way to keep it still. I will in the future. Appreciate the feeding. Thank you.

@HighVoltageKits Жыл бұрын

There is a program cable. Waiting on delivery!