Just found your channel, have subed! I'm 60 yrs old. Firewood guy. For the home stove. Cut mainly oak and hickory here in Ga. For almost 25 years, my saw was a Husky 266 XP. It was a faithful friend and outstanding tool. Last year, it finally played out. Worn out. Multiple issues. I decided it was time to buy a new saw. I deserved it! Did not like the new Huskies. Read many reviews. I bought and held my breath a Echo 620. I'm a die hard husky man and it was hard leaving the brand. My first saw job with my new 620 was a very large oak log. I WAS SHOCKED at the power this saw had. Almost frightened. No lie. It is a bad mfr. More powerful than my 266! AMAZING POWER. On my own, I found the filter issue and placed a rubber O ring. I salute the Japanese engineers who developed this saw. It is destined to be a classic.

And for the record this channel is the reason I purchased an echo in the first place also that I discovered saw suppliers I've given them several of my paychecks thanks to you brody hahaha you are an amazing salesman my friend and I love how you break it down with every review

TRUTH! I completely agree and would highly recommend the 620.

You just saved me $55 on this saw!! Thank you!!! Thanks for the video too, great information!

This was fantastic. EXACTLY what I was looking to learn. It's so refreshing to get to watch a video with a guy that knows his stuff. Thank you sir!

Picked one up after watching this a few weeks back. Got a 28 inch Oregon bar on it. Cut down my first tree with it, 25 inch red maple. I love it.

Great video...glad I found it...gotta check out that airfilter...👍😁. I didn’t think about that O-ring... I just use the grease... I’m liking how your upgraded airfilter looks better too! I’m a really glad that Echo has really jumped back into the chainsaw game... 30 years of loving my echo’s and this past couple years they’ve really put a smile back on my face! 😂👍

My 620 is a beast. Outpulls a 362 and a 562 with buried 28 inch bars. Puts out a lot of oil too

That's so wierd, I just noticed today that my filter had dust on the inside and tonight I stumbled onto your video. Thanks for the tip on fixing it

Have a 362 Stihl needed repairs so I bought the 620P for a backup, that was over 2 years ago and the Stihl kinda retired. Bought more Echo's ❤

I've used my 620pw with 28 for almost 2 years in my tree service I've never beat on it but it's been worked hard burps on 3 pulls choke on from cold amd fires 3rd pull every time love that saw gonna buy another and keep it until I need it

One of my favorite 60cc saws! Love my cs620

I love my 620p it was the first saw I bought myself and I now have the 501p and just ordered a 7310 and these echos are hands down the best performing chainsaws hands down I also own the 562and 550xp as well as a jonsered 2172(my favorite saw it was left to me by my late uncle from his collection it was brand new And unused at the time of his passing and everytime I use it I feel like he's standing next to me ) I love them but these echos are just Animals unbeatable power and out of this world price and reliability

Thanks for the O-ring tip! Just purchased the PW version because of the full-wrap handle, & your tip just extended the life this great saw, so Many Thanks!!

I love my 620. I find I reach for my cs400 more often because it is so light. If I got big wood, the beast comes out to eat.

Just bought a 620PW last night. I've been wanting to get one for a long time now. Going to get into chainsaw carving with that and an echo 361 that I already have. I"ve been carving by hand for 15 years so it will be a fun change. I'd like to see more dealers in my area though. The one I bought my 361 from was only 20 minutes away but they closed down last year. I think they just wanted to retire. That left me w/ either ordering online or driving 40 minutes which is what I ended up doing and it was worth it. We do have a local repair shop that Echo lists as a certified repair shop but they only sell Stihl but at least they're close. Heck, I've been wanting to change careers. Maybe I should just start up my own dealership and repair shop. Easier said than done I'm sure but one step at a time. Thanks so much for posting the info.

Glad I found this channel. Great review and information!

I have one and love it I run 28” on mine all the time pulls hard!!!

Thanks for the shout out Brother!

Thank you for this review! Very detailed, still useful today!

What a great video! I plan on getting one.

Awesome. Ordering one now

Great video! Awesome information!

Thank you for the review! I just ordered the 620PW with the Echo 27" bar using the "Shacker" discount. Cant wait to rip into some hardwoods.

I've got the older 600P from 2012. Has been a great saw. I'd like to update to a 620 but just can't justify it since the 600 is still doing good

This video made up my mind . thanks for the code too saved me alot of money

Loving the channel and my 620p 💪

I have always enjoyed videos, thanks

Thanks for the informative video here. I just picked up a new CS-620PW, same saw with a wrap handle and 27 inch bar. I'm a little confused why they came up with a 27 and not an even number. The first thing I did after putting on the bar and chain was take off the air filter. I thought they had forgotten the o-ring on mine, because it seemed loose fitting. Now I know after watching this that it wasn't exactly forgotten. Seems odd. My last saw was a Husky 460 rancher, so I am hoping this is a good upgrade. Husky is 10+ years old and I don't have a single complaint with it, it just needed a big brother. Thanks for the comparison with 590 saws. I have seen other videos on KZfaq where they upgrade the coil and carb to what the 620 comes with stock. For anyone considering either, just get the 620, you won't be sorry.

New to your channel. Great Video on the echo 620 ! Lots of information everyone wants to know! Not just alot of cutting cookies ! I purchased the echo 7310p this year and its a awesome saw with NO problems. Again Thanks for your reviews my friend!

Great video! I just bought a 620p (I like German and Swedish saws, but money's been tight lately.) I wasnt expecting much but right outta the box I was not disappointed. I put 6 tanks of fuel through it so far, and i gotta say I'm actually very impressed! Its a LOT of saw for the money! Pulls harder than my old 362 and starts easier than my Stihl!

Just found this channel, and Im hooked, Ive been looking at this saw for a long time, i just need to save some money up for it, thanks!

Thank you after watching your video I bought a saw through Saw Suppliers, and subscribed and liked, Thank you

Great review! I was just about to pull the trigger on a Stihl 391 when I ran across this review. It hadn't occurred to me that the Echo 310 I've been using for light work and limbing for the last ten years has never given me any trouble, so why not go to Echo for my felling saw. My only complaint with the 310 is that I have to empty the unused b&c oil out of it after every use or it ends up leaking all over the place. I hope the 620 doesn't have that issue. I used your discount code at Saw Suppliers and got a $50 discount on the 3 bar and chain bundle. Thank you very much, Sir!

Thank you for sharing!

Good review . Waiting for a 680 review. Thank you Sir.

Lot of saw for the money. Thanks man for your review

Great Video very detailed. Thank you !!

Thanks man. Just bought a CS-620 with the coupon code. Great deal 👍🏻

good content.this guy is a giant clearly.for us smaller folks 28 is way overkill but love this saw

Just found the channel. I’m looking at the 620p to mainly run 24” bar/chain to cut down trees and cut them up for firewood. I’m currently using a husky 50 with 18” bar/chain and I’ve ran into it just ain’t enough saw although I think it’s a great saw and I sure ain’t getting rid of it I just want to expand my capabilities.

Best review I've seen on these saws brother 👍 Alot of saw for the money. Mite not be the fastest out there but they are built like tanks and last a long time under heavy use. The 590 is good but the 620 is better for heavy duty use for not much more money. Good point on the metal clutch cover and heat dissipation. That and having a free flow muffler to get rid of heat. Keep em cool and keep em sharp👍

I just bought this saw yesterday. I just decided to look up any videos on it and cam across this one. Thanks for sharing this is very informative. I am interested in finding out more about the motorcycle filter you mentioned. If you can, please post what it is or a link to where I can get one. Thanks much.

This might the one for me nice video Brother. I like what i see so far.

Nice review! Thanks! You know your stuff. That review was spot on. I still like the 562 better (actually Jonsred 2260) but these are a great saw, and great buy.

I bought this saw based on this video. 👍🏻

Another great vid!

Well you’ve made me want this saw over the 590 except I just found a new 590 for $250…. Can’t pass it up. Great vid.

620P / 620PW easily worth the extra over the 590 and then the SHACKER code makes it even better!

Great review brother

I put longer bar bolts and homemade spike outside and made roller chain catcher and added rubber motor mounts to make it solid for longer bar not just shaky av springs rim sprocket gutted muffler block top rear outlet pipe straight out the front CS 590 don't want the unlimited coil a bigger carb made it so strong and fast I want it to last got to put my degree wheel and timing light on it someday but no hurry

Any opinions on bar with the hole to be able to grease the nose of the bar compared to the bars where there is no grease hole? seems like there was an oregon bar with replaceable nose that does had a grease hole, but it is hard to find it. Is easier to find the power match bar with replaceable nose but no grease hole.

Thanks poster for '' the gd the bad the ugly'' --- my 620p engine is a beast, however, has anyone had problems with the chain constantly de-railing and cracking off the tensioner nipple and threaded shaft bolt? -- such a pain. Have only had saw use of seven meisley hours. The two outer main nuts stay tight which is so bloody confusing. I never dropped the unit and always lube.

Great video with even better talking point about the saw. I too have had a 562 and now have a couple 620 and the echo definitely cuts stronger. Love that muffler!!! Did you mod that? And do you have link for the filter? Thanks!!

Hi Brody bud . I don't know if you remember me but you gave me advice on greasing the needle bearing on my 501sx . I also have a 4310sx which is the 43cc pro European saw not available in the usa . Last week I just got my brand new 621sx which is pretty much the 620p . Tbh I was a little surprised with the weight of it but none the less its great and the torque is excellent. See I was a husqvarna guy but I don't have any husqvarna saws now love my echo saws

Best comparison I’ve seen between 590 and 620. I’d love to see your take on 620 vs 680, which is only $20 more and has a more traditional air filter and manual oiler.

I just picked up a 620p with 27 inch bar and full chisel chain based on this video. I love it! Thank you! I haven't had a chance to do the muffler mod or filter upgrade yet so knowing a little more power is in it's future is even better. Do you have any thoughts on putting a 28 inch lightweight bar and semi-chisel safety chain on it? I like the idea of getting the tip a little lighter for better balance and the peace of mind in using a semi-chisel safety chain. But I'd love your thoughts and any bar and chain recommendations if you have them.

Great review on the 620, I have never owned an echo, I see nothing but good reviews on them I live in interior Alaska where temps get as low as -50f, so I use my saws in very cold conditions sometimes, Stihl, Husky, Jonsereds, are the norm atleast where I live, how are the echos in extreme both hot and cold conditions as far as break in I heard it takes alot longer, I run my Jonsereds, they are my favorite it's to bad they aren't made anymore, I am partial to red/black dont ask me why, my question is the echo 620 and the Shindaiwa 600sx are essentially the same saw much like a a husky 372 and a jonsered 2172, would a full wrap bar from a 620 readily fit a 600sx, also and this is a big one, why aren't the Shindies shown more love with the saw folks, can you do a longterm test on a Shindaiwa 600sx, I really want one with a good woods port, excellent video by the way very concise and informative, by the way my names Rich using my significant others phone.

Good man !!

you can upgrade a 590 to be a 620 but it would probably be cheaper to just buy a 620,but the 590's are great bang for buck as is. Likely the best for a 60cc saw

Cool videos, I own several pieces of echo power equipment including a blower, weed trimmer, and a CS-310. There's an echo dealer near my work so it's nice to run down there during my lunch break. I did decide to take advantage of your discount code and I ordered an old school CS-680 from saw suppliers. I was thinking about a Husky 372xp but why spend double the money? New subscriber here!

I own a Stihl. I want an Echo

Excellent review! Thanks a lot man! Would it be possible to do a similar video for the ECHO CS-680 now that you sold it to your buddy? Not much information around about that beast. Keep up the great work. 👍🏻

Can't thank you enough for this review... I'm still breaking in mine but I find it handles dogging in while bucking like a boss! My huskies like to have the RPM's up so dogging in isn't the way I run those. Who did your muffler mod if you don't mind me asking. I have a 20" bar on mine but I'm 5'8". Us short guys can buck with a 20" bar just fine! LOL

Is there a solution to CS490 that seems to let dust in around the cover screw ? And thanks so much on the o ring tip for my 620

Does removing the muffler baffle and limiter screws void the warranty?

Now that it’s been over a year since you’ve done this video I’m just wondering what your thoughts are about the echo CS-620p. Wondering if anything else has come up about this chainsaw?

Also, who did your muffler mod? That looks like more than just a ground out muffler... that welded pipe pushing the exhaust out the front is the way to go.

Over 1K subs & excellent episode! Thanks for sharing! What was that discount code again?

I’m thinking of the 620 as an upgrade from my old 455 rancher. Do you think the 620 has significantly more power than the 455?

Just used the code. Way cheaper!!! Thanks!

Im doing the muffler deflector mod today. Taking the limiters too. So hard not to go all out on the muffler. I just spent 25 hours porting a set of 781 BBC heads. Look at that muffler and all I want to do is bore a big hole in it, but not sure I want the noise.

Great video! Just found your channel. I’m ordering either the 620 or 680 very soon. Which one would you get to run a 27” bar? And what do you think about the wrap handles? Thanks!

Hello I just subscribed and I have watched your videos and I really like the way you do your videos, thanks , what would say about 602 & 680 for chainsaw milling?

You are in Green Lake, WI? Thanks for the link to this video in the comments section for my video. Should've bought the 620P instead, but couldn't afford it at the time.

Who did you get the air filter from ? Thanks

I’ve got a ms362, and a couple of 2156 Jonsered’s. They are good running 57-59 cc saws. I’m sure the Echo is right there, but claims of more torque and more power in the cut are just that; claims. Without dyno or another device to record torque or hp, you cannot accurately know. I’d like to try one out, I’m sure it’s a good saw.

Hi i,m over in the UK i,ma big Echo fan they aren,t as cheap over here when bought new and the resale value isn't as high as Stihl and Husqvarna .I have a CS501SX /CS501P and a CS610 its the predecessor to the CS620 does it have the X series engine as the 620 please regards Rob

About to do a muffler mod. What's a good safe rpm to turn the saw?

What's the difference between this saw and the Shindaiwa 600sx?

Echo for the smart man and Stihl for the grunts, if you like the ergos of stihl go for it, but stihl is riding the name today and is priced to show it, echo mag case vs stihl plastic, similar weight, better torque, cheaper but built better and usable power, you can’t beat it price weight power and quality, but let the brand boys and fan boys be fan boys

Great video. I live in Nowhere, Alaska and have a 620P coming by mail. What size o-ring do I need? Thanks so much.

New subr here. Cool video and great commentary man!! What bar mount does the 620 use? Is it comparable to the Husky small mount or large mount?

What’s up Broddi

So my five saw plan Echo 58V, 550xp, JonCutter 5800, 572xp, 395xp (some day) is turning into a six saw plan after watching this! Lol...

more fun the 620 vs 7310 ?

🤠🤠🤠

How fast do they ship,? Ordered one in July first haven't received new information about it.

Does it oil well?

Nice review but really, bigger bar is better for your back?! Hmmm i dont think so.

CAVEMAN, is that YOU?????

Been looking at the 620pw. I have a 450 rancher right now its a POS.