Thanks for this video it really helped me right now to service my motor, thought it was complex but I did it and eliminated the weird noise I was hearing
@EbikeRepairs2 ай бұрын
Glad it helped
@BenMitro3 ай бұрын
I was looking at you tear my wheel apart. Its exactly the same except for the tyre brand. I suspect there is a problem with mine too, so best I take it off and have a look. Thanks for showing us how.
@EbikeRepairs3 ай бұрын
My pleasure!
@jjung200522 күн бұрын
Dude! How old is the bike??!! Regular maintenance is the key to longevity like everything else.
@EbikeRepairs12 күн бұрын
A delivery bike...
@BugsworthАй бұрын
Tip: Have an old speaker near to hand for keeping bits safe as they come off. Just stick them to the magnet, a quick win!!
@EbikeRepairs27 күн бұрын
Great idea, thankyou!
@brucehutcheson53713 ай бұрын
When I first learned these motors had nylon plastic planetary gears, I thought I might swap them out for steel gears. After some time to take my motor apart, it appeared to me that the gears are not so difficult or expensive to replace when worn and the nylon plastic gears are much quieter than the metal gears. I think you've done a great job on your videos showing us how these powerful little motors work and can be serviced back to good as new again.
@EbikeRepairs3 ай бұрын
Thanks as always for the kind words - they can be replaced in around an hour if all goes well and you don't have to clean *too* thoroughly*
@Propelpurpose_2 ай бұрын
I intend to change the bearings of my motor, the one on the cassette side is shaky while the other is perfect, the only issue now is how to get it out as I don’t have the right tool, do you think is should just let the bearing stay?
@EbikeRepairs2 ай бұрын
Your local bike shop should have a bearing extractor, you could ask them for help? It makes sense to change it 'while you're in there'
@christopher-tg5zv6 күн бұрын
mine is doing a similar noise to the left side but wheel spins as normal when motor is not engaged but soon as i peddle even with motor off the noise come back also my disc brake come loose as soon as it started i thought that was the noise till i tighten it back up so im thinking its the bearing closest to disc brake has given up after 3 year/ what are your thoughts?
@christopher-tg5zv6 күн бұрын
after taken apart im afraid it was the gears it has the odd tooth iver missing or warped looks like most of grease has dried up
@sisterfixit4017Ай бұрын
How is the throttle thing you used to text the motor designed? I would love to make one for my shop.
@EbikeRepairsАй бұрын
It's just an old ebike controller, brainpower with s866 display with integrated throttle...
@EbikeRepairsАй бұрын
s.click.aliexpress.com/e/_DFvJPJZ
@sisterfixit4017Ай бұрын
@@EbikeRepairs thanks!!
@Boediprasetya2 ай бұрын
I experienced a problem that suddenly the direction of the BLDC motor's rotation changed so that the motor rotated but the wheels did not rotate. Has anyone ever experienced something like that?
@EbikeRepairsАй бұрын
Sometimes self learn wires on controller have shorter and need re learning I correct direction
@BoediprasetyaАй бұрын
@@EbikeRepairs My controller doesn't have a self learning wire. the only thing there is is a cable to the BLDC motor/hall sensor and to the SW900 LCD monitor/break sensor with a Julet connector. I use a BLDC rear hub. I have replaced/bought the controller 3 times and the last time it worked normally. Thanks Bro
@JohnnyWright-ft5zr2 ай бұрын
did you fix it
@EbikeRepairs2 ай бұрын
Yes I did 👍
@bennyhill42283 ай бұрын
I recently bought a rear hub motor from ebay, but the rear cassette won't spin backwards after tightening it onto the hub, any ideas what it could be? it spins freely off the wheel but as soon as i tightening it i locks solid, and won't spin backwards, the company sent a replacement cassette and that one is doing the same problem, any advice would be much appreciated.
@EbikeRepairs3 ай бұрын
You need a spacer behind the cassette! Bottom bracket shims work perfectly.
@thankmelater12542 ай бұрын
@@EbikeRepairs On Bafang motor diagram it shows the washer that has the locking bit on it, reversed from what the motor in the video has. The locking bit sticks outward and sits inside the forks.
@rhiantaylor34463 ай бұрын
Having see the mess on the rim etc. I suspect I would have worn gloves....
@EbikeRepairs3 ай бұрын
I did wash my hands 3 days later 😄😄
@Boediprasetya2 ай бұрын
what kind of mechanism is in the clutch?
@fmb9092 ай бұрын
The planetary gears around a freewheeling clutch
@EbikeRepairsАй бұрын
Sprag clutch, one way bearing
@lezbriddon3 ай бұрын
one way clutch has failed on the wifes bike, shes not said anything I dont think shes even noticed...
@EbikeRepairs3 ай бұрын
In the no assist way, or the no freewheel way?
@FurkanOz4803 ай бұрын
Man I had a motor like this it made like this noice but when it was running lets say it was kinda running tho making that weird noice and I couldnt get it anymore off the like gears do you have a tip to take that thing off without the weird tool u have